How to "impede" hinges ?
 

The aim is to stop the shutters swinging shut on their own, by stiffening
the action of the hinges, so it normally takes effort to open/close the
shutters.

Any ideas? I think the solution must involve the hinge pins - is there a
"trick" for this?
A squeeze in a vice, but you'd do better to buy indented hinges.

How to "impede" hinges ?
 

I have small shutters fixed on the inside an external door. The shutters are
very lightweight. They open/close very easily on their top and bottom
hinges. When closed, the shutters are held closed by small magnetic catches.
The shutter hinges are about an inch and a half long, with hinge pins.

Sometimes, I would like the shutters to remain open - at 90 degrees to the
door - but they have a tendency to swing shut on their own.

The aim is to stop the shutters swinging shut on their own, by stiffening
the action of the hinges, so it normally takes effort to open/close the
shutters.

Any ideas? I think the solution must involve the hinge pins - is there a
"trick" for this?

How to "impede" hinges ?
 

"For example: John Smith" wrote in message
...

I have small shutters fixed on the inside an external door. The shutters
are
very lightweight. They open/close very easily on their top and bottom
hinges. When closed, the shutters are held closed by small magnetic
catches.
The shutter hinges are about an inch and a half long, with hinge pins.

Sometimes, I would like the shutters to remain open - at 90 degrees to the
door - but they have a tendency to swing shut on their own.

The aim is to stop the shutters swinging shut on their own, by stiffening
the action of the hinges, so it normally takes effort to open/close the
shutters.

Any ideas? I think the solution must involve the hinge pins - is there a
"trick" for this?



Place a small sharp cold chisel, or similar, against the folds of the hinge,
then tap them in with a hammer to tighten them around the pin. Don't hit
them to hard or you might snap or cut something.


---
www.basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.535 / Virus Database: 330 - Release Date: 01/11/03