Xpelair XRH Remote Humidistat stopped working
 

My Xpelair XRH Remote Humidistat has just stopped working. Just outside the 12 months warranty of course.
The thing uses a nylon woven band to sense, and I guess some type of microswitch to activate. The thing is basically electro-mechanical.
I noticed it did not switch on when the shower was operated, then required turning up much higher to activate after a shower. It did however switch off after a while.
But definitely it has suddenly started playing up. I suppose there could be a spider in there, or maybe it does not like hairspray.
Anyone got one of these and had any problems ?
Any ideas?
Simon.

Xpelair XRH Remote Humidistat stopped working
 

In article ,
sm_jamieson writes:
My Xpelair XRH Remote Humidistat has just stopped working. Just outside the 12 months warranty of course.
The thing uses a nylon woven band to sense, and I guess some type of microswitch to activate. The thing is basically electro-mechanical.

Traditionally, those sensors were horse hair in which case hair spray
is probably instant-death. They might be something man-made now.
However, I'm surprised a switch which is only a year old is not using
an electronic sensor element.

I noticed it did not switch on when the shower was operated, then required turning up much higher to activate after a shower. It did however switch off after a while.
But definitely it has suddenly started playing up. I suppose there could be a spider in there, or maybe it does not like hairspray.
Anyone got one of these and had any problems ?

A problem with a humidity sensor at this time of year is that it has
been 100% RH outside some of the time, and depending on the ventilation
and heating in the room, that can trigger it and/or significantly
reduce the change in humidity which the fan can achieve.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

Xpelair XRH Remote Humidistat stopped working
 

On Saturday, December 5, 2015 at 10:45:47 AM UTC, Andrew Gabriel wrote:
In article ,
sm_jamieson writes:
My Xpelair XRH Remote Humidistat has just stopped working. Just outside the 12 months warranty of course.
The thing uses a nylon woven band to sense, and I guess some type of microswitch to activate. The thing is basically electro-mechanical.

Traditionally, those sensors were horse hair in which case hair spray
is probably instant-death. They might be something man-made now.
However, I'm surprised a switch which is only a year old is not using
an electronic sensor element.

The woven nylon band is about 70mm long. I believe it is more sensitive than an electronic sensor when properly working. Its strange how it suddenly stopped working though, which makes me think it may be an insect inside or whatever. When I'll have time to look though who knows. I'll have to tell the family to switch it on manually.
The guts of the thing is a sensor available from RS if it comes to that.
Simon.

Xpelair XRH Remote Humidistat stopped working
 

On Saturday, December 5, 2015 at 12:16:22 PM UTC, sm_jamieson wrote:
On Saturday, December 5, 2015 at 10:45:47 AM UTC, Andrew Gabriel wrote:
In article ,
sm_jamieson writes:
My Xpelair XRH Remote Humidistat has just stopped working. Just outside the 12 months warranty of course.
The thing uses a nylon woven band to sense, and I guess some type of microswitch to activate. The thing is basically electro-mechanical.

Traditionally, those sensors were horse hair in which case hair spray
is probably instant-death. They might be something man-made now.
However, I'm surprised a switch which is only a year old is not using
an electronic sensor element.

The woven nylon band is about 70mm long. I believe it is more sensitive than an electronic sensor when properly working. Its strange how it suddenly stopped working though, which makes me think it may be an insect inside or whatever. When I'll have time to look though who knows. I'll have to tell the family to switch it on manually.
The guts of the thing is a sensor available from RS if it comes to that.
Simon.

the guts of it is this:
http://www.etcsupply.com/manuals/ranco_humidity.pdf

Xpelair XRH Remote Humidistat stopped working
 

On Friday, December 4, 2015 at 10:42:24 PM UTC, sm_jamieson wrote:
My Xpelair XRH Remote Humidistat has just stopped working. Just outside the 12 months warranty of course.
The thing uses a nylon woven band to sense, and I guess some type of microswitch to activate. The thing is basically electro-mechanical.
I noticed it did not switch on when the shower was operated, then required turning up much higher to activate after a shower. It did however switch off after a while.
But definitely it has suddenly started playing up. I suppose there could be a spider in there, or maybe it does not like hairspray.
Anyone got one of these and had any problems ?
Any ideas?
Simon.

Well, I cleaned out inside - there was some dust and little bits of debris that must have got in during installation. It relies on a roller which maybe was not moving freely. It is now working OK, although strangely the set point has moved quite a bit - too much for just the atmospheric conditions.
Since its a mechanical device maybe something slipped !
Simon.