What type of adhesive for fibreglass treads on concrete steps ?
The treads are about 700mm X 25mm
The steps are outside our back door. Adhesive must be fairly thick (not runny) and must not go off too quickly. |
What type of adhesive for fibreglass treads on concrete steps?
Jim Hawkins wrote:
The treads are about 700mm X 25mm The steps are outside our back door. Adhesive must be fairly thick (not runny) and must not go off too quickly. car body filler or epoxy mortar -- To people who know nothing, anything is possible. To people who know too much, it is a sad fact that they know how little is really possible - and how hard it is to achieve it. |
What type of adhesive for fibreglass treads on concrete steps ?
In article , Jim Hawkins
writes The treads are about 700mm X 25mm The steps are outside our back door. Adhesive must be fairly thick (not runny) and must not go off too quickly. I'd suggest some sort of waterproof 'sticks like ****' product applied in the traditional squiggle fashion but with a fine bead front, back and sides (as a bed) to keep the water out. My fave at the mo is Plumbers' Gold which is an adhesive and sealant that will bond to damp masonry if reqd. The slight flexibility should help too: http://www.toolstation.com/shop/p61679 Do mask off the surrounds as it will stick to anything and will likely squeeze out when you bed the step. -- fred it's a ba-na-na . . . . |
All times are GMT +1. The time now is 06:50 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter