Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
I've got an office with some servers on a UPS. From time to time, the
UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
Caecilius wrote:
I'm looking for something that can monitor the power quality I've got an old Seaward Mains Disturbance Recorder You leave it plugged in, it counts the number of transients, and has LEDs to indicate if the voltage has been out of range (mine's the old 240V +/- 6%, presume they are now calibrated for 230V +/- 10%) and if there's been a brownout for more than 1/2 a cycle, or 2 cycles. http://www.rnelectronics.com/meters/seaward-dr500-mains-supply-disturbance-recorder/flypage-ask.tpl.html |
#3
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 12:33:56 +0100, Andy Burns wrote:
I'm looking for something that can monitor the power quality Does your UPS not measure the volts and allow you to poll it for that information? You leave it plugged in, it counts the number of transients, and has LEDs to indicate if the voltage has been out of range (mine's the old 240V +/- 6%, presume they are now calibrated for 230V +/- 10%) Shouldn't be the spec never actually changed to +/- 10%. It's still 230 V +10% -6% (216 - 253 V). -- Cheers Dave. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
Dave Liquorice wrote:
the spec never actually changed to +/- 10%. It's still 230 V +10% -6% (216 - 253 V). I know te supply was +10%/-6% but I thought it had eventually changed (nominally) to +/-10%, or is it that appliances have to be designed to accept +/-10% now? |
#5
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 13:58:53 +0100, Andy Burns wrote:
... the spec never actually changed to +/- 10%. It's still 230 V +10% -6% (216 - 253 V). I know te supply was +10%/-6% but I thought it had eventually changed (nominally) to +/-10%, or is it that appliances have to be designed to accept +/-10% now? There was a date given to change to +/- 10% spec and appliances, a date several years ago but I'm fairly sure that any action on that date got quietly dropped and we (and Europe) have remained on the 230 +10% -6%. 230 +/-10% is 207 to 253 and a heck of range for kit to deal with. -- Cheers Dave. |
#6
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
"Dave Liquorice" wrote in message ll.co.uk... On Mon, 19 Aug 2013 13:58:53 +0100, Andy Burns wrote: ... the spec never actually changed to +/- 10%. It's still 230 V +10% -6% (216 - 253 V). I know te supply was +10%/-6% but I thought it had eventually changed (nominally) to +/-10%, or is it that appliances have to be designed to accept +/-10% now? There was a date given to change to +/- 10% spec and appliances, a date several years ago but I'm fairly sure that any action on that date got quietly dropped and we (and Europe) have remained on the 230 +10% -6%. 230 +/-10% is 207 to 253 and a heck of range for kit to deal with. -- Cheers Dave. Depends on the kit. A lot of stuff like TVs that would in the past have not enjoyed the mains fluctuating over these sorts of limits, now use SMPS with a PFC front end that doesn't care from 90 volts to 260 volts, allowing the same supply to be used world-wide. Many of these multi-stage switchers will actually start up at voltages as low as 30 volts Arfa |
#7
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 13:26:38 +0100 (BST), "Dave Liquorice"
wrote: Does your UPS not measure the volts and allow you to poll it for that information? It probably does. It's got a network card, sends email alerts, and I think it supports SNMP. I'll look into this. I had an event early Sunday morning, which resulted in the following emails (the contents of the emails doesn't really add anything): Subject: UPS: On battery power in response to rapid change of input. Date: Sun, 18 Aug 2013 00:27:14 Subject: UPS: No longer on battery power. Date: Sun, 18 Aug 2013 00:27:15 The RCBO didn't trip this time. One advantage of a monitor is that I could plug it into other outlets and see if it's ocurring on multiple rings/outlets or if it's just one. You leave it plugged in, it counts the number of transients, and has LEDs to indicate if the voltage has been out of range (mine's the old 240V +/- 6%, presume they are now calibrated for 230V +/- 10%) Shouldn't be the spec never actually changed to +/- 10%. It's still 230 V +10% -6% (216 - 253 V). |
#8
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
En el artículo , Caecilius
escribió: Subject: UPS: On battery power in response to rapid change of input. Date: Sun, 18 Aug 2013 00:27:14 You've got an APC unit. With a message like that, I'd be looking for a loose connection somewhere between the consumer unit and the socket it's plugged into. -- (\_/) (='.'=) (")_(") |
#9
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Wed, 21 Aug 2013 03:43:39 +0100, Mike Tomlinson
wrote: En el artículo , Caecilius escribió: Subject: UPS: On battery power in response to rapid change of input. Date: Sun, 18 Aug 2013 00:27:14 You've got an APC unit. With a message like that, I'd be looking for a loose connection somewhere between the consumer unit and the socket it's plugged into. Looking around the web, it seems this means that the rate of voltage change on the input was too high. It could be loose connection, but it could also just be the utility voltage changing too fast. It does change throughout the day, between about 220v and 235v (I'm monitoring the SNMP stats). I've reduced the sensitibity from "normal" to "reduced", as everything it's powering have switched-mode power supplies so don't really care too much about the input voltage or it's rate of change. |
#10
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On 19/08/2013 12:19, Caecilius wrote:
I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. In my office, I had to change the 16A MCB for a type C, as that would always trip on mains power restore if there was a power cut, which was kind of annoying! - It had a 3KvA UPS' on it, plus some other small non essential IT equipment we could live without during a power cut, so you might want to look at replacing the RCBO with a type C to stop it happening to yours too. -- Toby... Remove your pants to reply |
#11
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 14:45:15 +0100, Toby
wrote: In my office, I had to change the 16A MCB for a type C, as that would always trip on mains power restore if there was a power cut, which was kind of annoying! - It had a 3KvA UPS' on it, plus some other small non essential IT equipment we could live without during a power cut, so you might want to look at replacing the RCBO with a type C to stop it happening to yours too. I'm pretty sure it's the RCD part of the RCBO that's tripping though, so I don't think changing from a "B" to a "C" will make any difference because that's just the MCB part. Originally, I had six circuits (2 x B32 and 4 x B6) on one RCD, and that RCD was occasionally tripping. I never had any MCBs trip. I suspected the B32 circuit with the UPS/Servers on it, but wasn't sure, so I swapped out both B32 MCBs for RCBOs, and now the B32 RCBO for the UPS/servers circuit trips and nothing else. |
#12
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 14:45:15 +0100, Toby wrote:
It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. In my office, I had to change the 16A MCB for a type C, as that would always trip on mains power restore if there was a power cut, RCBO MCB ... IT/electronic kit tends to leak rather a lot to earth because of the filters on the mains input to keep all the nasty RF interference off the mains cabling. IIRC it's not recomended to have more than 10 such appliances on a single RCD. Switching transients may well create enough earth leakage current to push an RCBO that is already near its leakage limit past the leakage trip point. It could be a switching surge that a type C MCB would help with. -- Cheers Dave. |
#13
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 15:09:29 +0100 (BST), "Dave Liquorice"
wrote: IT/electronic kit tends to leak rather a lot to earth because of the filters on the mains input to keep all the nasty RF interference off the mains cabling. IIRC it's not recomended to have more than 10 such appliances on a single RCD. Switching transients may well create enough earth leakage current to push an RCBO that is already near its leakage limit past the leakage trip point. That's what I suspect I may be seeing. Perhaps the UPS contains MOVs which snub spikes to earth, so noise on the supply causes earth leakage which trips the RCD. |
#14
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 16:51:55 +0100, Caecilius wrote:
Switching transients may well create enough earth leakage current to push an RCBO that is already near its leakage limit past the leakage trip point. That's what I suspect I may be seeing. Perhaps the UPS contains MOVs which snub spikes to earth, so noise on the supply causes earth leakage which trips the RCD. MOVs breakdown at quite high voltages so a bit of "noise" won't trigger them. I'm thinking of a interuption and possible phase change when the UPS switches from it's internal frequency back to mains causing the capacitors in the filters to charge/discharge all at once thus dumping or pulling current via the earth. An RCD is only looking for an imbalance between L and N it doesn't care if that imbalance current leaking to earth or current leaking from earth... -- Cheers Dave. |
#15
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On 19/08/2013 12:19, Caecilius wrote:
I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. A really DIY approach would be to feed the output of mains transformer, possibly via a potentiometer, into the audio line-in socket of a PC. A wall-wart with an AC output (rare, but they do exist) would probably satisfy most safety concerns. You could record the waveform with audio software of your choice, presumably at a fairly low sampling rate. I'm not sure whether a typical integrated soundcard can go as low as 50Hz though. |
#16
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On 19/08/2013 18:26, MrWeld wrote:
On 19/08/2013 12:19, Caecilius wrote: I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. A really DIY approach would be to feed the output of mains transformer, possibly via a potentiometer, into the audio line-in socket of a PC. A wall-wart with an AC output (rare, but they do exist) would probably satisfy most safety concerns. You could record the waveform with audio software of your choice, presumably at a fairly low sampling rate. I'm not sure whether a typical integrated soundcard can go as low as 50Hz though. the range of human hearing is 20Hz to 20 KHz and many sound cards support LFE (Low frequency extensions) so I'd expect the sound card approach to work. In addition, subtracting a synchronised 50Hz sinusoidal signal from the recorded signal will then give you a signal containing just the bad quality stuff. |
#17
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 18:31:03 +0100, Steve wrote:
the range of human hearing is 20Hz to 20 KHz and many sound cards support LFE (Low frequency extensions) Low Frequency Effects, the bangs and thumps. Don't think it goes any lower than the other five channels that are full bandwidth. The LFE has an uuper frequency limit around a few hundred Hz. Just means you have signal to augment the existing LF in the main channels by giving it a bit of welly into decent sub-woofers. But any sound card ought to cope with 50 Hz no problem. -- Cheers Dave. |
#18
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 18:26:52 +0100, MrWeld MrWeld wrote:
A really DIY approach would be to feed the output of mains transformer, possibly via a potentiometer, into the audio line-in socket of a PC. A wall-wart with an AC output (rare, but they do exist) would probably satisfy most safety concerns. You could record the waveform with audio software of your choice, presumably at a fairly low sampling rate. I'm not sure whether a typical integrated soundcard can go as low as 50Hz though. That's an interesting thought. Mains transformers are easy enough to find, or as you say an AC PSU. Maybe I can use a low-end CPU device instead of a PC to keep it low-power: the raspberry pi doesn't have audio in, but the pandaboard es does. If I've got time I might give that a go. Maybe there are cheap ADCs with USB or serial outputs I could use. This is getting interesting. Thanks for the idea. |
#19
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On 19/08/13 19:56, Caecilius wrote:
On Mon, 19 Aug 2013 18:26:52 +0100, MrWeld MrWeld wrote: A really DIY approach would be to feed the output of mains transformer, possibly via a potentiometer, into the audio line-in socket of a PC. A wall-wart with an AC output (rare, but they do exist) would probably satisfy most safety concerns. You could record the waveform with audio software of your choice, presumably at a fairly low sampling rate. I'm not sure whether a typical integrated soundcard can go as low as 50Hz though. That's an interesting thought. Mains transformers are easy enough to find, or as you say an AC PSU. Maybe I can use a low-end CPU device instead of a PC to keep it low-power: the raspberry pi doesn't have audio in, but the pandaboard es does. If I've got time I might give that a go. Maybe there are cheap ADCs with USB or serial outputs I could use. This is getting interesting. Thanks for the idea. Arduino has ADC at fairly low quality (8 bit I think) -- Ineptocracy (in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers. |
#20
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 23:34:46 +0100, The Natural Philosopher
wrote: Maybe there are cheap ADCs with USB or serial outputs I could use. This is getting interesting. Thanks for the idea. Arduino has ADC at fairly low quality (8 bit I think) Yes, that looks possible. Arduino nano has a 10-bit ADC with a sample time of 100us. More than enough for this task I think. The only poblen I can see is that the arduino doesn't have much storage so it would need to log to something else. |
#21
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Tue, 20 Aug 2013 08:28:15 +0100, Caecilius wrote:
On Mon, 19 Aug 2013 23:34:46 +0100, The Natural Philosopher wrote: Maybe there are cheap ADCs with USB or serial outputs I could use. This is getting interesting. Thanks for the idea. Arduino has ADC at fairly low quality (8 bit I think) Yes, that looks possible. Arduino nano has a 10-bit ADC with a sample time of 100us. More than enough for this task I think. The only poblen I can see is that the arduino doesn't have much storage so it would need to log to something else. SD card. Libraries to do this are readily available. -- |
#22
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Mon, 19 Aug 2013 18:26:52 +0100, MrWeld wrote:
On 19/08/2013 12:19, Caecilius wrote: I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. A really DIY approach would be to feed the output of mains transformer, possibly via a potentiometer, into the audio line-in socket of a PC. A wall-wart with an AC output (rare, but they do exist) would probably satisfy most safety concerns. You could record the waveform with audio software of your choice, presumably at a fairly low sampling rate. I'm not sure whether a typical integrated soundcard can go as low as 50Hz though. I'm not sure how well very fast transient spikes would pass through a mains transformer with its large number of turns and magnetic properties that obviously favour mains frequency. A divider that consists of resistors only would provide an accurate view of the situation, but safety and isolation could then be a problem. |
#23
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
"steve" wrote in message ... On Mon, 19 Aug 2013 18:26:52 +0100, MrWeld wrote: On 19/08/2013 12:19, Caecilius wrote: I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. A really DIY approach would be to feed the output of mains transformer, possibly via a potentiometer, into the audio line-in socket of a PC. A wall-wart with an AC output (rare, but they do exist) would probably satisfy most safety concerns. You could record the waveform with audio software of your choice, presumably at a fairly low sampling rate. I'm not sure whether a typical integrated soundcard can go as low as 50Hz though. I'm not sure how well very fast transient spikes would pass through a mains transformer with its large number of turns and magnetic properties that obviously favour mains frequency. A divider that consists of resistors only would provide an accurate view of the situation, but safety and isolation could then be a problem. Two X rated caps in series ahead of the resistive divider ? Arfa |
#24
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
Caecilius wrote:
I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. http://www.ebay.com.au/itm/Hantek-36...item35ca03acc3 |
#25
Posted to uk.d-i-y
|
|||
|
|||
Mains quality monitoring
On Monday, 19 August 2013 12:19:14 UTC+1, Caecilius wrote:
I've got an office with some servers on a UPS. From time to time, the UPS is reporting issues with the mains power quality and switching to battery. It then typically switches back soon after, but sometimes the RCBO for that circuit trips at the same time. I'm looking for something that can monitor the power quality, so I can try to isolate the problem. Does anyone know of monitoring equipment that can monitor the quality of mains power over a period of time? I guess something that just measured voltage would be a start. I've got a multimeter, but it only shows the instant reading and can't record data. And these events only occur once a week or so, and seem to be random. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Monitoring well pump OT? | Metalworking | |||
The Government Is Monitoring... | Electronic Schematics | |||
Monitoring Water Quality | Home Repair | |||
Temperature monitoring | Electronics Repair | |||
monitoring led indicator | Electronics |