Kitchen fitting - gap behind unit and cover panel question
 

Hi,

I am fitting an Ikea kitchen and have a problem with a tall oven unit
with a wall to one side and base and wall units to the other.

The wall behind the units is not vertical and so when the unit is plum
there is a gap behind (increases from floor to top of unit).

I will attach a cover panel to the tall unit on the side which has
adjacent base and wall units to hide the white side but this will
still leave the gap showing.

The gap behind the base units will be hidden by the worktop, but how
can I avoid/hide the gap along the side of the tall unit between the
base and wall cabinet (gap about 5 mm increasing to 10 mm)? I am
planning on tiling between the base and wall cabinets.

Many thanks.

Kitchen fitting - gap behind unit and cover panel question
 

"nafuk" wrote in message
...

The gap behind the base units will be hidden by the worktop, but how
can I avoid/hide the gap along the side of the tall unit between the
base and wall cabinet (gap about 5 mm increasing to 10 mm)? I am
planning on tiling between the base and wall cabinets.

If I understand you correctly, you are talking about the space twix worktop
and underside of wall cabs?? If so and you are tiling the wall then most fo
the gap will be covered by the edge of the tiles/adhesive and a run of
silicon sealant to finish off will cover any remaining gap.

HTH

John