Handheld sander velcro problem
I've got one of those electric sanders that you put three-inch
triangular pads onto. Except the velcro on the sander no longer grips them. What's the solution? -- Roland Perry |
Handheld sander velcro problem
Roland Perry wrote:
I've got one of those electric sanders that you put three-inch triangular pads onto. Except the velcro on the sander no longer grips them. What's the solution? buy a new pad and next time dont run a full speed and don't press so hard. the heat generated melts the hooks in the velcro. The early sanders were quite low power but the newer ones are 2 to 3 times more powerful and that creates more heat. |
Handheld sander velcro problem
In message , at 18:26:33 on Sat, 29 Aug
2015, Bob Minchin remarked: I've got one of those electric sanders that you put three-inch triangular pads onto. Except the velcro on the sander no longer grips them. What's the solution? buy a new pad The velcro part? and next time dont run a full speed and don't press so hard. the heat generated melts the hooks in the velcro. -- Roland Perry |
Handheld sander velcro problem
On 29/08/2015 18:02, Roland Perry wrote:
I've got one of those electric sanders that you put three-inch triangular pads onto. Except the velcro on the sander no longer grips them. What's the solution? Replace the pad - they are expected to be consumable items... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Handheld sander velcro problem
In message , at
21:28:09 on Sat, 29 Aug 2015, John Rumm remarked: I've got one of those electric sanders that you put three-inch triangular pads onto. Except the velcro on the sander no longer grips them. What's the solution? Replace the pad - they are expected to be consumable items... Obviously I've replaced the sandpaper pads many times, but I have never seen replacements for the velcro pads attached to the body of the sander available for sale. Suppose I just have to look harder? -- Roland Perry |
Handheld sander velcro problem
In message , at 22:05:07 on Sat,
29 Aug 2015, Jonno remarked: I've got one of those electric sanders that you put three-inch triangular pads onto. Except the velcro on the sander no longer grips them. What's the solution? Replace the pad - they are expected to be consumable items... Obviously I've replaced the sandpaper pads many times, but I have never seen replacements for the velcro pads attached to the body of the sander available for sale. Suppose I just have to look harder? http://www.amazon.co.uk/CEL-AC09-Tri.../dp/B003NS3IVE Noted. I'll try to find one that's specific to the sander I have. -- Roland Perry |
All times are GMT +1. The time now is 12:33 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter