How to attach a pool filter to a paddling pool.
I have acquired an 8fit paddling pool (PVC canvas) as well as filter pump
(for the kids...obviously). However the pool has no inlet/outlet flanges (is that the corect term) below water level to connect the filter pump to. The filter pumps pipes are 1 1./4" (32mm). Any idea were I can get some 1 1/4" (or better 1" so pipe goes over) flanges from that as suitable attaching to PVC/canvas. Needs to be reasonably cheap, I notice RS sell PVC flanges and associated metal work but would cost about £50 to make two off. Any one got any ideas how to plumb in 1 1/4" pipe below water level ? |
How to attach a pool filter to a paddling pool.
On Thu, 09 Jul 2009 15:56:09 +0100, Ian Middleton wrote:
Any one got any ideas how to plumb in 1 1/4" pipe below water level ? pipework that hangs over the edge of the pool, pump/filter externally at floor level? Some way of priming the pump presumably needed, but maybe it's an option if you're looking at 50 quid for bits otherwise... |
How to attach a pool filter to a paddling pool.
"Jules" wrote in message
ail.com... On Thu, 09 Jul 2009 15:56:09 +0100, Ian Middleton wrote: Any one got any ideas how to plumb in 1 1/4" pipe below water level ? pipework that hangs over the edge of the pool, pump/filter externally at floor level? Some way of priming the pump presumably needed, but maybe it's an option if you're looking at 50 quid for bits otherwise... This is the first option I will be trying if it would stop raining !!!! Shame the pump isn't submersible as that would be a solution. Its a Bestway 800 pool filter pump. |
How to attach a pool filter to a paddling pool.
On 9 July, 15:56, "Ian Middleton" wrote:
I have acquired an 8fit paddling pool (PVC canvas) as well as filter pump (for the kids...obviously). However the pool has no inlet/outlet flanges (is that the corect term) below water level to connect the filter pump to. The filter pumps pipes are 1 1./4" (32mm). Any idea were I can get some 1 1/4" (or better 1" so pipe goes over) flanges from that as suitable attaching to PVC/canvas. Needs to be reasonably cheap, I notice RS sell *PVC flanges and associated metal work but would cost about £50 to make two off. Any one got any ideas how to plumb in 1 1/4" pipe below water level ? MIght be cheaper to just to buy a cheap submersible pump? Pond supplies do various flanges for bottom drains and the like so you could search for those. |
All times are GMT +1. The time now is 11:01 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter