DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Sell your scrap copper. (https://www.diybanter.com/uk-diy/198224-sell-your-scrap-copper.html)

Dave Fawthrop April 17th 07 04:50 PM

Sell your scrap copper.
 
I have been throwing my scrap copper and brass into a pile for some years
intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade took
it in for me, but still GBP70 is a loot.
--
Dave Fawthrop sf hyphenologist.co.uk 165 *Free* SF ebooks.
165 Sci Fi books on CDROM, from Project Gutenberg
http://www.gutenberg.org/wiki/Main_Page Completely Free to any
address in the UK. Contact me on the *above* email address.


Jonathan Pearson April 17th 07 05:03 PM

Sell your scrap copper.
 
Dave Fawthrop wrote:
I have been throwing my scrap copper and brass into a pile for some
years intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade
took it in for me, but still GBP70 is a loot.


pre 1992 1 & 2p coins are apparently worth twice their face value in scrap
value - although its illegal to melt them down!
Jon



ARWadsworth April 17th 07 05:43 PM

Sell your scrap copper.
 

"Jonathan Pearson" wrote in message
...
Dave Fawthrop wrote:
I have been throwing my scrap copper and brass into a pile for some
years intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade
took it in for me, but still GBP70 is a loot.


pre 1992 1 & 2p coins are apparently worth twice their face value in scrap
value - although its illegal to melt them down!


A pity you cannot melt coins down, I could have made two new 10p pieces out
of one old one.

Adam


nightjar April 17th 07 06:24 PM

Sell your scrap copper.
 

"Dave Fawthrop" wrote in message
...
I have been throwing my scrap copper and brass into a pile for some years
intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade took
it in for me, but still GBP70 is a loot.


That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass pieces.

Colin Bignell



Mary Fisher April 17th 07 08:11 PM

Sell your scrap copper.
 

"nightjar .uk.com" nightjar@insert my surname here wrote in message
...

"Dave Fawthrop" wrote in message
...
I have been throwing my scrap copper and brass into a pile for some years
intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade
took
it in for me, but still GBP70 is a loot.


That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass
pieces.

Colin Bignell


Yes, we're very careful about sorting - except for ferrous metals which at
the moment aren't bringing a huge amount. Copper, brasses and lead are
valuable. We have a separate bucket for each, Spouse takes them down every
few months. The ferrous stuff goes more or less to get it out of the way.

Mary





Tim Lamb April 17th 07 09:10 PM

Sell your scrap copper.
 
In message , nightjar
writes

That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass pieces.


How much is aluminium then?

I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)

regards

--
Tim Lamb

Mary Fisher April 17th 07 09:32 PM

Sell your scrap copper.
 

"Tim Lamb" wrote in message
...
In message , nightjar
writes

That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass
pieces.


How much is aluminium then?


I forgot about ally :-) We take that too but prices change, sometimes daily.

I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)


If I were anywhere near you ...

Mary



[email protected] April 17th 07 09:53 PM

Sell your scrap copper.
 
On 17 Apr, 21:32, "Mary Fisher" wrote:
"Tim Lamb" wrote in message

...

In message , nightjar
writes


That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass
pieces.


How much is aluminium then?


I forgot about ally :-) We take that too but prices change, sometimes daily.



I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)


If I were anywhere near you ...

Mary


i have a decent amount of lead ... where would i take it?


Roger R April 17th 07 10:31 PM

Sell your scrap copper.
 
"Tim Lamb" wrote in message
...

How much is aluminium then?


Find prices he
http://www.letsrecycle.com/prices/metalsPrices.jsp
or, as a rough guide, the London Metal Exchange prices are he
http://www.lme.co.uk/dataprices_daily_metal.asp

Roger R



Stuart B April 17th 07 10:54 PM

Sell your scrap copper.
 
On Tue, 17 Apr 2007 21:32:46 +0100, "Mary Fisher"
wrote:


"Tim Lamb" wrote in message
...
In message , nightjar
writes

That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass
pieces.


How much is aluminium then?


I forgot about ally :-) We take that too but prices change, sometimes daily.

I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)


If I were anywhere near you ...

Mary


Whats the difference between heavy copper and braziery copper . A
copper cylinder and some pipe ..Is that heavy copper .???

nightjar April 17th 07 11:24 PM

Sell your scrap copper.
 

"Stuart B" wrote in message
...
....
Whats the difference between heavy copper and braziery copper . A
copper cylinder and some pipe ..Is that heavy copper .???


Heavy, in this context, usually means big chunks.

Colin Bignell



nightjar April 17th 07 11:26 PM

Sell your scrap copper.
 

wrote in message
oups.com...
On 17 Apr, 21:32, "Mary Fisher" wrote:
....
i have a decent amount of lead ... where would i take it?


Back to the church roof?

Scrap metal merchants are the place to sell scrap metal though.

Colin Bignell



nightjar April 18th 07 08:29 AM

Sell your scrap copper.
 

"Mary Fisher" wrote in message
t...
....
Yes, we're very careful about sorting - except for ferrous metals which at
the moment aren't bringing a huge amount. Copper, brasses and lead are
valuable. We have a separate bucket for each, Spouse takes them down every
few months. The ferrous stuff goes more or less to get it out of the way.


I've never bothered with getting money for steel scrap. By agreement, it
just goes into the scrap skip at a neighbouring factory. However, there
appears to be enough money in it at the moment to make it worth while for
people to pay our industrial estate for every dumped car removed. A few
years ago we had to pay to have them collected.

Colin Bignell



Dave Fawthrop April 18th 07 08:31 AM

Sell your scrap copper.
 
On Tue, 17 Apr 2007 20:11:58 +0100, "Mary Fisher"
wrote:

|!
|!"nightjar .uk.com" nightjar@insert my surname here wrote in message
...
|!
|! "Dave Fawthrop" wrote in message
|! ...
|!I have been throwing my scrap copper and brass into a pile for some years
|! intending to take it to a scrap merchant sometime.
|!
|! I got GPB 70 for a 32 kg of rubbish.
|! I probably got a good price because my neighbour who was in the trade
|! took
|! it in for me, but still GBP70 is a loot.
|!
|! That sounds as though you either didn't have a lot of copper or didn't
|! separate it out.. Copper by itself should fetch around ?2.80 - ?3.00 / kg
|! this week. ?2.20 / kg is about right for brass swarf or heavy brass
|! pieces.

|!Yes, we're very careful about sorting - except for ferrous metals which at
|!the moment aren't bringing a huge amount. Copper, brasses and lead are
|!valuable. We have a separate bucket for each, Spouse takes them down every
|!few months. The ferrous stuff goes more or less to get it out of the way.

Agreed my neighbour did the sorting and I got GBP 2.15 per kg for
uncontaminated copper, slightly less for copper with solder contamination
and less for brass. Still IMO a lot of loot for small quantities of
rubbish.
--
Dave Fawthrop sf hyphenologist.co.uk 165 *Free* SF ebooks.
165 Sci Fi books on CDROM, from Project Gutenberg
http://www.gutenberg.org/wiki/Main_Page Completely Free to any
address in the UK. Contact me on the *above* email address.


Dave Fawthrop April 18th 07 08:44 AM

Sell your scrap copper.
 
On Tue, 17 Apr 2007 22:31:14 +0100, "Roger R"
wrote:

|!"Tim Lamb" wrote in message
...
|!
|! How much is aluminium then?
|!
|!Find prices he
|!http://www.letsrecycle.com/prices/metalsPrices.jsp

Which apply for *ton* quantities, most of us will have kg quantities for
which you get lower prices.


--
Dave Fawthrop sf hyphenologist.co.uk 165 *Free* SF ebooks.
165 Sci Fi books on CDROM, from Project Gutenberg
http://www.gutenberg.org/wiki/Main_Page Completely Free to any
address in the UK. Contact me on the *above* email address.


Tim Lamb April 18th 07 09:28 AM

Sell your scrap copper.
 
In message , Dave Fawthrop
writes
On Tue, 17 Apr 2007 22:31:14 +0100, "Roger R"
wrote:

|!"Tim Lamb" wrote in message
...
|!
|! How much is aluminium then?
|!
|!Find prices he
|!http://www.letsrecycle.com/prices/metalsPrices.jsp

Which apply for *ton* quantities, most of us will have kg quantities for
which you get lower prices.


I might find a ton:-)

Pay for taking them down, anyway.

Now anyone got a use for lots of 6mm stainless nuts, bolts and washers?

regards
--
Tim Lamb

Mary Fisher April 18th 07 10:07 AM

Sell your scrap copper.
 

"nightjar .uk.com" nightjar@insert my surname here wrote in message
...

"Mary Fisher" wrote in message
t...
...
Yes, we're very careful about sorting - except for ferrous metals which
at the moment aren't bringing a huge amount. Copper, brasses and lead are
valuable. We have a separate bucket for each, Spouse takes them down
every few months. The ferrous stuff goes more or less to get it out of
the way.


I've never bothered with getting money for steel scrap. By agreement, it
just goes into the scrap skip at a neighbouring factory. However, there
appears to be enough money in it at the moment to make it worth while for
people to pay our industrial estate for every dumped car removed. A few
years ago we had to pay to have them collected.


We don't have any local factories, we wouldn't make a special journey (the
scrap yard's a mile away for goodness' sake!) but when we have enough other
stuff the ferrous stuff goes along.

We have a very good relationship with our scrap yard, we've been dealing
with them through four generations - theirs, not ours. For instance, when we
want copper sheet they often 'sell' us a hw cylinder.

Mary




Mary Fisher April 18th 07 10:07 AM

Sell your scrap copper.
 

wrote in message
oups.com...

i have a decent amount of lead ... where would i take it?

Look in your Yellow Pages for metal scrap merchants.

Mary



Mary Fisher April 18th 07 10:09 AM

Sell your scrap copper.
 

"Owain" wrote in message
...
Tim Lamb wrote:
I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)


I'd live a 60' long Nissen hut (even better three of them).


Wouldn't there be six from three silos?

I don't think it'll fit inside a 24' flat though. :-(


Put the flat in the hut.

Mary

Owain




Mary Fisher April 18th 07 10:10 AM

Sell your scrap copper.
 

"Tim Lamb" wrote in message
...

....

Now anyone got a use for lots of 6mm stainless nuts, bolts and washers?


It's heartbreakiing, isn't it!

Mary

regards
--
Tim Lamb




Dave Fawthrop April 18th 07 11:15 AM

Sell your scrap copper.
 
On Wed, 18 Apr 2007 09:28:52 +0100, Tim Lamb
wrote:


|!Now anyone got a use for lots of 6mm stainless nuts, bolts and washers?

Try your local scrap yard, Stainless steel gets better prices than any old
iron, which I take to the local tip^h^h^hrecycleing centre
--
Dave Fawthrop sf hyphenologist.co.uk 165 *Free* SF ebooks.
165 Sci Fi books on CDROM, from Project Gutenberg
http://www.gutenberg.org/wiki/Main_Page Completely Free to any
address in the UK. Contact me on the *above* email address.


Bob Eager April 18th 07 08:25 PM

Sell your scrap copper.
 
On Wed, 18 Apr 2007 11:50:52 UTC, Owain
wrote:

Mary Fisher wrote:
I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)
I'd live a 60' long Nissen hut (even better three of them).

Wouldn't there be six from three silos?


I suppose there would, unless one has tubular Nissen huts semirecessed
into the ground.


That would be the basements.

--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
http://www.diybanter.com

Tim Lamb April 18th 07 10:57 PM

Sell your scrap copper.
 
In message , Bob Eager
writes
On Wed, 18 Apr 2007 11:50:52 UTC, Owain
wrote:

Mary Fisher wrote:
I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)
I'd live a 60' long Nissen hut (even better three of them).
Wouldn't there be six from three silos?


I suppose there would, unless one has tubular Nissen huts semirecessed
into the ground.


That would be the basements.


:-) At 11' diameter only Mary would be able to stand upright.

There was a flicker of interest from a local who claims to have a WW11
communications aircraft rotting in his garden.

I think the scrap route is best. At roughly 8' long and 2'6" wide a
stack of sections will more or less fit in the pick-up.

regards


--
Tim Lamb

Mary Fisher April 19th 07 10:29 AM

Sell your scrap copper.
 

"Owain" wrote in message
...
Mary Fisher wrote:
I just happen to have three redundant grain silos. Or, perhaps someone
would like a 60' long Nissen hut:-)
I'd live a 60' long Nissen hut (even better three of them).

Wouldn't there be six from three silos?


I suppose there would, unless one has tubular Nissen huts semirecessed
into the ground.

I don't think it'll fit inside a 24' flat though. :-(

Put the flat in the hut.


Her in the upstairs flat might object if her floor suddenly descended 9'.


:-)

Mary



Mary Fisher April 19th 07 10:30 AM

Sell your scrap copper.
 

"Tim Lamb" wrote in message
...
In message , Bob Eager
writes
On Wed, 18 Apr 2007 11:50:52 UTC, Owain
wrote:

Mary Fisher wrote:
I just happen to have three redundant grain silos. Or, perhaps
someone
would like a 60' long Nissen hut:-)
I'd live a 60' long Nissen hut (even better three of them).
Wouldn't there be six from three silos?

I suppose there would, unless one has tubular Nissen huts semirecessed
into the ground.


That would be the basements.


:-) At 11' diameter only Mary would be able to stand upright.


Shhh - not eveyone knows how stumpy I am!

Mary



Alan Holmes June 18th 07 06:45 PM

Sell your scrap copper.
 

"Dave Fawthrop" wrote in message
...
I have been throwing my scrap copper and brass into a pile for some years
intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade took
it in for me, but still GBP70 is a loot.


Not only copper, but aluminium as well, and lead if you have any.



Alan Holmes June 18th 07 06:50 PM

Sell your scrap copper.
 

"Mary Fisher" wrote in message
t...

"nightjar .uk.com" nightjar@insert my surname here wrote in message
...

"Dave Fawthrop" wrote in message
...
I have been throwing my scrap copper and brass into a pile for some years
intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade
took
it in for me, but still GBP70 is a loot.


That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass
pieces.

Colin Bignell


Yes, we're very careful about sorting - except for ferrous metals which at
the moment aren't bringing a huge amount. Copper, brasses and lead are
valuable. We have a separate bucket for each, Spouse takes them down every
few months. The ferrous stuff goes more or less to get it out of the way.


I usually take the ferrous stuff to the scrap merchant at the same time and
just leave it as a present!



[email protected] June 18th 07 08:23 PM

Sell your scrap copper.
 
On Mon, 18 Jun 2007 17:50:29 GMT, "Alan Holmes"
wrote:


"Mary Fisher" wrote in message
et...

"nightjar .uk.com" nightjar@insert my surname here wrote in message
...

"Dave Fawthrop" wrote in message
...
I have been throwing my scrap copper and brass into a pile for some years
intending to take it to a scrap merchant sometime.

I got GPB 70 for a 32 kg of rubbish.
I probably got a good price because my neighbour who was in the trade
took
it in for me, but still GBP70 is a loot.

That sounds as though you either didn't have a lot of copper or didn't
separate it out.. Copper by itself should fetch around £2.80 - £3.00 / kg
this week. £2.20 / kg is about right for brass swarf or heavy brass
pieces.

Colin Bignell


Yes, we're very careful about sorting - except for ferrous metals which at
the moment aren't bringing a huge amount. Copper, brasses and lead are
valuable. We have a separate bucket for each, Spouse takes them down every
few months. The ferrous stuff goes more or less to get it out of the way.


I usually take the ferrous stuff to the scrap merchant at the same time and
just leave it as a present!

Old pieces of Twin&Earth etc fetched 90p per kg.
Using a scrap merchant for all one's old metal is a good way of
recycling and getting paid for it. Better than it going in landfill.
Robert

Alan Holmes June 19th 07 12:01 AM

Sell your scrap copper.
 

"Mary Fisher" wrote in message
t...

"Tim Lamb" wrote in message
...

...

Now anyone got a use for lots of 6mm stainless nuts, bolts and washers?


I have a load of 6BA nuts and bolts!



Dave Plowman (News) June 19th 07 01:48 AM

Sell your scrap copper.
 
In article ,
Alan Holmes wrote:
Now anyone got a use for lots of 6mm stainless nuts, bolts and
washers?


I have a load of 6BA nuts and bolts!


How much do you want for them?

--
*Work like you don't need the money. Love like you've never been hurt.

Dave Plowman London SW
To e-mail, change noise into sound.


All times are GMT +1. The time now is 03:23 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter