Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

Yaz

On Thu, 08 Mar 2007 09:51:19 GMT, "Yaz"
wrote:

Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

Yaz


Haven't seen it and can't say I've ever felt the need for it in tubes.
It's easy enough to just mix up whatever amount you need .

...I presume you mean the sort of cartridges you use in a sealant
gun... I'd guess there would be issues about it going off "in the
tube" between uses .

As for securing the boxes are you not screwing them to whatever is
behind .

On Thu, 08 Mar 2007 09:51:19 +0000, Yaz wrote:

Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

This is a DIY group!

Take one empty sealant cartridge (e.g. silicone, solvent free adhesive)
remove the plunger and clean out. Fill with one-coat plaster. Replace
plunger. Apply.

And here's one we made earlier ... :-)

On 8 Mar, 11:17, John Stumbles wrote:
On Thu, 08 Mar 2007 09:51:19 +0000, Yaz wrote:
Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

This is a DIY group!

Take one empty sealant cartridge (e.g. silicone, solvent free adhesive)
remove the plunger and clean out. Fill with one-coat plaster. Replace
plunger. Apply.

And here's one we made earlier ... :-)

or if too lazy, just use a decorators filler cartridge. Same
difference.


NT

In message , John Stumbles
writes
Take one empty sealant cartridge (e.g. silicone, solvent free adhesive)
remove the plunger and clean out. Fill with one-coat plaster. Replace
plunger. Apply.

Decorators caulk?

--
Clive Mitchell
http://www.bigclive.com

"John Stumbles" wrote in message
news
On Thu, 08 Mar 2007 09:51:19 +0000, Yaz wrote:

Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

This is a DIY group!

Take one empty sealant cartridge (e.g. silicone, solvent free adhesive)
remove the plunger and clean out.

How does one do that, I know the Durgun (Sp?) can be used to remove the
plungers but how can it be done with 'normal' tools etc?

Cheers

John

On Thu, 08 Mar 2007 14:34:27 +0000, John wrote:

How does one do that, I know the Durgun (Sp?) can be used to remove the
plungers but how can it be done with 'normal' tools etc?

just push the plunger back with a bit of rod or dowel

John Stumbles wrote:
On Thu, 08 Mar 2007 14:34:27 +0000, John wrote:

How does one do that, I know the Durgun (Sp?) can be used to remove the
plungers but how can it be done with 'normal' tools etc?

just push the plunger back with a bit of rod or dowel


I don't think plaster in a cartridge would work, any more than it does
with mortar. Cartridge products have a uniform consistency, usually
based on an acrylic resin.

"Stuart Noble" wrote in message
...
John Stumbles wrote:
On Thu, 08 Mar 2007 14:34:27 +0000, John wrote:

How does one do that, I know the Durgun (Sp?) can be used to remove the
plungers but how can it be done with 'normal' tools etc?

just push the plunger back with a bit of rod or dowel


I don't think plaster in a cartridge would work, any more than it does
with mortar.

Durgun actually market a 'mortar applicator'. AIUI; it's primarily targeted
at the pointing requirement. The demo's I've seen show the applicator loaded
with mortar and the nozzle formed from a small length of copper (22mm?) tube
squeezed with pliers to the width required.
{ I don't own such a device - merely seen it demonstrated} . I think (or am
at least persuaded by Durgun ] that mortar 'would work'. Your opinion may
differ.

--

Brian

On Fri, 09 Mar 2007 07:58:09 +0000, Stuart Noble wrote:

I don't think plaster in a cartridge would work, any more than it does
with mortar. Cartridge products have a uniform consistency, usually
based on an acrylic resin.

One-coat plaster does, mortar doesn't. I've tried both.

On Thu, 08 Mar 2007 11:17:15 GMT, John Stumbles
wrote:

On Thu, 08 Mar 2007 09:51:19 +0000, Yaz wrote:

Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

This is a DIY group!

Take one empty sealant cartridge (e.g. silicone, solvent free adhesive)
remove the plunger and clean out. Fill with one-coat plaster. Replace
plunger. Apply.

And here's one we made earlier ... :-)


Get down, Shep.



--

..andy

On Fri, 09 Mar 2007 02:10:27 +0000, Andy Hall wrote:

Get down, Shep.

Oh dear! What's that baby elephant done on the studio floor?

On Fri, 09 Mar 2007 11:31:55 GMT, John Stumbles
wrote:

On Fri, 09 Mar 2007 02:10:27 +0000, Andy Hall wrote:

Get down, Shep.

Oh dear! What's that baby elephant done on the studio floor?

Valerie?


--

..andy

In message , Andy Hall
writes
On Fri, 09 Mar 2007 11:31:55 GMT, John Stumbles
wrote:

On Fri, 09 Mar 2007 02:10:27 +0000, Andy Hall wrote:

Get down, Shep.

Oh dear! What's that baby elephant done on the studio floor?

Valerie?

It's just a single ton

****, I'm too good

--
geoff

On Thu, 8 Mar 2007 09:51:19 UTC, "Yaz"
wrote:

Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

Polyfilla in a squeezy tube.

--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
http://www.diybanter.com

In an earlier contribution to this discussion,
Bob Eager wrote:

On Thu, 8 Mar 2007 09:51:19 UTC, "Yaz"
wrote:

Can anyone tell me if plaster is available in a filler applicator
type of tube. I need to use same for filling around / securing
electrical socket boxes.

Polyfilla in a squeezy tube.


.. . . or in an icing bag (when SWMBO's not looking!) g
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!

On Mar 8, 9:51 am, "Yaz" wrote:
Can anyone tell me if plaster is available in a filler applicator type of
tube. I need to use same for filling around / securing electrical socket
boxes.

Yaz

I've recently seen PolyFilla in both a big toothpaste sort of tube and
a mastic-gun cartridge, which looked like fun if you find that sort of
thing fun.

I so rarely get round to doing anything DIY (beyond reading this
group) that I find the mix-it-yourself powder more useful than pre-
fixed, and I've got a little rubber mixing pot (made by Taylor) which
is easy to clean out afterwards.

The other essential tool is an ex-kitchen knife (3" Kitchen Devil veg
knife) blunted down a bit, which is both flexible & pointy for getting
the stuff caulked in properly.

Al

Yaz wrote:
Can anyone tell me if plaster is available in a filler applicator
type of tube. I need to use same for filling around / securing
electrical socket boxes.

Solvent free Gripfill. Dries white, takes paint - and the boxes won't ever
come out!


--
Dave
The Medway Handyman
www.medwayhandyman.co.uk
01634 717930
07850 597257

The Medway Handyman wrote:

Solvent free Gripfill. Dries white, takes paint - and the boxes won't ever
come out!

I am a big fan of this stuff, one of the rare occasions where the
solvent free version seem far more useful than the solvent one...


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/