UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 5
Default Baxi HE 80 plus intermittent CH timing problem

Hi,

I have a Baxi 80 HE plus which firstly works fine for the hot water system.

However for the central heating several times a week, the Central
heating does not come on as per timer controls. Although the lights on
the timer control light up as expected when the timer is set to swich
the heating on, the boiler does not fire.

However with several goes at switching the timer control on and off e.g.
clicking advance or boost and pressing the reset button on the boiler ,
the Central heating will eventually fire up ( 2 green lights) and stay
on until the timer control switches it off later in the evening.

There are no red fault lights showing on the boiler when it doesn't
fire- in fact when it doesn't fire up there are no green lights either
showing on the boiler.

The pressurised system is just over 1 bar.

Any ideas if this is more likely to be a timing control (Drayton Tempus
7) which I could easily get replaced or a boiler problem ( lots of money)!

Thanks for any help

Chris


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Baxi Barcelona - Intermittent Ignition Lockout Peter Hemmings UK diy 22 September 9th 15 12:11 PM
Intermittent hot water from Baxi Combi 130 HE Richard Amer UK diy 4 December 29th 07 09:12 PM
Washing machine problem: timing switch or motor? BE Electronics Repair 22 July 2nd 07 09:31 PM
Baxi Solo 2 RS intermittent Problem [email protected] UK diy 4 February 24th 06 09:07 PM
Pinball switch closure timing problem frenchy Electronics Repair 4 March 24th 05 06:46 PM


All times are GMT +1. The time now is 04:10 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"