Best Mirror Adhesive?
 

Could someone let me know what would be the best mirror adhesive for:

1. A 174 cm x 81cm acyrlic mirror (3mm) to be attached vertically to a plastic/perspects board in the garden; and

2. A 150cm x 90cm (6mm) normal glass mirror with silver backing to be attached vertically to vaults in a basement.

For a variety of reasons, neither of these can be drilled.

Many thanks for your advice and tips on both product and approach!

Havego:)

Best Mirror Adhesive?
 

In article ,
Huge writes:
On 2012-04-26, Haveago wrote:

Could someone let me know what would be the best mirror adhesive for:

1. A 174 cm x 81cm acyrlic mirror (3mm) to be attached vertically to a
plastic/perspects board in the garden; and

2. A 150cm x 90cm (6mm) normal glass mirror with silver backing to be
attached vertically to vaults in a basement.

For a variety of reasons, neither of these can be drilled.

Many thanks for your advice and tips on both product and approach!

The mirror in my garage is stuck on with silicone mastic (likely
Wickes own). I want to move it, but cannot get it off the wall...

Depending on the quality of the back of the mirror, the acetic
acid given off during curing of silicone can wreck the silvering.
There is a special mirror equivalent which does not risk damaging
the mirror silver. A glass shop will have it, but I think I've
also seen it in one of the sheds.

Assume you won't ever get the mirror off without wrecking it.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

Best Mirror Adhesive?
 

On 26 Apr 2012 16:45:40 GMT, Huge wrote:



Oh, it was only the horrid one from when we redecorated the downstairs
loo, and it's in the garage because that's where I trim my beard. I
assumed it won't come off without breaking ...

Tried a hedge lopper ?

DerekG

Best Mirror Adhesive?
 

On 26/04/2012 17:44, Andrew Gabriel wrote:

Depending on the quality of the back of the mirror, the acetic
acid given off during curing of silicone can wreck the silvering.
There is a special mirror equivalent which does not risk damaging
the mirror silver. A glass shop will have it, but I think I've
also seen it in one of the sheds.

There are actually different sorts of mirror adhesive, as I found out
not long ago. Both come in cartridges; one sort is similar to silicone,
and you apply thick parallel beads of the stuff all down the back of the
miror; when you apply it to the wall it needs the weight supporting for
a good while till it cures (I use a batten screwed to the wall) and you
need to take care that there's a decent thickness of adhesive twixt
mirror and wall (I use spacers behind the mirror to ensure this), and
that there's free flow of air to all the adhesive so it all goes off OK
(ie a big spiral or concentric circular beads are not good).

The othet type is an impact adhesive; you spread a thin film on both
wall and mirror, wait 5-10 mins and apply the mirror to the wall; and
that's it, stuck. No support needed.

I prefer the former type myself as my walls are rarely (never)
billiard-table-flat, so I'm more confident that the adhesive is actually
doing its job!

David

Best Mirror Adhesive?
 

In article ,
Lobster writes:
On 26/04/2012 17:44, Andrew Gabriel wrote:

Depending on the quality of the back of the mirror, the acetic
acid given off during curing of silicone can wreck the silvering.
There is a special mirror equivalent which does not risk damaging
the mirror silver. A glass shop will have it, but I think I've
also seen it in one of the sheds.

There are actually different sorts of mirror adhesive, as I found out
not long ago. Both come in cartridges; one sort is similar to silicone,
and you apply thick parallel beads of the stuff all down the back of the
miror; when you apply it to the wall it needs the weight supporting for
a good while till it cures (I use a batten screwed to the wall) and you
need to take care that there's a decent thickness of adhesive twixt
mirror and wall (I use spacers behind the mirror to ensure this), and
that there's free flow of air to all the adhesive so it all goes off OK
(ie a big spiral or concentric circular beads are not good).

The othet type is an impact adhesive; you spread a thin film on both
wall and mirror, wait 5-10 mins and apply the mirror to the wall; and
that's it, stuck. No support needed.

I prefer the former type myself as my walls are rarely (never)
billiard-table-flat, so I'm more confident that the adhesive is actually
doing its job!

I have used one of the no-more-nails type products, but that was
in a case where the mirror had a plastic backing, so it wasn't
going to be able to react with the silver. It was an IKEA
bathroom cupboard where the door was a mirror glued to a wooden
frame (but not originally glued well enough).

My parents have a full length bathroom mirror which was fixed
to the wall 30-40 years ago with double-sided sticky pads.
I took it down a year or so back whilst some work was done in
the room by gently pulling away so the sticky pads failed, and
then refixed with new sticky pads. The originals came with the
mirror and were presumably chosen not to damage the backing.

Last time I fixed a mirror to a wall, I used the edge fixings
which screw to the wall behind the mirror, with a small metal
bracket to hold the edge of the mirror, the top ones sliding
into place after positioning the mirror on the bottom ones.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

Best Mirror Adhesive?
 

Lobster wrote
Andrew Gabriel wrote

Depending on the quality of the back of the mirror, the acetic
acid given off during curing of silicone can wreck the silvering.
There is a special mirror equivalent which does not risk damaging
the mirror silver. A glass shop will have it, but I think I've
also seen it in one of the sheds.

There are actually different sorts of mirror adhesive, as I found out
not long ago. Both come in cartridges; one sort is similar to silicone,
and you apply thick parallel beads of the stuff all down the back of the
miror; when you apply it to the wall it needs the weight supporting for
a good while till it cures (I use a batten screwed to the wall) and you
need to take care that there's a decent thickness of adhesive twixt
mirror and wall (I use spacers behind the mirror to ensure this), and
that there's free flow of air to all the adhesive so it all goes off OK
(ie a big spiral or concentric circular beads are not good).

The othet type is an impact adhesive; you spread a thin film on both
wall and mirror, wait 5-10 mins and apply the mirror to the wall; and
that's it, stuck. No support needed.

I prefer the former type myself as my walls are rarely (never)
billiard-table-flat, so I'm more confident that the adhesive is actually
doing its job!

Surely it doesn't really matter with what you call impact adhesive ?

All you need is enough areas in contact and you can soon see if
there are enough or not by checking that its stuck on properly.

Best Mirror Adhesive?
 

Haveago wrote:
Could someone let me know what would be the best mirror adhesive for:

1. A 174 cm x 81cm acyrlic mirror (3mm) to be attached vertically to a
plastic/perspects board in the garden; and

2. A 150cm x 90cm (6mm) normal glass mirror with silver backing to be
attached vertically to vaults in a basement.

For a variety of reasons, neither of these can be drilled.

Many thanks for your advice and tips on both product and approach!

Havego:)




go into any decent glaziers and buy - wait for it

MIRROR ADHESIVE.

Its a fairly inert variant on the no more nails theme.


--
To people who know nothing, anything is possible.
To people who know too much, it is a sad fact
that they know how little is really possible -
and how hard it is to achieve it.

Best Mirror Adhesive?
 

On Friday, April 27, 2012 12:27:27 PM UTC+1, The Natural Philosopher wrote:
Haveago wrote:
Could someone let me know what would be the best mirror adhesive for:

go into any decent glaziers and buy - wait for it

MIRROR ADHESIVE.

Its a fairly inert variant on the no more nails theme.

It is usually a neutral cure silicone, but an MS polymer (short for mental short-dwarf polymer) works as well.

Best Mirror Adhesive?
 

Andrew Gabriel wrote:

Depending on the quality of the back of the mirror, the acetic
acid given off during curing of silicone can wreck the silvering.
There is a special mirror equivalent which does not risk damaging
the mirror silver. A glass shop will have it, but I think I've
also seen it in one of the sheds.

I fixed some mirrors to the plastered walls of a bathroom some years ago.
The mirrors were fixed with several spots of silicone and the walls were
then tiled. Before fixing the mirrors I covered the backs with a self
adhesive foil to stop any reaction with the silicone. I bought the mirrors
and foil from a local glazier.

Assume you won't ever get the mirror off without wrecking it.

Yep.

--
Nige Danton - Replace the obvious with g.m.a.i.l