Gap between floor tiles and wall
 

Hi,

I have a room which has percelain tiles on the floor with water based underfloor heating in the slab below. The tiler laid the floor with a gap of a few mm from the walls as the original plan was to put skirting around.

The walls have all been replastered and we are now considering having no skirting and effectively sealing the gap left by the tiler.

I have a few questions...
1. is the gap needed for expansion reasons? I wouldn't have thought porcelain would expand since the joints between the tiles would presumably crack if it did but thought I would check...
2. What would you fill it with? I was thinking of using the same grout as the rest of the floor - would this work? If the gap is required for expansion, could I use cauk/ mastic or something else?

Any help gratefully appreciated.

thanks

Lee.

Gap between floor tiles and wall
 

On 13/06/13 13:17, Lee Nowell wrote:
Hi,

I have a room which has percelain tiles on the floor with water based underfloor heating in the slab below. The tiler laid the floor with a gap of a few mm from the walls as the original plan was to put skirting around.

The walls have all been replastered and we are now considering having no skirting and effectively sealing the gap left by the tiler.

I have a few questions...
1. is the gap needed for expansion reasons? I wouldn't have thought porcelain would expand since the joints between the tiles would presumably crack if it did but thought I would check...

slightly. I would be inclineed to use a flexible mastic.

2. What would you fill it with? I was thinking of using the same grout as the rest of the floor - would this work? If the gap is required for expansion, could I use cauk/ mastic or something else?
I did this and it has hairline crack. I had silicone underneath
expecting that. But my walls are plasterboard over stud, so 'move' a
little. If yours are blockwork you should be safe


What *I* wanted to do but never got around to was to seal the tile to
wall with silicone and then put a tile skirting up.

Any help gratefully appreciated.

thanks

Lee.


--
Ineptocracy

(in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.

Gap between floor tiles and wall
 

On Thursday 13 June 2013 13:17 Lee Nowell wrote in uk.d-i-y:

Hi,

I have a room which has percelain tiles on the floor with water based
underfloor heating in the slab below. The tiler laid the floor with a gap
of a few mm from the walls as the original plan was to put skirting
around.

The walls have all been replastered and we are now considering having no
skirting and effectively sealing the gap left by the tiler.

I have a few questions...
1. is the gap needed for expansion reasons? I wouldn't have thought
porcelain would expand since the joints between the tiles would presumably
crack if it did but thought I would check...
2. What would you fill it with? I was thinking of using the same grout as
the rest of the floor - would this work? If the gap is required for
expansion, could I use cauk/ mastic or something else?

Any help gratefully appreciated.

Fill it with a bead of silicone or MS Polymer sealant. The former certainly
is available in lots of colours to blend in (eg match the groute of either
the wall or floor tiles).


--
Tim Watts Personal Blog: http://squiddy.blog.dionic.net/

http://www.sensorly.com/ Crowd mapping of 2G/3G/4G mobile signal coverage

Reading this on the web? See:
http://wiki.diyfaq.org.uk/index.php?title=Usenet

Gap between floor tiles and wall
 

Thanks for your reply. Did you use mastic or grout to fill the gap?

Ideally I would use the same grout so I can match the colour. I guess the worse case scenario would be that the grout would crack? I assume it wouldn't break/ damage the tiles themselves?

thanks

Lee.

Gap between floor tiles and wall
 

Thanks for your reply. Did you use mastic or grout to fill the gap?

Ideally I would use the same grout so I can match the colour. I guess the worse case scenario would be that the grout would crack? I assume it wouldn't break/ damage the tiles themselves?

thanks

Lee.