Baxi Bermuda BBU HE ~ anyone here have experience of these?
 

Do you knowledgeable folk have any experience of these please?

We have to take the plunge and replace an existing 30+YO New World 11Kw back
boiler with something new.
Flue is extendable single wall stainless steel within existing chimney.
150mm I think.

Baxi seem to have the market cornered but this boiler looks good for the
purpose.
It is relatively new to market so some user or installer views would be
welcomed.
Location is in a hearth in what is now a utility room, this hearth is ducted
directly to an airbrick. The existing firefront has not been used in 25
years (and is quite hideous).
We don't have available space for a more conventional boiler.
The latest Baxi incarnation has remote boiler controls which could be very
useful, the firefront is separately powered from a nearby 13A socket.
15Kw output and no doubt improved efficiency will, without doubt, be a
blessing.
This boiler would allow us to use existing pipework without huge disruption.
As far as I have been able to find out there is no connection between boiler
and firefront.
That is the basic situation.

a few questions:
Any pros/cons for this Baxi?
Can the existing flue be used?
Most importantly. Can the boiler function without a firefront? Firefront
would never be used and is ruddy expensive.
I asked this question of Baxi and they say the boiler cannot operate without
a firefront as they work together. I had expected this reply.
The firefront is separately supplied electrically with its own controls and
AFAIK is not connected to the boiler (please tell me if I'm wrong).

Many thanks,

Nick.

Baxi Bermuda BBU HE ~ anyone here have experience of these?
 

"Owain" wrote in message
...
On 2 Dec, 18:44, "Nick" wrote:
Location is in a hearth in what is now a utility room, this hearth is
ducted
directly to an airbrick. The existing firefront has not been used in 25
years (and is quite hideous).
We don't have available space for a more conventional boiler.

Could you knock out the front of the chimney (extend the fire opening
upwards with a new lintel) and mount a new boiler between the side
walls of the chimney? That wouldn't take up any more space - indeed,
could give you some extra storage space beneath the boiler.

On a quick skim through the Baxi thing, I didn't notice any mention of
condensate drain

Owain

It would be possible to extend the existing fireplace to accommodate a
conventional boiler.
This would involve quite considerable work including major structural annd
pipework modifications etc.
It is our intention to leave this house within a couple of years.
The house will be left in good and working order but you may understand that
we don't want to make unneccessary expenditure.
It took me some while to find decent specs for this Baxi thing (even on the
Baxi site).
The boiler contains a cistern to collect condensate and a pump to clear that
cistern via 10mm pipework.
This sounds fine in theory but I am not convinced that it would work well in
the long term.
However, and unfortunately, I would not expect any boiler to give the 30
years + that the existing New World gadget has done.
From what I have read 5 years is good and 10 years extraordinary for any
modern appliance.
Thank you for your reply.

Nick.

Baxi Bermuda BBU HE ~ anyone here have experience of these?
 

In an earlier contribution to this discussion,
Owain wrote:

On 2 Dec, 18:44, "Nick" wrote:
Location is in a hearth in what is now a utility room, this hearth
is ducted directly to an airbrick. The existing firefront has not
been used in 25 years (and is quite hideous).
We don't have available space for a more conventional boiler.

Could you knock out the front of the chimney (extend the fire opening
upwards with a new lintel) and mount a new boiler between the side
walls of the chimney? That wouldn't take up any more space - indeed,
could give you some extra storage space beneath the boiler.

On a quick skim through the Baxi thing, I didn't notice any mention of
condensate drain

Owain


Well, in
http://www.24dash.com/news/Housing/2...o-Baxi-Bermuda
it says:

"The integral condensate pump allows the condensate to be discharged into
the drain via a 10mm pipe which fits neatly along the skirting.
Alternatively it can routed vertically into the soil stack. "
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!

Baxi Bermuda BBU HE ~ anyone here have experience of these?
 

In an earlier contribution to this discussion,
Nick wrote:


a few questions:
Any pros/cons for this Baxi?

Well, it appears to be a high efficiency replacement for earlier models -
meeting current regs but still installed in the fireplace.

Can the existing flue be used?

Not the existing flue liner - it needs a new concentric one 'cos it's room
sealed.

Most importantly. Can the boiler function without a firefront?
Firefront would never be used and is ruddy expensive.
I asked this question of Baxi and they say the boiler cannot operate
without a firefront as they work together. I had expected this reply.
The firefront is separately supplied electrically with its own
controls and AFAIK is not connected to the boiler (please tell me if
I'm wrong).
Dunno. It appears to be an electric fire rather than gas like earlier
models. It *should* work without it - unless there are any interlocks to
prevent the boiler working without the fire being fitted - but hopefully
not. You'd have to fill the hole with *something* of course!
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!

Baxi Bermuda BBU HE ~ anyone here have experience of these?
 

On Wed, 2 Dec 2009 23:15:16 -0000, "Nick" wrote:


"Owain" wrote in message
...
On 2 Dec, 18:44, "Nick" wrote:
Location is in a hearth in what is now a utility room, this hearth is
ducted
directly to an airbrick. The existing firefront has not been used in 25
years (and is quite hideous).
We don't have available space for a more conventional boiler.

Could you knock out the front of the chimney (extend the fire opening
upwards with a new lintel) and mount a new boiler between the side
walls of the chimney? That wouldn't take up any more space - indeed,
could give you some extra storage space beneath the boiler.

On a quick skim through the Baxi thing, I didn't notice any mention of
condensate drain

Owain

It would be possible to extend the existing fireplace to accommodate a
conventional boiler.
This would involve quite considerable work including major structural annd
pipework modifications etc.
It is our intention to leave this house within a couple of years.
The house will be left in good and working order but you may understand that
we don't want to make unneccessary expenditure.
It took me some while to find decent specs for this Baxi thing (even on the
Baxi site).
The boiler contains a cistern to collect condensate and a pump to clear that
cistern via 10mm pipework.
This sounds fine in theory but I am not convinced that it would work well in
the long term.
However, and unfortunately, I would not expect any boiler to give the 30
years + that the existing New World gadget has done.
From what I have read 5 years is good and 10 years extraordinary for any
modern appliance.
Thank you for your reply.

If you are leaving the house soon then why replace the boiler?

--
(\__/) M.
(='.'=) Due to the amount of spam posted via googlegroups and
(")_(") their inaction to the problem. I am blocking most articles
posted from there. If you wish your postings to be seen by
everyone you will need use a different method of posting.
[Reply-to address valid until it is spammed.]