Slope on bath drain pipe.
I plan to install a new upstairs bathroom toilet, basin and bath. All
three items will be on the same exterior wall. The basin is between the bath and the toilet. If I connect the bath drain to the toilet soil drain pipe, outside just below the bath, a distance of about 8 foot, how much slope do I need? Is it OK to connect the basin drain to the middle of the above pipe or should I have a separate connection to the soil pipe? The latter option would certainly prevent any water from the basin trying to enter the bath. -- Michael Chare |
Slope on bath drain pipe.
On 01/10/2012 18:17, Michael Chare wrote:
I plan to install a new upstairs bathroom toilet, basin and bath. All three items will be on the same exterior wall. The basin is between the bath and the toilet. If I connect the bath drain to the toilet soil drain pipe, outside just below the bath, a distance of about 8 foot, how much slope do I need? Is it OK to connect the basin drain to the middle of the above pipe or should I have a separate connection to the soil pipe? The latter option would certainly prevent any water from the basin trying to enter the bath. This has chapter and verse on all these subjects: http://www.planningportal.gov.uk/bui...parth/approved -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Slope on bath drain pipe.
On 01/10/2012 18:17, Michael Chare wrote:
I plan to install a new upstairs bathroom toilet, basin and bath. All three items will be on the same exterior wall. The basin is between the bath and the toilet. If I connect the bath drain to the toilet soil drain pipe, outside just below the bath, a distance of about 8 foot, how much slope do I need? Is it OK to connect the basin drain to the middle of the above pipe or should I have a separate connection to the soil pipe? The latter option would certainly prevent any water from the basin trying to enter the bath. If feasible, I would have separate connections to the soil pipe. I didn't and, whilst there is no real problem, I would not do so again. I feel it was a bit sloppy. -- Rod |
Slope on bath drain pipe.
Michael Chare wrote:
I plan to install a new upstairs bathroom toilet, basin and bath. All three items will be on the same exterior wall. The basin is between the bath and the toilet. If I connect the bath drain to the toilet soil drain pipe, outside just below the bath, a distance of about 8 foot, how much slope do I need? Is it OK to connect the basin drain to the middle of the above pipe or should I have a separate connection to the soil pipe? The latter option would certainly prevent any water from the basin trying to enter the bath. at least 1:100 1:60 is better, and more is OK but watch out for TOO big a flow actually sucking the U bend an trap dry. Or add an air admittance valve to it If you can guarantee that only water is going down it and not solids that might collect it needs no slope at all. It can even go up - its just another U bend then :-) -- Ineptocracy (in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers. |
Slope on bath drain pipe.
On Oct 1, 6:16*pm, Michael Chare mUNDERSCOREnews@chareDOTorgDOTuk
wrote: I plan to install a new upstairs bathroom toilet, basin and bath. All three items will be on the same exterior wall. The basin is between the bath and the toilet. If I connect the bath drain to the toilet soil drain pipe, outside just below the bath, *a distance of about 8 foot, how much slope do I need? Is it OK to connect the basin drain to the middle of the above pipe or should I have a separate connection to the soil pipe? The latter option would certainly prevent any water from the basin trying to enter the bath.. -- Michael Chare The optimum slope is 1:30. but not critical for wash basins. (Steeper rather than shallower) Separate connections are better. There's less chance of one trap "sucking the other out" Be sure to install cleaning points in the pipework so you can clear out any future blockages. Or use some compression fittings that can be parted for this purpose. |
Slope on bath drain pipe.
On 01/10/2012 23:56, The Natural Philosopher wrote:
If you can guarantee that only water is going down it and not solids that might collect it needs no slope at all. It can even go up - its just another U bend then :-) Yes, but you can't! Bits of human hair inevitably get into bath and basin water - and these will collect at low points, and ultimately cause blockages. It's important to make sure that any long straight pipe has a downwards slope along its whole length, and doesn't have any dips in the middle. -- Cheers, Roger ____________ Please reply to Newsgroup. Whilst email address is valid, it is seldom checked. |
Slope on bath drain pipe.
On 02/10/2012 07:01, harry wrote:
Be sure to install cleaning points in the pipework so you can clear out any future blockages. Or use some compression fittings that can be parted for this purpose. That is an idea I had not thought of! Thanks for all the replies. -- Michael Chare |
All times are GMT +1. The time now is 08:04 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter