 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Pointing with Lead Mate: what to use to pack joint?
I need to re-point some lead flashing with Lead Mate as there's movement
which has cracked the mortar. Its a wide joint (old, cheap Victorian house) - 25mm plus. The makers recommend the depth of Lead Mate should be only half the width. But raking out the old pointing leaves a depth of 25mm or more. What can I pack this with to make the joint shallower before using the Lead mate pl? -- Robin PM may be sent to rbw0{at}hotmail{dot}com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2 Pack Bostitch SHCR5019-1/4-5 1/4" Staples for H2B 5800 per Pack | Electronics Repair | |||
| T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (1/1) | Woodworking Plans and Photos | |||
| T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (0/1) | Woodworking Plans and Photos | |||
| flat lead roof - brick joint | UK diy | |||
| Scarf joint or butt joint your choice on crown molding? | Woodworking | |||
Threaded Mode
