Cellar Tanking Membrane Ventilation
 

I've been planning to do this job for two years now - the first year of
that was before we even lived in the house :)

I'm going to tank our damp but not wet cellar using a membrane. I've
been told that you leave the top on the membrane open at joist level to
allow the wall to breath, so I assume that I will need to add plenty of
ventilation at joist level (just above ground level in effect) to allow
the damp to get away, but is there a better way to do it than adding a
few air bricks round the house? Currently there are only three points
the cellar can breath, and one of those is the coal chute so is not
properly open because it has a cover on it.

BTW, I'm not talking about the ventilation for the rooms that the cellar
will have after tanking - I was planning on using a humidistat
controlled fan to vent those to keep any damp down.

The house is a 1902 9" solid brick wall built one.

Cheers.

Cellar Tanking Membrane Ventilation
 

Danny Monaghan wrote:
I've been planning to do this job for two years now - the first year
of that was before we even lived in the house :)

I'm going to tank our damp but not wet cellar using a membrane. I've
been told that you leave the top on the membrane open at joist level
to allow the wall to breath, so I assume that I will need to add
plenty of ventilation at joist level (just above ground level in
effect) to allow the damp to get away, but is there a better way to
do it than adding a few air bricks round the house? Currently there
are only three points the cellar can breath, and one of those is the
coal chute so is not properly open because it has a cover on it.


cross-flow ventilation is what it needs, and simply adding one or two extra
9 X 6 airbricks per elevation is the simplest, cheapest and most effective
way of achieving this

BTW, I'm not talking about the ventilation for the rooms that the
cellar will have after tanking - I was planning on using a humidistat
controlled fan to vent those to keep any damp down.

The house is a 1902 9" solid brick wall built one.

Cheers.

Cellar Tanking Membrane Ventilation
 

In article ,
"Phil L" writes:
Danny Monaghan wrote:
I've been planning to do this job for two years now - the first year
of that was before we even lived in the house :)

I'm going to tank our damp but not wet cellar using a membrane. I've
been told that you leave the top on the membrane open at joist level
to allow the wall to breath, so I assume that I will need to add
plenty of ventilation at joist level (just above ground level in
effect) to allow the damp to get away, but is there a better way to
do it than adding a few air bricks round the house? Currently there
are only three points the cellar can breath, and one of those is the
coal chute so is not properly open because it has a cover on it.


cross-flow ventilation is what it needs, and simply adding one or two extra
9 X 6 airbricks per elevation is the simplest, cheapest and most effective
way of achieving this

BTW, I'm not talking about the ventilation for the rooms that the
cellar will have after tanking - I was planning on using a humidistat
controlled fan to vent those to keep any damp down.

I would do the ventilation first. That might turn out to be all
you need to do.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

Cellar Tanking Membrane Ventilation
 

On Thu, 17 Apr 2008 14:41:51 +0100, a particular chimpanzee, Danny
Monaghan randomly hit the keyboard and
produced:

I'm going to tank our damp but not wet cellar using a membrane. I've
been told that you leave the top on the membrane open at joist level to
allow the wall to breath, so I assume that I will need to add plenty of
ventilation at joist level (just above ground level in effect) to allow
the damp to get away, but is there a better way to do it than adding a
few air bricks round the house? Currently there are only three points
the cellar can breath, and one of those is the coal chute so is not
properly open because it has a cover on it.

BTW, I'm not talking about the ventilation for the rooms that the cellar
will have after tanking - I was planning on using a humidistat
controlled fan to vent those to keep any damp down.

The house is a 1902 9" solid brick wall built one.

If you are you creating rooms down there, then you will need a proper
tanking system (ie, one with a BBA certificate). A membrane won't do
anything but trap the moisture on the inside of the wall with nowhere
to go. You'll also need insulation to the walls and floors to comply
with the Building Regulations.

There are essentially two ways of tanking a basement:
1. Preventing any moisture from penetrating the walls and floor.
Waterproof material is added to the walls and floor, such as Vandex or
Synthaprufe.
2. Allowing any water coming through the structure to drain away
before it reaches the inner surfaces. A raised membrane (rather like
an egg tray) is attached to the walls and floor allowing drainage
behind, with a sump at low level to collect the water. This may need
a pump to drain away.
--
Hugo Nebula
"If no-one on the internet wants a piece of this,
just how far from the pack have you strayed?"