 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
The antithesis to the Dark Internet; the Bright Internet
At work we have our network kit mounted on the wall. The idea is that we
can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? -- Rod |
|
#2
Posted to uk.d-i-y
|
|||
|
|||
|
The antithesis to the Dark Internet; the Bright Internet
On Tuesday 22 October 2013 18:41 polygonum wrote in uk.d-i-y:
At work we have our network kit mounted on the wall. The idea is that we can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? You could string a bit of neon "string" down the cable under a clear sleeve. http://www.neonstring.com/ However you would have to knock up a circuit that could control that. Unless you have access to engineers that could design a pickup that will a) work and b) not bork the signal, you would probably be better off making a little opto-detector that could be mounted over the port LED on the swictch that the cable is plugged into - then put a driver between that and the string. Also, neon string is probably quite a source of EM noise - it may not matter but it is worth bearing in mind. Clear sheathed Cat5e with a bloody bright blue LED taped to the end(s) could be another method if you can find clear Cat5e. It would all be very Heath Robinson - but it would certainly be cool so I for one am not going to disuade you! -- Tim Watts Personal Blog: http://squiddy.blog.dionic.net/ http://www.sensorly.com/ Crowd mapping of 2G/3G/4G mobile signal coverage |
|
#3
Posted to uk.d-i-y
|
|||
|
|||
|
The antithesis to the Dark Internet; the Bright Internet
On 22/10/2013 18:41, polygonum wrote:
At work we have our network kit mounted on the wall. The idea is that we can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? Seen these (well some other make, but similar concept) at work HARTING HA-VIS Smart Patch Cable http://www.youtube.com/watch?v=0afFzgtH_ro -- Adrian C |
|
#4
Posted to uk.d-i-y
|
|||
|
|||
|
The antithesis to the Dark Internet; the Bright Internet
On Tuesday 22 October 2013 19:37 Adrian C wrote in uk.d-i-y:
On 22/10/2013 18:41, polygonum wrote: At work we have our network kit mounted on the wall. The idea is that we can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? Seen these (well some other make, but similar concept) at work HARTING HA-VIS Smart Patch Cable http://www.youtube.com/watch?v=0afFzgtH_ro That would have been useful at one place I used to work  -- Tim Watts Personal Blog: http://squiddy.blog.dionic.net/ http://www.sensorly.com/ Crowd mapping of 2G/3G/4G mobile signal coverage |
|
#5
Posted to uk.d-i-y
|
|||
|
|||
|
The antithesis to the Dark Internet; the Bright Internet
On 22/10/2013 19:52, Tim Watts wrote:
On Tuesday 22 October 2013 19:37 Adrian C wrote in uk.d-i-y: On 22/10/2013 18:41, polygonum wrote: At work we have our network kit mounted on the wall. The idea is that we can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? Seen these (well some other make, but similar concept) at work HARTING HA-VIS Smart Patch Cable http://www.youtube.com/watch?v=0afFzgtH_ro That would have been useful at one place I used to work Nice idea, isn't it? Particularly nice that it operates entirely separately to the electrical signals. Just a shame we want it to act in concert to with them! -- Rod |
|
#6
Posted to uk.d-i-y
|
|||
|
|||
|
The antithesis to the Dark Internet; the Bright Internet
On 22/10/2013 18:41, polygonum wrote:
At work we have our network kit mounted on the wall. The idea is that we can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? Presumably the LED on the termination of the cable into the switch etc would be a good starting point. Either coupling to that electrically or optically to use it to trigger further lighting... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
|
#7
Posted to uk.d-i-y
|
|||
|
|||
|
The antithesis to the Dark Internet; the Bright Internet
polygonum scribbled...
At work we have our network kit mounted on the wall. The idea is that we can show people exactly what kit we have - two modems, a Meraki device for load balancing, etc. Part of the concept was that we would be able to "see" the data flowing by using cables that flash. (Especially useful when one of the lines is borked.) Unfortunately, now it comes to implementation, it is head scratching time. Is there such a thing as network cable that flashes? Or is that a mis-remembered thing which was actually USB or one of the other types of flashing cable that are available? You cheat with some fibre optic cable https://www.youtube.com/watch?v=lijy2n_kvlw |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
