|
antislip cover for a manhole cover
I've got a metal manhole cover on my front path, and it is slippery when
wet. I've looked at the antislip tape from toolstation at £4 - but does it stick on such a surface or is there a better way of making it antislip? Did wonder whether to paint it with gloss paint and sprinkle sand on the wet paint! -- Mark BR |
antislip cover for a manhole cover
On 18/10/2012 15:44, Mark BR wrote:
I've got a metal manhole cover on my front path, and it is slippery when wet. I've looked at the antislip tape from toolstation at £4 - but does it stick on such a surface or is there a better way of making it antislip? Whether a tape will stick will depend a lot on the quality of the surface it is going to be stuck to. I would expect that a conformable tape would work best on something like a manhole cover. Did wonder whether to paint it with gloss paint and sprinkle sand on the wet paint! Probably better than nothing, but there are plenty of purpose made non-slip paints available. Colin Bignell |
antislip cover for a manhole cover
"Nightjar" wrote in message ... On 18/10/2012 15:44, Mark BR wrote: I've got a metal manhole cover on my front path, and it is slippery when wet. I've looked at the antislip tape from toolstation at £4 - but does it stick on such a surface or is there a better way of making it antislip? Whether a tape will stick will depend a lot on the quality of the surface it is going to be stuck to. I would expect that a conformable tape would work best on something like a manhole cover. Did wonder whether to paint it with gloss paint and sprinkle sand on the wet paint! Probably better than nothing, but there are plenty of purpose made non-slip paints available. I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! -- Mark BR |
antislip cover for a manhole cover
On 18/10/2012 17:56, Mark BR wrote:
"Nightjar" wrote in message ... On 18/10/2012 15:44, Mark BR wrote: I've got a metal manhole cover on my front path, and it is slippery when wet. I've looked at the antislip tape from toolstation at £4 - but does it stick on such a surface or is there a better way of making it antislip? Whether a tape will stick will depend a lot on the quality of the surface it is going to be stuck to. I would expect that a conformable tape would work best on something like a manhole cover. Did wonder whether to paint it with gloss paint and sprinkle sand on the wet paint! Probably better than nothing, but there are plenty of purpose made non-slip paints available. I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! I've seen it quite a lot cheaper than that and International Paints do a pack of non-slip additive for about £5. Otherwise, if you want to make your own, I would suggest using coarse carborundum powder rather than sand. Colin Bignell |
antislip cover for a manhole cover
Mark BR wrote:
I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! Non slip paints are really meant for indoor use, and they aren't very good when used outdoors, I've found. One option is to use ribbed rubber flooring material. I have in the past used this outdoors successfully by first painting the area with thick gloss and liberally spreading sand on it, to give the underside of the rubber something to grip to. What you have to do is cover the paint completely with a layer of sand (don't just sprinkle it) then put a board over it and walk about on the board. The wait til it's dry, then brush off the excess. Then hose it after a day or two so there's absolutely no loose grains. The rubber mat can have ordinary aluminium carpet edging strip around the perimeter. This will grip the rubber firmly. Fasten the strip down with self tappers. An alternative to the sandy paint is Evode impact adhesive, but an £8 tin will only barely do 2 sq ft. Whatever way you fasten the rubber, warm it first because otherwise on a hot day it will form ridges. It needs to be under v slight tension. Bill |
antislip cover for a manhole cover
On 18/10/2012 20:01, Bill Wright wrote:
Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! Non slip paints are really meant for indoor use, and they aren't very good when used outdoors, I suspect that International Paints would disagree with you. They make non-slip deck paints for ships working in Arctic conditions. Colin Bignell |
antislip cover for a manhole cover
"Andy Dingley" wrote in message ... On Thursday, 18 October 2012 15:49:16 UTC+1, Mark BR wrote: Did wonder whether to paint it with gloss paint and sprinkle sand on the wet paint! Black tar paint (bitumen primer, cheap and very useful), then sprinkle dry sand through a coarse sieve or colander. When at school, we did the paving slabs around the outdoor pool with sand and paint, we mixed the sand with some of the paint and applied it, then once it was dry, put a top coat to seal in any bits of sand that had become exposed and thus would probably get washed out over time. It did the job just fine so i guess for the manhole it'll be ideal, and the cheapest method, |
antislip cover for a manhole cover
On 18/10/2012 21:58, Nightjar wrote:
On 18/10/2012 20:01, Bill Wright wrote: Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! Non slip paints are really meant for indoor use, and they aren't very good when used outdoors, I suspect that International Paints would disagree with you. They make non-slip deck paints for ships working in Arctic conditions. Colin Bignell But decks of ships in the Arctic tend not to accumulate algae growing on retained organic and other material - which is what can happen in ordinary gardens. -- Rod |
antislip cover for a manhole cover
On 18/10/2012 22:01, polygonum wrote:
On 18/10/2012 21:58, Nightjar wrote: On 18/10/2012 20:01, Bill Wright wrote: Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! Non slip paints are really meant for indoor use, and they aren't very good when used outdoors, I suspect that International Paints would disagree with you. They make non-slip deck paints for ships working in Arctic conditions. Colin Bignell But decks of ships in the Arctic tend not to accumulate algae growing on retained organic and other material - which is what can happen in ordinary gardens. No, they tend to accumulate frozen sea spray. Colin Bignell |
antislip cover for a manhole cover
polygonum wrote:
On 18/10/2012 21:58, Nightjar wrote: On 18/10/2012 20:01, Bill Wright wrote: Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! Non slip paints are really meant for indoor use, and they aren't very good when used outdoors, I suspect that International Paints would disagree with you. They make non-slip deck paints for ships working in Arctic conditions. Colin Bignell But decks of ships in the Arctic tend not to accumulate algae growing on retained organic and other material - which is what can happen in ordinary gardens. You've never seen a canal boat deck, then. They use the same International Paints anti-slip products. They're expensive, but good. They need hosing off fairly regularly, but that's all, and I'd expect to do the same to manhole covers in a path. -- Tciao for Now! John. |
antislip cover for a manhole cover
On 18/10/2012 22:32, John Williamson wrote:
polygonum wrote: On 18/10/2012 21:58, Nightjar wrote: On 18/10/2012 20:01, Bill Wright wrote: Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! Non slip paints are really meant for indoor use, and they aren't very good when used outdoors, I suspect that International Paints would disagree with you. They make non-slip deck paints for ships working in Arctic conditions. Colin Bignell But decks of ships in the Arctic tend not to accumulate algae growing on retained organic and other material - which is what can happen in ordinary gardens. You've never seen a canal boat deck, then. They use the same International Paints anti-slip products. They're expensive, but good. They need hosing off fairly regularly, but that's all, and I'd expect to do the same to manhole covers in a path. It was exactly that which prompted my post! Saw someone painting afresh with an ordinary paint, someone else with a newly non-slip painted deck area and that looked fine, and a few which were very algae-covered and at least looked slippery. Maybe it was because they were moored under trees? And no-one had done the hosing off in a while. -- Rod |
antislip cover for a manhole cover
"Bill Wright" wrote in message ... Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! --SNIP-- An alternative to the sandy paint is Evode impact adhesive, but an £8 tin will only barely do 2 sq ft. Whatever way you fasten the rubber, warm it first because otherwise on a hot day it will form ridges. It needs to be under v slight tension. Adhesive, that made me think, always a bad idea. What would sand and PVA do? Got some in the garage so can always experiment with that. -- Mark BR |
antislip cover for a manhole cover
"Mark BR" wrote in message o.uk... "Bill Wright" wrote in message ... Mark BR wrote: I looked at the non-slip paint, but it is about £28 for enough to cover some 200 sq m. I only want a cover 2' by 1' protected! --SNIP-- An alternative to the sandy paint is Evode impact adhesive, but an £8 tin will only barely do 2 sq ft. Whatever way you fasten the rubber, warm it first because otherwise on a hot day it will form ridges. It needs to be under v slight tension. Adhesive, that made me think, always a bad idea. What would sand and PVA do? Got some in the garage so can always experiment with that. I was just going to suggest that. Its cheap and easily renewable. Paint on the PVA and sprinkle with sand before it dries. |
antislip cover for a manhole cover
On Thursday, 18 October 2012 15:49:16 UTC+1, Mark BR wrote:
I've got a metal manhole cover on my front path, and it is slippery when wet. I've looked at the antislip tape from toolstation at £4 - but does it stick on such a surface or is there a better way of making it antislip? Did wonder whether to paint it with gloss paint and sprinkle sand on the wet paint! -- Mark BR Hello, One option is to look at the anti slip slip at www.heskins.com, they are a company specialising in anti slip coatings, they have done work on anti slip manhole covers. Regards, L |
antislip cover for a manhole cover
On Tue, 06 Jan 2015 18:12:38 +0000, Lobster wrote:
On 06 Jan 2015, grunted: One option is to look at the anti slip slip at www.heskins.com, they are a company specialising in anti slip coatings, they have done work on anti slip manhole covers. Another, preferable option is for you to think up better ways of flogging your tat than posting to this newsgroup, YOU SPAMMING ****! https://www.linkedin.com/pub/larry-longton/20/802/657 Some people really do defy belief, don't they? Still, since Lawrence David Longton 100% owns the company, there's no point in complaining to his boss. They do say that family firms tend to go one way or the other in the second generation. |
antislip cover for a manhole cover
On 06/01/2015 18:43, Adrian wrote:
Still, since Lawrence David Longton 100% owns the company, there's no point in complaining to his boss. They do say that family firms tend to go one way or the other in the second generation. Must be getting desperate if covering one manhole cover is worth the effort. Andy |
| All times are GMT +1. The time now is 05:01 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter