Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Tools for Vented Dryer Hole in the Wall
I need to drill a 105 mm diameter hole in a masonry wall 300 mm thick.
It is for the installation of a Miele vented dryer. All I have is a 750W Bosch SDS Plus drill and some long enough drill bits What other bits and pieces do I need? I guess I need one of these: http://www.screwfix.com/app/sfd/cat/...88072&id=17748 and one of these: http://www.screwfix.com/app/sfd/cat/...8110&id=14520# I have a 20mm drill already, can I use it as a pilot drill? Also, what tips and advice do I need to take into account? How do you break the core? With a hammer and chisel? I have never drilled a hole this big. I have drilled the same wall for a 15mm pipe with a normal SDS Plus drill and was easy, but 105mm is new to me. Thanks, Antonio |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tools for drilling a bloody big hole | UK diy | |||
How fat is the hose from a vented tumble dryer? | UK diy | |||
Vented tumble dryer with vent on right rather than at back - does it exist? | UK diy | |||
Down The Hole Hammer Drilling Tools | Woodworking | |||
High Efficiency Water Heater: Wall vented: Abandon chimney | Home Repair |