DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Polycell wallpaper paste (https://www.diybanter.com/uk-diy/195093-polycell-wallpaper-paste.html)

Dave March 15th 07 04:23 PM

Polycell wallpaper paste
 
What has happened to Polycell wallpaper paste? I have been in 8 shops
this afternoon and not a one stocks it, unless it is in the 8 roll bags
(and only a Dulux centre had that in). What I want is the smaller 5 roll
bags in a box.

Dave

Mathew Newton March 15th 07 08:57 PM

Polycell wallpaper paste
 
On Mar 15, 4:23 pm, Dave wrote:
What has happened to Polycell wallpaper paste? I have been in 8 shops
this afternoon and not a one stocks it, unless it is in the 8 roll bags
(and only a Dulux centre had that in). What I want is the smaller 5 roll
bags in a box.

Dave


Can't you just use another brand? As far as I'm aware it's all the
same stuff...

Most of the boxed ones are individually bagged inside if you're
wanting to minimise wastage (e.g. http://www.toolstation.com/search.html?searchstr=19709
is the last stuff I used thought note the picture is of the 10 roll
bag. The 30 roll box has 6 bags in it).

Athough given you're only looking at ~£3 for 30 rolls worth there's
really no worry about chucking unused stuff away.

Mathew


Dave Fawthrop March 16th 07 07:27 AM

Polycell wallpaper paste
 
On 15 Mar 2007 13:57:36 -0700, "Mathew Newton"
wrote:

|!On Mar 15, 4:23 pm, Dave wrote:
|! What has happened to Polycell wallpaper paste? I have been in 8 shops
|! this afternoon and not a one stocks it, unless it is in the 8 roll bags
|! (and only a Dulux centre had that in). What I want is the smaller 5 roll
|! bags in a box.
|!
|! Dave
|!
|!Can't you just use another brand? As far as I'm aware it's all the
|!same stuff...

Made in the same factory, and shipped in different coloured boxes/bags.
--
Dave Fawthrop sf hyphenologist.co.uk 165 *Free* SF ebooks.
165 Sci Fi books on CDROM, from Project Gutenberg
http://www.gutenberg.org/wiki/Main_Page Completely Free to any
address in the UK. Contact me on the *above* email address.


Stuart Noble March 16th 07 11:50 AM

Polycell wallpaper paste
 
Dave Fawthrop wrote:
On 15 Mar 2007 13:57:36 -0700, "Mathew Newton"
wrote:

|!On Mar 15, 4:23 pm, Dave wrote:
|! What has happened to Polycell wallpaper paste? I have been in 8 shops
|! this afternoon and not a one stocks it, unless it is in the 8 roll bags
|! (and only a Dulux centre had that in). What I want is the smaller 5 roll
|! bags in a box.
|!
|! Dave
|!
|!Can't you just use another brand? As far as I'm aware it's all the
|!same stuff...

Made in the same factory, and shipped in different coloured boxes/bags.


Except only Solvite can fix a man to the underside of a plane. I wonder
what would have happened to him if it had rained

Dave March 16th 07 05:43 PM

Polycell wallpaper paste
 
Dave Fawthrop wrote:
On 15 Mar 2007 13:57:36 -0700, "Mathew Newton"
wrote:

|!On Mar 15, 4:23 pm, Dave wrote:
|! What has happened to Polycell wallpaper paste? I have been in 8 shops
|! this afternoon and not a one stocks it, unless it is in the 8 roll bags
|! (and only a Dulux centre had that in). What I want is the smaller 5 roll
|! bags in a box.
|!
|! Dave
|!
|!Can't you just use another brand? As far as I'm aware it's all the
|!same stuff...

Made in the same factory, and shipped in different coloured boxes/bags.


In the end I did buy another brand. Its called Beeline and is made in
Belfast. It was recommended by a local decorators that is frequented by
trade customers. The woman behind the counter said all the pro's use
that paste.

Many years ago my father in law warned me off Solvite, as he said it can
stain some papers. I ignored him once, to my regret and ended up ripping
all the paper off the walls, so as to start again. Ever since I have
used Polycell, but I just found it strange that 7 out of 8 shops/stores
did not stock it.

On another point, the paper I am hanging, I only get 3 strips out of a
roll. the repeat is 640 mm. (25 1/4 inches) room hight is 2630 mm. (103
1/2 inches) Have the manufacturers made the repeat so much longer to
prevent us from getting 4 strips from a roll, or am I just cynical?


Dave

John March 17th 07 07:51 AM

Polycell wallpaper paste
 

"Dave" wrote in message
...

On another point, the paper I am hanging, I only get 3 strips out of a
roll. the repeat is 640 mm. (25 1/4 inches) room hight is 2630 mm. (103
1/2 inches) Have the manufacturers made the repeat so much longer to
prevent us from getting 4 strips from a roll, or am I just cynical?


Use woodchip then, no repeat!! Honestly, some people!

John



John March 17th 07 12:17 PM

Polycell wallpaper paste
 

"Dave" wrote in message
...

On another point, the paper I am hanging, I only get 3 strips out of a
roll. the repeat is 640 mm. (25 1/4 inches) room hight is 2630 mm. (103
1/2 inches) Have the manufacturers made the repeat so much longer to
prevent us from getting 4 strips from a roll, or am I just cynical?


Use woodchip then, no repeat!! Honestly, some people!

John




Dave March 17th 07 10:08 PM

Polycell wallpaper paste
 
John wrote:

"Dave" wrote in message
...


On another point, the paper I am hanging, I only get 3 strips out of a
roll. the repeat is 640 mm. (25 1/4 inches) room hight is 2630 mm. (103
1/2 inches) Have the manufacturers made the repeat so much longer to
prevent us from getting 4 strips from a roll, or am I just cynical?



Use woodchip then, no repeat!! Honestly, some people!


LOL Yes, but my next question will be...

How the hell do I get painted wood chip off my walls?

You do not need to reply to this, as I have a good method of wood chip
removal. :-)

Dave

tester March 18th 07 10:32 PM

Polycell wallpaper paste
 
On Sat, 17 Mar 2007 22:08:59 +0000, Dave
wrote:

John wrote:

"Dave" wrote in message
...


On another point, the paper I am hanging, I only get 3 strips out of a
roll. the repeat is 640 mm. (25 1/4 inches) room hight is 2630 mm. (103
1/2 inches) Have the manufacturers made the repeat so much longer to
prevent us from getting 4 strips from a roll, or am I just cynical?



Use woodchip then, no repeat!! Honestly, some people!


LOL Yes, but my next question will be...

How the hell do I get painted wood chip off my walls?

You do not need to reply to this, as I have a good method of wood chip
removal. :-)

Dave


I have painted wood chip to get off several rooms - be nice to know a
good way of doing it - easy being a good way :)

Dave March 18th 07 11:25 PM

Polycell wallpaper paste
 
tester wrote:

I have painted wood chip to get off several rooms - be nice to know a
good way of doing it - easy being a good way :)


Equipment required.

A cold room (very important that the room is cold and no ventilation,
you have a maximum of 3 weeks to do this, before the weather warms up),
& lots of steam.
A tiger claw (it is a device that has three sets of spiked wheels are
set well out of track, so that they penetrate the paper and make holes,
by tearing through to the back of it.
Lots of steam.
A pinch of washing up detergent.
Lots of steam.
A scraper that has a ground edge something like a wood chisel and lots
of steam. Use the scraper with the bevel to the wall. With lots of steam.

Go over all the wood chip with the tiger claw a few times.
Raise the humidity in the room by using as much steam as you can.
Kettles, pans of hot water,steamers, or anything that will emit steam
will do (keep all doors and windows closed and do not allow anyone to
enter or leave).

Before you feel yourself being affected by the humidity, go over the
walls with a solution of water and washing up liquid. Wait until you
feel that you are in the tropics and then start to strip off the paper.
Provided you have left enough paths through the paper using the tiger
claw, you should now be stripping paper off the walls as if it was
normal paper.


The tiger claw makes the path for the water to get to the adhesive.
The water with the washing up detergent assists the steam/moisture to
penetrate the paper if there is anything that might repel the water (eg
smoke, grease etc)

The humidity wets the walls.

Last time I tried this, I was amazed at how quickly the painted wood
chip came off the walls. A tropical room is the answer.

Dave



Mathew Newton March 19th 07 09:04 AM

Polycell wallpaper paste
 
On Mar 18, 11:25 pm, Dave wrote:
tester wrote:
I have painted wood chip to get off several rooms - be nice to know a
good way of doing it - easy being a good way :)


Equipment required.

A cold room (very important that the room is cold and no ventilation,
you have a maximum of 3 weeks to do this, before the weather warms up),
& lots of steam.
A tiger claw (it is a device that has three sets of spiked wheels are
set well out of track, so that they penetrate the paper and make holes,
by tearing through to the back of it.
Lots of steam.
A pinch of washing up detergent.
Lots of steam.
A scraper that has a ground edge something like a wood chisel and lots
of steam. Use the scraper with the bevel to the wall. With lots of steam.

Go over all the wood chip with the tiger claw a few times.
Raise the humidity in the room by using as much steam as you can.
Kettles, pans of hot water,steamers, or anything that will emit steam
will do (keep all doors and windows closed and do not allow anyone to
enter or leave).

Before you feel yourself being affected by the humidity, go over the
walls with a solution of water and washing up liquid. Wait until you
feel that you are in the tropics and then start to strip off the paper.
Provided you have left enough paths through the paper using the tiger
claw, you should now be stripping paper off the walls as if it was
normal paper.

The tiger claw makes the path for the water to get to the adhesive.
The water with the washing up detergent assists the steam/moisture to
penetrate the paper if there is anything that might repel the water (eg
smoke, grease etc)

The humidity wets the walls.

Last time I tried this, I was amazed at how quickly the painted wood
chip came off the walls. A tropical room is the answer.

Dave



I think you're making meal of it to be honest. I've never had any
trouble with just a standard wallpaper steamer - at any time of year -
with the optional use of the tiger claw.

I usually find woodchip comes off in sheets making it a doddle to
remove - the backing that's left behind practically falls off with the
use of the steamer.

Mathew


tester March 19th 07 09:18 AM

Polycell wallpaper paste
 
On Sun, 18 Mar 2007 23:25:08 +0000, Dave
wrote:

tester wrote:

I have painted wood chip to get off several rooms - be nice to know a
good way of doing it - easy being a good way :)


Equipment required.

A cold room (very important that the room is cold and no ventilation,
you have a maximum of 3 weeks to do this, before the weather warms up),
& lots of steam.
A tiger claw (it is a device that has three sets of spiked wheels are
set well out of track, so that they penetrate the paper and make holes,
by tearing through to the back of it.
Lots of steam.
A pinch of washing up detergent.
Lots of steam.
A scraper that has a ground edge something like a wood chisel and lots
of steam. Use the scraper with the bevel to the wall. With lots of steam.

Go over all the wood chip with the tiger claw a few times.
Raise the humidity in the room by using as much steam as you can.
Kettles, pans of hot water,steamers, or anything that will emit steam
will do (keep all doors and windows closed and do not allow anyone to
enter or leave).

Before you feel yourself being affected by the humidity, go over the
walls with a solution of water and washing up liquid. Wait until you
feel that you are in the tropics and then start to strip off the paper.
Provided you have left enough paths through the paper using the tiger
claw, you should now be stripping paper off the walls as if it was
normal paper.


The tiger claw makes the path for the water to get to the adhesive.
The water with the washing up detergent assists the steam/moisture to
penetrate the paper if there is anything that might repel the water (eg
smoke, grease etc)

The humidity wets the walls.

Last time I tried this, I was amazed at how quickly the painted wood
chip came off the walls. A tropical room is the answer.

Dave


Thanks - one thing I apprciate is what paint over any wallpaper does -
makes it a b***h to get off easily.

Stuart Noble March 19th 07 11:29 AM

Polycell wallpaper paste
 
Mathew Newton wrote:
On Mar 18, 11:25 pm, Dave wrote:
tester wrote:
I have painted wood chip to get off several rooms - be nice to know a
good way of doing it - easy being a good way :)

Equipment required.

A cold room (very important that the room is cold and no ventilation,
you have a maximum of 3 weeks to do this, before the weather warms up),
& lots of steam.
A tiger claw (it is a device that has three sets of spiked wheels are
set well out of track, so that they penetrate the paper and make holes,
by tearing through to the back of it.
Lots of steam.
A pinch of washing up detergent.
Lots of steam.
A scraper that has a ground edge something like a wood chisel and lots
of steam. Use the scraper with the bevel to the wall. With lots of steam.

Go over all the wood chip with the tiger claw a few times.
Raise the humidity in the room by using as much steam as you can.
Kettles, pans of hot water,steamers, or anything that will emit steam
will do (keep all doors and windows closed and do not allow anyone to
enter or leave).

Before you feel yourself being affected by the humidity, go over the
walls with a solution of water and washing up liquid. Wait until you
feel that you are in the tropics and then start to strip off the paper.
Provided you have left enough paths through the paper using the tiger
claw, you should now be stripping paper off the walls as if it was
normal paper.

The tiger claw makes the path for the water to get to the adhesive.
The water with the washing up detergent assists the steam/moisture to
penetrate the paper if there is anything that might repel the water (eg
smoke, grease etc)

The humidity wets the walls.

Last time I tried this, I was amazed at how quickly the painted wood
chip came off the walls. A tropical room is the answer.

Dave



I think you're making meal of it to be honest. I've never had any
trouble with just a standard wallpaper steamer - at any time of year -
with the optional use of the tiger claw.

I usually find woodchip comes off in sheets making it a doddle to
remove - the backing that's left behind practically falls off with the
use of the steamer.

Mathew

I agree. I don't even bother with the steamer most of the time.
Wallpaper is very rarely that well stuck all over and, once you've got a
few bits off, water soon gets behind the rest.
What I do find essential is a "heavy duty scraper", mainly because the
sharp blade leaves you with a clean surface and slices off bits of old
filler etc


All times are GMT +1. The time now is 12:41 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter