gutter joint
What do you do about gutter joints when a wall isn't straight? In other
words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... |
gutter joint
What do you do about gutter joints when a wall isn't straight? In
other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... I really, really wonder if the wotsits rotting my wotsit as sometimes I can barely remember yesterday but I recalled your question was asked before. Google then did the rest: https://groups.google.com/forum/?hl=en&fromgroups#!topic/uk.d-i-y/pHx2L97sH7s Subject of course to Andrew Mawson or others providing an update. -- Robin reply to address is (meant to be) valid |
gutter joint
stuart noble wrote:
What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... An external corner you mean? Put a stop end on each piece, which may mean you need another outlet. |
gutter joint
On 19/07/2012 14:47, Robin wrote:
What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... I really, really wonder if the wotsits rotting my wotsit as sometimes I can barely remember yesterday but I recalled your question was asked before. Google then did the rest: https://groups.google.com/forum/?hl=en&fromgroups#!topic/uk.d-i-y/pHx2L97sH7s Subject of course to Andrew Mawson or others providing an update. Christ!! I'd forgotten all about that. I really am worried that the grey stuff is disintegrating at a rate of knots. Quite a useful thread in retrospect. Thanks for reminding me. Hangs head in shame :-( |
gutter joint
On 19/07/2012 16:17, Phil L wrote:
stuart noble wrote: What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... An external corner you mean? Put a stop end on each piece, which may mean you need another outlet. No, as Andrew Mawson explained, "wall has a 10 degree kink due to property line" |
gutter joint
stuart noble wrote:
On 19/07/2012 16:17, Phil L wrote: stuart noble wrote: What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... An external corner you mean? Put a stop end on each piece, which may mean you need another outlet. No, as Andrew Mawson explained, "wall has a 10 degree kink due to property line" You can bend it that much in a normal straight joint, and if not, put a stop end on each piece at the point it kinks, as I said it may mean you need another outlet. |
gutter joint
stuart noble wrote:
On 19/07/2012 16:17, Phil L wrote: stuart noble wrote: What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... An external corner you mean? Put a stop end on each piece, which may mean you need another outlet. No, as Andrew Mawson explained, "wall has a 10 degree kink due to property line" what you do with PVC gutter is cut two lengths and glue them together with PVC cement. You can hack a bit off a coupler to cover and strengthen the joint. -- To people who know nothing, anything is possible. To people who know too much, it is a sad fact that they know how little is really possible - and how hard it is to achieve it. |
gutter joint
On 19/07/2012 16:44, The Natural Philosopher wrote:
stuart noble wrote: On 19/07/2012 16:17, Phil L wrote: stuart noble wrote: What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... An external corner you mean? Put a stop end on each piece, which may mean you need another outlet. No, as Andrew Mawson explained, "wall has a 10 degree kink due to property line" what you do with PVC gutter is cut two lengths and glue them together with PVC cement. You can hack a bit off a coupler to cover and strengthen the joint. That's a good idea. Whether a gutter man would be that resourceful I'm not sure. No way am I going up that high from a narrow base |
gutter joint
"Robin" wrote in message ... What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... I really, really wonder if the wotsits rotting my wotsit as sometimes I can barely remember yesterday but I recalled your question was asked before. Google then did the rest: https://groups.google.com/forum/?hl=en&fromgroups#!topic/uk.d-i-y/pHx2L97sH7s Subject of course to Andrew Mawson or others providing an update. -- Robin reply to address is (meant to be) valid There are adjustable bends, I used one years ago. |
gutter joint
On 19/07/2012 10:41, stuart noble wrote:
What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... This any good? http://www.screwfix.com/p/adjustable...le-112mm/66665 -- Dave - The Medway Handyman www.medwayhandyman.co.uk |
gutter joint
On 19/07/2012 18:25, The Medway Handyman wrote:
On 19/07/2012 10:41, stuart noble wrote: What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... This any good? http://www.screwfix.com/p/adjustable...le-112mm/66665 Cheers for that. I haven't measured the angle exactly but I don't think 156 would be enough. This is more like 170 degs. |
gutter joint
stuart noble wrote:
On 19/07/2012 16:44, The Natural Philosopher wrote: stuart noble wrote: On 19/07/2012 16:17, Phil L wrote: stuart noble wrote: What do you do about gutter joints when a wall isn't straight? In other words it consists of 2 sections joined at an angle of 170 degs instead of 180. Unless there's some kind of adjustable straight joint, one would appear to be buggered.... An external corner you mean? Put a stop end on each piece, which may mean you need another outlet. No, as Andrew Mawson explained, "wall has a 10 degree kink due to property line" what you do with PVC gutter is cut two lengths and glue them together with PVC cement. You can hack a bit off a coupler to cover and strengthen the joint. That's a good idea. Whether a gutter man would be that resourceful I'm not sure. No way am I going up that high from a narrow base get a tower. Makes it all a lot less scary -- To people who know nothing, anything is possible. To people who know too much, it is a sad fact that they know how little is really possible - and how hard it is to achieve it. |
gutter joint
stuart noble wrote:
https://groups.google.com/forum/?hl=...!topic/uk.d-i- y/pHx2L97sH7s Subject of course to Andrew Mawson or others providing an update. Christ!! I'd forgotten all about that. I really am worried that the grey stuff is disintegrating at a rate of knots. Quite a useful thread in retrospect. Thanks for reminding me. Hangs head in shame :-( And 8 years on from the post above and 18 years in total Its still ok and not leaking. - |
All times are GMT +1. The time now is 02:54 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter