DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Pipe cutting (https://www.diybanter.com/uk-diy/220573-pipe-cutting.html)

[email protected] November 11th 07 04:43 AM

Pipe cutting
 
Check out this new pipe cutter (PCS-8) from T-Drill. See video at
http://www.t-drill.com/Pipe-Cutter.html

Tell me what you think?


Daff0 November 11th 07 05:21 AM

Pipe cutting
 
On Nov 11, 2:43 pm, wrote:
Check out this new pipe cutter (PCS-8) from T-Drill. See video athttp://www.t-drill.com/Pipe-Cutter.html

Tell me what you think?


looks great but how much
Daff0
www.buildwealtheasily.com


Ed Sirett November 11th 07 11:22 AM

Pipe cutting
 
On Sun, 11 Nov 2007 04:43:32 +0000, syreja wrote:

Check out this new pipe cutter (PCS-8) from T-Drill. See video at
http://www.t-drill.com/Pipe-Cutter.html

Tell me what you think?


It looks an effective tool but not needed for domestic work and probably
very serious money.

The only sort of pipes it would make a better job on than the tools I
already have would be the larger plastic waste pipes. These latter only
have to be cut reasonably square (+/- 5mm) to work well enough in whatever
fitting they are going into.

--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html

geoff November 11th 07 11:58 AM

Pipe cutting
 
In message . com,
writes
Check out this new pipe cutter (PCS-8) from T-Drill. See video at
http://www.t-drill.com/Pipe-Cutter.html

Tell me what you think?

I think that it's spam, and suffers from a feral apostrophe - i.e.
whoever wrote the website is illiterate

--
geoff

Onetap November 11th 07 01:03 PM

Pipe cutting
 
On 11 Nov, 11:58, geoff wrote:
In message . com,
writesCheck out this new pipe cutter (PCS-8) from T-Drill. See video at
http://www.t-drill.com/Pipe-Cutter.html


Tell me what you think?


I think that it's spam, and suffers from a feral apostrophe - i.e.
whoever wrote the website is illiterate

--
geoff


It is Spam spam.

The contact on the website is . It was posted
here by ; must be on commission.
I wonder if T-drill, a big US corporation, are aware that their
emplyees are apparently spamming all over the internet; a bit
unprofessional. Can't they afford advertising?

Their T-drill is a uniquely merikan bit of kit.
http://www.t-drill.com/t60.html


geoff November 11th 07 07:27 PM

Pipe cutting
 
In message .com,
Onetap writes
On 11 Nov, 11:58, geoff wrote:
In message . com,
writesCheck out this new pipe cutter (PCS-8) from
T-Drill. See video at
http://www.t-drill.com/Pipe-Cutter.html


Tell me what you think?


I think that it's spam, and suffers from a feral apostrophe - i.e.
whoever wrote the website is illiterate

--
geoff


It is Spam spam.

The contact on the website is . It was posted
here by ; must be on commission.
I wonder if T-drill, a big US corporation, are aware that their
emplyees are apparently spamming all over the internet; a bit
unprofessional. Can't they afford advertising?

Their T-drill is a uniquely merikan bit of kit.
http://www.t-drill.com/t60.html

No, really ?

Well, I never ...

--
geoff

Onetap November 12th 07 08:13 PM

Pipe cutting
 
On 11 Nov, 19:27, geoff wrote:

Well, I never ...

--
geoff-


Yes, really.
Spam from petty fraudsters is usual; spam from big, established
septic companies is quite unusual.

BTW, has anyone in the UK ever seen a T-drill in use?
There are some hand tools used to form a branch in large bore copper
for drains, but I've never seen them.


geoff November 12th 07 10:52 PM

Pipe cutting
 
In message .com,
Onetap writes
On 11 Nov, 19:27, geoff wrote:

Well, I never ...

--
geoff-


Yes, really.
Spam from petty fraudsters is usual; spam from big, established
septic companies is quite unusual.

Nopt that unusual - I've written abusive and threatening emails to quite
a few - even got an account or two pulled

--
geoff


All times are GMT +1. The time now is 09:54 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter