UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 43,017
Default Threaded blind rivet gun

In article
,
fred wrote:
Never had or used one, or even knew of their existence until recently
but now have to install 100-200 of them. The question is, are the
cheap ones, ( Silver Line mostly ), available on eBay worth a curse or
would something like the Sealey one be worth the extra investment. I
can see myself having further uses of what appears to be a very
convenient fixing but on the other hand money is tight


I have the Silverline one and it does the job. Says it has a lifetime
warranty too.

It does need some skill - unlike say a pop riveter. It's possible to strip
the rivet thread on the smaller sizes if you use too much force and the
larger ones are quite hard work. There is an adjustable stop to prevent
using too much force - but it's not simple to set.

For occasional use it's ok though. If I were using it a lot I'd like
something better. But at about 20 quid delivered from Ebay good enough
value.

If I had to do 200 straight off, I'd want something better. But for the
one or two I need once in a while it's fine.

--
*Why is the third hand on the watch called a second hand?

Dave Plowman London SW
To e-mail, change noise into sound.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Threaded blind rivet gun Andy Dingley UK diy 0 February 27th 11 08:47 PM
Building an axle puller- Source for hardened threaded rod/screws, andthrough-hole threaded material for same? Dave__67 Metalworking 19 April 24th 10 12:43 PM
rivet gun Stupendous Man Metalworking 6 November 8th 07 04:14 AM
looking for particular form of blind rivet _[_2_] Metalworking 5 October 17th 07 10:43 PM
Blind threaded inserts into plywood? Drew Eckhardt Woodworking 10 June 2nd 05 03:00 PM


All times are GMT +1. The time now is 07:13 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"