UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,538
Default Too remove or not remove rubbery floor glue?

Hi,

Just peeled some more old flooring up in the bungalow. It had been stuck
down with what looks like industrial evo-stick. The flooring cleaved off
with a spade, but there remains a layer a mm or two thick of the rubbery
adhesive.

Seems stable - stable enough that a spade won't touch it.

My inclination is to stick my insulation board straight to this - I'll be
using a cementous tile adhesive to do this.

Now, ideally (and according to the adhesive manufacturer) I should remove
the rubber gunk. But quite frankly, given it's in the surface of the
screed, it would need either a million gallons of petrol, a mega scrabbling
machine or semtex.

Has anyone any bad experiences of tiling straight over this sort of stuff?

Cheers

Tim

PS

Stripped the last room of wallpaper today and removed the old bog and basin
upstairs. Need to wash down two ceilings, clear a load of manky glass wool
and some plasterboard upstairs, then I'm ready for some serious
reconstruction. Photos will come. Had another bay window ceiling off and
pleased to say, not rot, despite evidence of previous leaks.

PPS Getting ready to install new CU. Got 5m of this in 32mm size:

http://uk.rs-online.com/web/search/s...ct&R=062371 0

and a bag of these:

http://uk.rs-online.com/web/search/s...ct&R=012110 7

to run the meter tails through. I have to take the tails out the side of the
meter box and up through the eaves, so I needed something tough and with
good ends to form a decent seal to the box.

Tough is an understatement - it's about 4mm thick plastic and the
terminations look like tank connectors. Only disadvantage is poor bend
radius, but I have a route for it that should work quite well. The route
doesn't demand "mechanical protection" in the IEE meaning of the phrase,
but this stuff does seem to offer pretty good general protection -
definately better than just dangling some tails though the roof space.
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,118
Default Too remove or not remove rubbery floor glue?

Tim S wrote:
Just peeled some more old flooring up in the bungalow. It had been stuck
down with what looks like industrial evo-stick. The flooring cleaved off
with a spade, but there remains a layer a mm or two thick of the rubbery
adhesive.


snip

Has anyone any bad experiences of tiling straight over this sort of stuff?



Yes, I went over it with a levelling screed, which gave me a smooth and
level surface to tile on to.

  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 25,191
Default Too remove or not remove rubbery floor glue?

Bruce wrote:
Tim S wrote:
Just peeled some more old flooring up in the bungalow. It had been stuck
down with what looks like industrial evo-stick. The flooring cleaved off
with a spade, but there remains a layer a mm or two thick of the rubbery
adhesive.


snip

Has anyone any bad experiences of tiling straight over this sort of stuff?



Yes, I went over it with a levelling screed, which gave me a smooth and
level surface to tile on to.


A shop fitters trick for killing off the stickyness of surfaces like
this is to sweep some dry levelling compound powder over it. It sets
into all the sticky bits and stabilises them.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/
  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,538
Default Too remove or not remove rubbery floor glue?

John Rumm coughed up some electrons that declared:

Bruce wrote:
Tim S wrote:
Just peeled some more old flooring up in the bungalow. It had been stuck
down with what looks like industrial evo-stick. The flooring cleaved off
with a spade, but there remains a layer a mm or two thick of the rubbery
adhesive.


snip

Has anyone any bad experiences of tiling straight over this sort of
stuff?



Yes, I went over it with a levelling screed, which gave me a smooth and
level surface to tile on to.


A shop fitters trick for killing off the stickyness of surfaces like
this is to sweep some dry levelling compound powder over it. It sets
into all the sticky bits and stabilises them.



Ah. I seem to have already achieved that with plaster dust

It was only the technical bloke from Mapei who said "scrape it off" that
made me think - but then, I suppose he'd have to say that.

The first Mapei bloke was a bit more helpful, in that he said (of sticking
Marmox to concrete with no DPM): "well, we can't guarantee it won't fall of
in 20-30 years due to hyrdostatic pressure - but KeraQuick's your best bet
of all our products". Simple advice with pros and cons - then I can make an
informed decision.

Cheers

Tim
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,538
Default Too remove or not remove rubbery floor glue?

Bruce coughed up some electrons that declared:

Tim S wrote:
Just peeled some more old flooring up in the bungalow. It had been stuck
down with what looks like industrial evo-stick. The flooring cleaved off
with a spade, but there remains a layer a mm or two thick of the rubbery
adhesive.


snip

Has anyone any bad experiences of tiling straight over this sort of stuff?



Yes, I went over it with a levelling screed, which gave me a smooth and
level surface to tile on to.


Ah yes - that stuff sticks to everything. It's an option.

Cheers

Tim


  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,118
Default Too remove or not remove rubbery floor glue?

Tim S wrote:
Bruce coughed up some electrons that declared:

Tim S wrote:
Just peeled some more old flooring up in the bungalow. It had been stuck
down with what looks like industrial evo-stick. The flooring cleaved off
with a spade, but there remains a layer a mm or two thick of the rubbery
adhesive.


snip

Has anyone any bad experiences of tiling straight over this sort of stuff?



Yes, I went over it with a levelling screed, which gave me a smooth and
level surface to tile on to.


Ah yes - that stuff sticks to everything. It's an option.



It's probably just a coincidence but the levelling screed I use is from
Evo Stik. ;-)

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solvent to remove glue from PCB? Mr. Land Electronics Repair 5 October 12th 15 01:30 PM
How remove hot glue residue? Fred Woodturning 5 September 14th 06 11:39 PM
Remove Carpet Glue On Top of Carpeting Kerry Home Repair 2 April 14th 06 05:04 PM
remove carpet glue Rookie Home Repair 5 April 13th 06 05:58 PM
How remove old glue from plastic? Al Franz Woodworking 14 October 14th 05 07:00 PM


All times are GMT +1. The time now is 01:10 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"