Fitting connected flexible shower feed to shower bar valve
 

Can anyone tell me the name of the threaded fitment I have connecting
a 15 mm flexible pipe with a female 1/2 inch BSP end to the female 3/4
inch BSP fittings on a bar thermostatic shower?

Unfortunately my card reader has packed up so I am unable to post a
picture.

It is a fully threaded 2.5 inch long fitting, with a male 1/2" BSP
thread at one end (to connect with the flexible pipe), and a male 3/4"
BSP thread at the other end (to connect with the shower fitting). I
have also noticed that the fitting has a mesh filter so would seem to
be a dedicated shower fitting. I need to know what they are called so
I can get hold of a pair 1/2 inch longer (i.e. 3 inches) as I have
strengthened the piece of plasterboard they go through with a thicker
piece of wood.

I posted about this before, but did not make myself very clear, for
which I apologise.
Keith

Fitting connected flexible shower feed to shower bar valve
 

On Sun, 13 Mar 2011 09:18:17 -0700, Keefiedee wrote:

Anyway, it looks like what I need is a straight inlet connector, so
thank you everyone, and sorry for being a pain.

You may like to check the articles on the wiki about fitting bar-type
shower mixer valves





--
John Stumbles -- http://yaph.co.uk

Eagles may soar, but weasels don't get sucked into jet engines.