Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#41
Posted to uk.d-i-y
|
|||
|
|||
SPAM Any ideas for putting a washing machine motor to good use?
wrote in message ... On Monday, June 30, 2014 1:11:34 AM UTC+1, wrote: On Sunday, August 26, 2012 4:30:52 PM UTC+1, Roger Mills wrote: Having recently scrapped my 30-year-old Zanussi washing machine, I stripped it for potentially re-usable parts. The part with the greatest potential is the motor, but I've no idea what to use it for! It's a hefty beast, with a centrifugal clutch inside its pulley. It had no fewer than eight wires connected to it - presumably for selecting the various speeds, and for going into reverse when agitating the washing. The label on the motor says the following: ZEM 20571033 CEI107/10-IEC 335 4A 260W 2780 RPM 3A 180W 1380 RPM 8/10uF 400VL [1] 1.1A 95W 900 RPM 8/10uF 450VL Googling for the model number doesn't produce anything useful. I'm looking for innovative suggestions of possible uses for this beast. Why not use the motor to power a project? Yes, such as? an anal probe for curing spammers? See website idiotenterprises. The metal shell also makes a good tool cupboard. I cant think of a way to turn it into a good tool cupboard. Its not rigid enough for much, and an inconvenient size. As spam goes this is pathetic. Maybe you just gut the machine, leaving the door on the front, then chuck things you hardly use through the door into the empty 'cabinet' Or maybe turn it into a novelty cat bed |
#42
Posted to uk.d-i-y
|
|||
|
|||
Any ideas for putting a washing machine motor to good use?
"Brian Gaff" wrote in message ... Yeess, often these things are so bespoke it is really pointless trying to re utilise them. I heard a good one the other day, apparently thedisc rotaion motors of cd and DVD drives are being used by aero modellers for driving the props round after suitable moods and a new driver circuit. Good luck and I hope they don't fly apart on them lithium batteries they seem to use nowadays. We've been using CD motors on aircraft for the last decade or so, they were the first cheap way to get a brushless motor in the hobby, Nowadays you can buy ready made very powerfull brushless motors for peanuts it's hardly worth the bother, tho they do get sold with kits where you re-wind the motor to get a rev range and power suitable for a larger prop. The li-po batteries going up in a ball of flames is a good special effect for war birds, that's if you are re-creating being shot down and crashing I've been using li-po batteries for about 10 years now, treat them with respect and they are fine, and they are the biggest advance in model flight for a long time, so much power in such a light weight package... to think when i first got an electric model plane, it could hardly get off the ground due to the weight of the ni-cads, flew 4 minutes then the batteries were dead, Nowadays i fly for half an hour on a li-po pack, and have to use lead weights to adjust the COG, as the pack isn't heavy enough like the old ni-cad packs were. |
#43
Posted to uk.d-i-y
|
|||
|
|||
Any ideas for putting a washing machine motor to good use?
In article ,
"Brian Gaff" writes: Yeess, often these things are so bespoke it is really pointless trying to re utilise them. For an older machine, they are just universal mains motors with separate field and armature connections for reversing, and someones an extra field winding for the extra power on top spin speed. Some have a tachometer to feed back the speed if the machine is controlled by a microcontroller. *However*, these are always run with speed or power controllers, and a load attached. If you try and spin one up without any speed control and without a load, some will spin fast enough for the armature to fly into pieces (rather explosively), so you should never do that. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
#44
Posted to uk.d-i-y
|
|||
|
|||
Any ideas for putting a washing machine motor to good use?
In article ,
"Brian Gaff" writes: Yeess, often these things are so bespoke it is really pointless trying to re utilise them. *However*, these are always run with speed or power controllers, and a load attached. If you try and spin one up without any speed control and without a load, some will spin fast enough for the armature to fly into pieces (rather explosively), so you should never do that. Not to self. When washing machine dies try (from safe distance) running motor up. Mike |
#45
Posted to uk.d-i-y
|
|||
|
|||
Any ideas for putting a washing machine motor to good use?
On 30/06/14 15:47, Andrew Gabriel wrote:
*However*, these are always run with speed or power controllers, and a load attached. If you try and spin one up without any speed control and without a load, some will spin fast enough for the armature to fly into pieces (rather explosively), so you should never do that. Rubbish -- Ineptocracy (in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Putting a washing machine in the bathroom (under the sink!) | UK diy | |||
Ariston washing machine very noisy, ideas? | UK diy | |||
Washing machine sticks with water flushing through - ideas? | UK diy | |||
washing machine motor | Electronics Repair | |||
Washing machine motor | Metalworking |