DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Fridge thermostat adjustment (https://www.diybanter.com/uk-diy/323700-fridge-thermostat-adjustment.html)

Paul D Smith May 24th 11 01:46 PM

Fridge thermostat adjustment
 
Servis fridge. Always very cold and compressor on. Replaced thermostat,
same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled with
these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


harry May 24th 11 07:16 PM

Fridge thermostat adjustment
 
On May 24, 12:46*pm, "Paul D Smith" wrote:
Servis fridge. *Always very cold and compressor on. *Replaced thermostat,
same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. *Having fiddled with
these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)

Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.

Paul D Smith May 25th 11 09:15 AM

Fridge thermostat adjustment
 
"harry" wrote in message
...
On May 24, 12:46 pm, "Paul D Smith" wrote:
Servis fridge. Always very cold and compressor on. Replaced thermostat,
same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled
with
these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)

Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.


Thanks Harry - I believe the brass screw is the temp, and the one working
against the spring is the hysteresis. I'm guessing that tightening against
the spring increases the hysteresis - we'll see ;-).

Paul DS.


Mr Pounder[_2_] May 25th 11 07:02 PM

Fridge thermostat adjustment
 

"Paul D Smith" wrote in message
...
"harry" wrote in message
...
On May 24, 12:46 pm, "Paul D Smith" wrote:
Servis fridge. Always very cold and compressor on. Replaced
thermostat,
same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled
with
these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)

Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.


Thanks Harry - I believe the brass screw is the temp, and the one working
against the spring is the hysteresis. I'm guessing that tightening
against the spring increases the hysteresis - we'll see ;-).

Paul DS.


Stats come preset, you really should not have to take them apart.
I trust the OP has secured the end of the capillary tube to the evaporator
plate?





harry May 25th 11 08:21 PM

Fridge thermostat adjustment
 
On May 25, 6:02*pm, "Mr Pounder"
wrote:
"Paul D Smith" wrote in ...





"harry" wrote in message
....
On May 24, 12:46 pm, "Paul D Smith" wrote:
Servis fridge. *Always very cold and compressor on. *Replaced
thermostat,
same results!


There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. *Having fiddled
with
these the fridge is better, but how do I adjust this properly?


Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)


Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.


Thanks Harry - I believe the brass screw is the temp, and the one working
against the spring is the hysteresis. *I'm guessing that tightening
against the spring increases the hysteresis - we'll see ;-).


Paul DS.


Stats come preset, you really should not have to take them apart.
I trust the OP has secured the end of the capillary tube to the evaporator
plate?



- Hide quoted text -

- Show quoted text -- Hide quoted text -

- Show quoted text -


True. But if it's not working one has to mess about. Usually they
have lost gas & any adjustment doesn't last. Bloody expensive they are
too.

harry May 25th 11 08:26 PM

Fridge thermostat adjustment
 
On May 25, 8:15*am, "Paul D Smith" wrote:
"harry" wrote in message

...





On May 24, 12:46 pm, "Paul D Smith" wrote:
Servis fridge. *Always very cold and compressor on. *Replaced thermostat,
same results!


There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. *Having fiddled
with
these the fridge is better, but how do I adjust this properly?


Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)


Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.


Thanks Harry - I believe the brass screw is the temp, and the one working
against the spring is the hysteresis. *I'm guessing that tightening against
the spring increases the hysteresis - we'll see ;-).

Paul DS.- Hide quoted text -

- Show quoted text -


There are different ones for different numbers of "star" fridges/
freezers.
There are several gases which evaporate at different temperatures
too. All effects the setting of the stat.

Mr Pounder[_2_] May 25th 11 09:22 PM

Fridge thermostat adjustment
 

"harry" wrote in message
...
On May 25, 6:02 pm, "Mr Pounder"
wrote:
"Paul D Smith" wrote in
...





"harry" wrote in message
...
On May 24, 12:46 pm, "Paul D Smith" wrote:
Servis fridge. Always very cold and compressor on. Replaced
thermostat,
same results!


There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled
with
these the fridge is better, but how do I adjust this properly?


Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)


Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.


Thanks Harry - I believe the brass screw is the temp, and the one
working
against the spring is the hysteresis. I'm guessing that tightening
against the spring increases the hysteresis - we'll see ;-).


Paul DS.


Stats come preset, you really should not have to take them apart.
I trust the OP has secured the end of the capillary tube to the evaporator
plate?



- Hide quoted text -

- Show quoted text -- Hide quoted text -

- Show quoted text -


True. But if it's not working one has to mess about. Usually they
have lost gas & any adjustment doesn't last. Bloody expensive they are
too.

One should not have to mess about with a thermostat in a domestic unit. What
you are doing is very unusual.
I strongly suspect the stat is not the problem.
Trade a stat is a fiver and they do not lose vapour unless damaged.
How old is your fridge?
Is it a fridge or a fridge freezer.





Tabby May 26th 11 02:32 AM

Fridge thermostat adjustment
 
On May 25, 8:22*pm, "Mr Pounder"
wrote:
"harry" wrote in message

...
On May 25, 6:02 pm, "Mr Pounder"
wrote:



"Paul D Smith" wrote in
...


"harry" wrote in message
....
On May 24, 12:46 pm, "Paul D Smith" wrote:
Servis fridge. Always very cold and compressor on. Replaced
thermostat,
same results!


There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled
with
these the fridge is better, but how do I adjust this properly?


Thanks,
Paul DS


One screw will be for the temp setting, the other to vary the
differential (or hysteresis) between switch on/switch off. (Ie to stop
it coming on and off too frequently)


Some fridge compressors don't like being started until the gas
pressures have equalised, so the differential needs to take this into
account.


Thanks Harry - I believe the brass screw is the temp, and the one
working
against the spring is the hysteresis. I'm guessing that tightening
against the spring increases the hysteresis - we'll see ;-).


Paul DS.


Stats come preset, you really should not have to take them apart.
I trust the OP has secured the end of the capillary tube to the evaporator
plate?


- Hide quoted text -


- Show quoted text -- Hide quoted text -


- Show quoted text -


True. But if it's not working one has to mess about. *Usually they
have lost gas & any adjustment doesn't last. Bloody expensive they are
too.

One should not have to mess about with a thermostat in a domestic unit. What
you are doing is very unusual.
I strongly suspect the stat is not the problem.
Trade a stat is a fiver and they do not lose vapour unless damaged.
How old is your fridge?
Is it a fridge or a fridge freezer.


At teh end of the day, if you're getting the right temp in the fridge
and the compressor isnt trying multiple timse to start, I shouldnt
worry.


NT

Paul D Smith May 26th 11 09:32 AM

Fridge thermostat adjustment
 
Stats come preset, you really should not have to take them apart.
I trust the OP has secured the end of the capillary tube to the evaporator
plate?


Who said I took it apart :-) ? On this model of servis fridge, the
capillary is slid into a tube which descends into the bowls of the
fridge/freezer, never to be seen again. The old one slid out easily and
there was no hint of any clip etc.

As to the thermostat itself, it has some slots around the edges which is how
I can see the spring and both screws are exposed, presumably for adjustment.

Paul DS


Mr Pounder[_2_] May 26th 11 05:29 PM

Fridge thermostat adjustment
 

"Paul D Smith" wrote in message
...
Stats come preset, you really should not have to take them apart.
I trust the OP has secured the end of the capillary tube to the
evaporator plate?


Who said I took it apart :-) ? On this model of servis fridge, the
capillary is slid into a tube which descends into the bowls of the
fridge/freezer, never to be seen again. The old one slid out easily and
there was no hint of any clip etc.

As to the thermostat itself, it has some slots around the edges which is
how I can see the spring and both screws are exposed, presumably for
adjustment.

Paul DS


Fixed it then have you?
Hmmm?






[email protected] July 28th 16 03:37 PM

Fridge thermostat adjustment
 
On Tuesday, 24 May 2011 12:46:55 UTC+1, Paul D Smith wrote:
Servis fridge. Always very cold and compressor on. Replaced thermostat,
same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled with
these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


I am adjusting a thermostat in a lada fridge there are 3 screws
1 contact spacing I think is hysteresis and temp
2 coil spring i think is course temp
3 leaf spring is fine temp
I am not a refrigeration engineer but manage to repair most things.

The Other John[_3_] July 28th 16 04:22 PM

Fridge thermostat adjustment
 
On Thu, 28 Jul 2016 06:37:34 -0700, richard wrote:

I am not a refrigeration engineer but manage to repair most things.


Could you have a go at your comma key, it doesn't seem to be working! :)

--
TOJ.

Brian Gaff July 28th 16 10:59 PM

Fridge thermostat adjustment
 
Back in time again then...
2011.
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!
wrote in message
...
On Tuesday, 24 May 2011 12:46:55 UTC+1, Paul D Smith wrote:
Servis fridge. Always very cold and compressor on. Replaced thermostat,
same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled
with
these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


I am adjusting a thermostat in a lada fridge there are 3 screws
1 contact spacing I think is hysteresis and temp
2 coil spring i think is course temp
3 leaf spring is fine temp
I am not a refrigeration engineer but manage to repair most things.




Johnny B Good July 28th 16 11:59 PM

Fridge thermostat adjustment
 
On Thu, 28 Jul 2016 14:22:47 +0000, The Other John wrote:

On Thu, 28 Jul 2016 06:37:34 -0700, richard wrote:

I am not a refrigeration engineer but manage to repair most things.


Could you have a go at your comma key, it doesn't seem to be working!
:)


Not only that but his full stop key is similarly broken (and there seems
to be an intermittent problem with his shift key too). :-)

--
Johnny B Good

Johnny B Good July 29th 16 04:34 AM

Fridge thermostat adjustment
 
On Thu, 28 Jul 2016 21:59:15 +0000, Johnny B Good wrote:

On Thu, 28 Jul 2016 14:22:47 +0000, The Other John wrote:

On Thu, 28 Jul 2016 06:37:34 -0700, richard wrote:

I am not a refrigeration engineer but manage to repair most things.


Could you have a go at your comma key, it doesn't seem to be working!
:)


Not only that but his full stop key is similarly broken (and there
seems
to be an intermittent problem with his shift key too). :-)


But, as Brian observed, he's probably got those problems well sorted out
by now (some five and a bit years later). Never mind eh? Better late than
never I suppose. :-)

--
Johnny B Good

David July 29th 16 04:41 PM

Fridge thermostat adjustment
 
On Thu, 28 Jul 2016 06:37:34 -0700, richard wrote:

On Tuesday, 24 May 2011 12:46:55 UTC+1, Paul D Smith wrote:
Servis fridge. Always very cold and compressor on. Replaced
thermostat, same results!

There are two adjustments screws, a small brass one apparently moving
contacts and a larger screw working against a spring. Having fiddled
with these the fridge is better, but how do I adjust this properly?

Thanks,
Paul DS


I am adjusting a thermostat in a lada fridge there are 3 screws 1
contact spacing I think is hysteresis and temp 2 coil spring i think is
course temp 3 leaf spring is fine temp I am not a refrigeration engineer
but manage to repair most things.


Just checking - is a Lada fridge a cheap copy of an old Fiat fridge and
made in Russia?



--
Windows 8.1 on PCSpecialist box

Graham.[_11_] July 29th 16 08:05 PM

Fridge thermostat adjustment
 
On Thu, 28 Jul 2016 21:59:15 GMT, Johnny B Good
wrote:

On Thu, 28 Jul 2016 14:22:47 +0000, The Other John wrote:

On Thu, 28 Jul 2016 06:37:34 -0700, richard wrote:

I am not a refrigeration engineer but manage to repair most things.


Could you have a go at your comma key, it doesn't seem to be working!
:)


Not only that but his full stop key is similarly broken (and there seems
to be an intermittent problem with his shift key too). :-)


I think he is asking about the heater in his Soviet era car. (BICBW)



--

Graham.

%Profound_observation%


All times are GMT +1. The time now is 09:41 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter