DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   What a prick (https://www.diybanter.com/uk-diy/371514-what-prick.html)

ARW June 5th 14 07:01 PM

What a prick
 
http://www.thestar.co.uk/news/barnsl...ette-1-6655540

--
Adam


Tim Watts[_3_] June 5th 14 07:51 PM

What a prick
 
On 05/06/14 19:01, ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540



He applied an unusual blend of laziness and creativity to the problem at
hand.



Nick June 5th 14 07:56 PM

What a prick
 

"ARW" wrote in message
...
http://www.thestar.co.uk/news/barnsl...ette-1-6655540

--
Adam

I have used a soldering iron to light a smoke in the past. Only in the
workshop. Why the **** does this character have a soldering iron to hand in
the bedroom?
There's kinky.
Nick.



Bill Wright[_2_] June 5th 14 08:41 PM

What a prick
 
ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540


Athersley innit?

Bill

ARW June 5th 14 08:46 PM

What a prick
 
"Bill Wright" wrote in message
...
ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540

Athersley innit?



Athersley North.

--
Adam


GMM[_3_] June 5th 14 09:08 PM

What a prick
 
On 05/06/2014 19:01, ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540


Isn't that an example what ole C. Darwin was on about?

John Rumm June 5th 14 10:03 PM

What a prick
 
On 05/06/2014 21:08, GMM wrote:
On 05/06/2014 19:01, ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540



Isn't that an example what ole C. Darwin was on about?


only if he burnt his nuts off...

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

Brian Gaff[_2_] June 5th 14 11:12 PM

What a prick
 
Sounds totally bizarre.
Brian

--
From the Sofa of Brian Gaff Reply address is active
"Tim Watts" wrote in message
...
On 05/06/14 19:01, ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540



He applied an unusual blend of laziness and creativity to the problem at
hand.





Brian Gaff[_2_] June 5th 14 11:13 PM

What a prick
 
Don't most home electronic constructors do it in the bedroom?
Brian

--
From the Sofa of Brian Gaff Reply address is active
"Nick" wrote in message
...

"ARW" wrote in message
...
http://www.thestar.co.uk/news/barnsl...ette-1-6655540

--
Adam

I have used a soldering iron to light a smoke in the past. Only in the
workshop. Why the **** does this character have a soldering iron to hand
in the bedroom?
There's kinky.
Nick.




Brian Gaff[_2_] June 5th 14 11:16 PM

What a prick
 
Everyone knows smoking is bad for your health after all.


I can remember using a soldering iron once to 'widen' thethe end of a piece
of hose pipe to make it fit over a tap.

I was not prepared for the fumes though that nearly made me pass out!
Brian

--
From the Sofa of Brian Gaff Reply address is active
"ARW" wrote in message
...
"Bill Wright" wrote in message
...
ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540

Athersley innit?



Athersley North.

--
Adam




Johny B Good[_2_] June 6th 14 01:57 AM

What a prick
 
On Thu, 05 Jun 2014 22:03:25 +0100, John Rumm
wrote:

On 05/06/2014 21:08, GMM wrote:
On 05/06/2014 19:01, ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540



Isn't that an example what ole C. Darwin was on about?


only if he burnt his nuts off...


.... before getting the chance to procreate. At his age ("in his
thirties") he could well have had grand children by now.
--
J B Good

ARW June 8th 14 08:34 AM

What a prick
 
"Johny B Good" wrote in message
...
On Thu, 05 Jun 2014 22:03:25 +0100, John Rumm
wrote:

On 05/06/2014 21:08, GMM wrote:
On 05/06/2014 19:01, ARW wrote:
http://www.thestar.co.uk/news/barnsl...ette-1-6655540



Isn't that an example what ole C. Darwin was on about?


only if he burnt his nuts off...


... before getting the chance to procreate. At his age ("in his
thirties") he could well have had grand children by now.



:-)

--
Adam



All times are GMT +1. The time now is 12:00 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter