OT USB hard drive
 

Some long while ago, I bought a Buffalo USB 1Tb hard drive. It is
physically quite large and came with its own wall-wart PSU. I have not
really used it much. This week my ISP sent me a new router, which
included a USB Samba connection and I have now managed too get the
drive working via that.

If unused for a while, the hard drives in my PC power themselves down,
so I rather expected there might be some way to achieve that with the
Buffalo drive. It seems silly to have it running continuously if it is
not being used, but where the router and Buffalo are located, is not
easily accessed and some way away. Is there some way too set such a
drive too self power down after a period of inactivity please?

--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk

OT USB hard drive
 

Harry Bloomfield wrote:

If unused for a while, the hard drives in my PC power themselves down,

They do? I could imagine that they might spin down (ie stop rotating) and
therefore reduce their power consumption, but I'd expect their controllers
to stay powered-up, so that they could initiate a spin-up when the next I/O
request comes along.

so I rather expected there might be some way to achieve that with the
Buffalo drive. It seems silly to have it running continuously if it is not
being used, but where the router and Buffalo are located, is not easily
accessed and some way away. Is there some way too set such a drive too
self power down after a period of inactivity please?

I'd have thought the Buffalo drive would also spin down, but if it powers
off how would you then get it back on again?

I've a router with some sort of NAS capabilty (which I've not explored). One
of the problems with that, so far as I can see, is that if one plans to
switch off an attached drive one first has to dismount it from the router's
OS - which in practice means using a browser to login to the router,
navigating to the disk-controller page, and choosing 'dismount'. It's not
something I'd do very often...

--
Jeremy C B Nicoll - my opinions are my own.

Email sent to my from-address will be deleted. Instead, please reply
to replacing "aaa" by "284".

OT USB hard drive
 

Jeremy Nicoll - news posts expressed precisely :
Harry Bloomfield wrote:

If unused for a while, the hard drives in my PC power themselves down,

They do? I could imagine that they might spin down (ie stop rotating) and
therefore reduce their power consumption, but I'd expect their controllers
to stay powered-up, so that they could initiate a spin-up when the next I/O
request comes along.

They do, but having thought about it, its the operating system which
powers it down after a preset period of inactivity.

--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk

OT USB hard drive
 

On Saturday, March 8, 2014 1:47:14 PM UTC, Harry Bloomfield wrote:

Some long while ago, I bought a Buffalo USB 1Tb hard drive. It is
physically quite large and came with its own wall-wart PSU. I have not
really used it much. This week my ISP sent me a new router, which
included a USB Samba connection and I have now managed too get the
drive working via that.
If unused for a while, the hard drives in my PC power themselves down,
so I rather expected there might be some way to achieve that with the
Buffalo drive. It seems silly to have it running continuously if it is
not being used, but where the router and Buffalo are located, is not
easily accessed and some way away. Is there some way too set such a
drive too self power down after a period of inactivity please?

If there isnt one, you could plug it into a pc. ISTR unmounting spins them down.


NT

OT USB hard drive
 

On 08/03/2014 13:47, Harry Bloomfield wrote:
Some long while ago, I bought a Buffalo USB 1Tb hard drive. It is
physically quite large and came with its own wall-wart PSU. I have not
really used it much. This week my ISP sent me a new router, which
included a USB Samba connection and I have now managed too get the drive
working via that.

If unused for a while, the hard drives in my PC power themselves down,
so I rather expected there might be some way to achieve that with the
Buffalo drive. It seems silly to have it running continuously if it is
not being used, but where the router and Buffalo are located, is not
easily accessed and some way away. Is there some way too set such a
drive too self power down after a period of inactivity please?

You would need support for this in the router[1], since it is in effect
acting as a NAS device - it needs to control the drive based on the
demands of the network, not just one PC.

[1] Depending on what it is, it may have it, or even a capability to add
facilities.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

OT USB hard drive
 

submitted this idea :
On Saturday, March 8, 2014 1:47:14 PM UTC, Harry Bloomfield wrote:

Some long while ago, I bought a Buffalo USB 1Tb hard drive. It is
physically quite large and came with its own wall-wart PSU. I have not
really used it much. This week my ISP sent me a new router, which
included a USB Samba connection and I have now managed too get the
drive working via that.
If unused for a while, the hard drives in my PC power themselves down,
so I rather expected there might be some way to achieve that with the
Buffalo drive. It seems silly to have it running continuously if it is
not being used, but where the router and Buffalo are located, is not
easily accessed and some way away. Is there some way too set such a
drive too self power down after a period of inactivity please?

If there isnt one, you could plug it into a pc. ISTR unmounting spins them
down.


NT

That does work, but the idea was to be able to just have the router, an
IP camera and disk powered.

--
Regards,
Harry (M1BYT) (L)
http://www.ukradioamateur.co.uk

OT USB hard drive
 

On 09/03/2014 15:54, Harry Bloomfield wrote:

That does work, but the idea was to be able to just have the router, an
IP camera and disk powered.


If that's all its for then a USB memory stick would probably be better
than a disk.
You can get quite a lot on a 64g stick.

OT USB hard drive
 

On Sat, 8 Mar 2014 11:41:09 -0800 (PST), wrote:

On Saturday, March 8, 2014 1:47:14 PM UTC, Harry Bloomfield wrote:

Some long while ago, I bought a Buffalo USB 1Tb hard drive. It is
physically quite large and came with its own wall-wart PSU. I have not
really used it much. This week my ISP sent me a new router, which
included a USB Samba connection and I have now managed too get the
drive working via that.
If unused for a while, the hard drives in my PC power themselves down,
so I rather expected there might be some way to achieve that with the
Buffalo drive. It seems silly to have it running continuously if it is
not being used, but where the router and Buffalo are located, is not
easily accessed and some way away. Is there some way too set such a
drive too self power down after a period of inactivity please?

If there isnt one, you could plug it into a pc. ISTR unmounting spins them down.


I've noticed that spin down effect on USB drives when they're
unmounted. Slightly annoying for me is that this doesn't happen with
e-SATA connected drives.

It's quite possible that the Buffalo USB drive is already set to spin
down after a 10 or 15 minute timeout period (guaranteed to in fact if
they've used a Seagate Special).

The spin down of the internal drives in the PC will be mediated by
the power management features of the OS rather than the built in 1 to
15 minute programmable timeout that can be enabled in the HDD's own
controller.

The power management will simply issue a "Standby_Immediate" AT
command to the drive at timeout. Incidently the same AT command that
an SSD aware OS is _supposed_ to issue just prior to switch off when
shutting down.

The choice of using spin down power saving could be described as a
case of: a "Damned if you do. Damned if you don't." choice. What's
best depends on whether you value the electricity savings over the
integrity of your data which rather depends on your usage pattern.

If you're likely to only be working the drive just once or twice a
week for an hour or two's worth of intense activity each time, the
spin down power saving benefit outweighs the risk of disk failure due
to startup stresses and the effects of thermal cycling. In this case,
I'd be inclined to set a longish timeout period of an hour or three.

If you're going to be making frequent accesses in relatively short
bursts of activity throughout each working day, you'd be well advised
to disable power saving spin down (if you can - you won't have any
choice in the matter if the drive is a Seagate Special) or else set it
to a 3 or 4 hours timeout period so that it's only effectively spun
down once a day to give it an 'overnight rest'.

In essence, you're trying to avoid cycling the drive temperature up
and down more than 3 or 4 times a day. If you've any doubts over this
(and you value your data more than the 5 or 6 quid saving per drive on
the annual electricity bill), imo, you'd best disable spin down
altogether (discretion being the best part of valour in this case).

However, as I've mentioned twice already, you may have no choice in
the matter.
--
Regards, J B Good