DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   lateral thinking required on re-siting loo (https://www.diybanter.com/uk-diy/189873-lateral-thinking-required-re-siting-loo.html)

Maurice W January 21st 07 06:44 PM

lateral thinking required on re-siting loo
 
Help!

I'm wanting to rejig the back of r rouse, and there's a toilet I want
to keep on the ground floor. The main problem is that the toilet
currently is hooked directly into a hole in the floor which evidently
goes to a drain that hooks up with the sewer, as opposed to
disappearing through the wall into a soil pipe.

The big nuisance is that this hole in the floor in about 12inches from
the back wall, which means the whole toilet is much further into the
small floorspace than would otherwise be the case, which leaves no
room for putting a small handbasin in, other than squeezing it right
into a corner, which would make manouevering to sit on the toilet
awkard.

I spose some digging up of the floor etc could relocate the plumbing,
but I was wondering if there is something I hadn't thought of that
could get around this.

Things like as there's a high level cistern, a sink could be put in
where the normal level cistern is, and it could somehow swing out for
people to wash their hands after sitting on t'karzi. Or a toilet bowl
that somehow has the s-bend out the front of the toilet, so that the
main toilet could push further back against the wall.

Mozzer

John Stumbles January 21st 07 07:03 PM

lateral thinking required on re-siting loo
 
On Sun, 21 Jan 2007 18:44:00 +0000, Maurice W wrote:

Help!

I'm wanting to rejig the back of r rouse, and there's a toilet I want
to keep on the ground floor. The main problem is that the toilet
currently is hooked directly into a hole in the floor which evidently
goes to a drain that hooks up with the sewer, as opposed to
disappearing through the wall into a soil pipe.

The big nuisance is that this hole in the floor in about 12inches from
the back wall, which means the whole toilet is much further into the
small floorspace than would otherwise be the case, which leaves no
room for putting a small handbasin in, other than squeezing it right
into a corner, which would make manouevering to sit on the toilet
awkard.

I spose some digging up of the floor etc could relocate the plumbing,
but I was wondering if there is something I hadn't thought of that
could get around this.


I think the traditional French pan has a hole in the centre rather than
towards the back, and it's supposed to be so much healthier squatting.

Bob Minchin January 21st 07 08:15 PM

lateral thinking required on re-siting loo
 

"John Stumbles" wrote in message
.. .
On Sun, 21 Jan 2007 18:44:00 +0000, Maurice W wrote:

Help!

I'm wanting to rejig the back of r rouse, and there's a toilet I want
to keep on the ground floor. The main problem is that the toilet
currently is hooked directly into a hole in the floor which evidently
goes to a drain that hooks up with the sewer, as opposed to
disappearing through the wall into a soil pipe.

The big nuisance is that this hole in the floor in about 12inches from
the back wall, which means the whole toilet is much further into the
small floorspace than would otherwise be the case, which leaves no
room for putting a small handbasin in, other than squeezing it right
into a corner, which would make manouevering to sit on the toilet
awkard.

I spose some digging up of the floor etc could relocate the plumbing,
but I was wondering if there is something I hadn't thought of that
could get around this.


I think the traditional French pan has a hole in the centre rather than
towards the back, and it's supposed to be so much healthier squatting.


Have you the room the move it sideways and back and then use a combination
of multiquicks in series to connect to the hole in the floor?
i.e. move it 'laterally'!!
Bob



Nick H January 21st 07 10:50 PM

lateral thinking required on re-siting loo
 

Maurice W Wrote:
Help!

I'm wanting to rejig the back of r rouse, and there's a toilet I want
to keep on the ground floor. The main problem is that the toilet
currently is hooked directly into a hole in the floor which evidently
goes to a drain that hooks up with the sewer, as opposed to
disappearing through the wall into a soil pipe.

The big nuisance is that this hole in the floor in about 12inches from
the back wall, which means the whole toilet is much further into the
small floorspace than would otherwise be the case, which leaves no
room for putting a small handbasin in, other than squeezing it right
into a corner, which would make manouevering to sit on the toilet
awkard.

I spose some digging up of the floor etc could relocate the plumbing,
but I was wondering if there is something I hadn't thought of that
could get around this.

Things like as there's a high level cistern, a sink could be put in
where the normal level cistern is, and it could somehow swing out for
people to wash their hands after sitting on t'karzi. Or a toilet bowl
that somehow has the s-bend out the front of the toilet, so that the
main toilet could push further back against the wall.

Mozzer


U.S pans have the oulet underneath the pan and sit on a vertical soil
pipe with a wax sealing ring, now where to get an American toilet ?




--
Nick H

Andrew Gabriel January 22nd 07 07:59 AM

lateral thinking required on re-siting loo
 
In article ,
Nick H writes:

U.S pans have the oulet underneath the pan and sit on a vertical soil
pipe with a wax sealing ring, now where to get an American toilet ?


I wonder if you can fit one in the overhead luggage rack?
;-)

--
Andrew Gabriel

Roger Mills January 22nd 07 10:50 AM

lateral thinking required on re-siting loo
 
In an earlier contribution to this discussion,
Andrew Gabriel wrote:

In article ,
Nick H writes:

U.S pans have the oulet underneath the pan and sit on a vertical soil
pipe with a wax sealing ring, now where to get an American toilet ?


I wonder if you can fit one in the overhead luggage rack?
;-)


Wouldn't it be a bit uncomfortable using it up there? g
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!



The Natural Philosopher January 22nd 07 11:37 AM

lateral thinking required on re-siting loo
 
Roger Mills wrote:
In an earlier contribution to this discussion,
Andrew Gabriel wrote:

In article ,
Nick H writes:
U.S pans have the oulet underneath the pan and sit on a vertical soil
pipe with a wax sealing ring, now where to get an American toilet ?

I wonder if you can fit one in the overhead luggage rack?
;-)


Wouldn't it be a bit uncomfortable using it up there? g


Plenty of UK pans go 'straight down'

[email protected] January 22nd 07 11:48 AM

lateral thinking required on re-siting loo
 
Maurice W wrote:

Help!

I'm wanting to rejig the back of r rouse, and there's a toilet I want
to keep on the ground floor. The main problem is that the toilet
currently is hooked directly into a hole in the floor which evidently
goes to a drain that hooks up with the sewer, as opposed to
disappearing through the wall into a soil pipe.

The big nuisance is that this hole in the floor in about 12inches from
the back wall, which means the whole toilet is much further into the
small floorspace than would otherwise be the case, which leaves no
room for putting a small handbasin in, other than squeezing it right
into a corner, which would make manouevering to sit on the toilet
awkard.

I spose some digging up of the floor etc could relocate the plumbing,
but I was wondering if there is something I hadn't thought of that
could get around this.

Things like as there's a high level cistern, a sink could be put in
where the normal level cistern is, and it could somehow swing out for
people to wash their hands after sitting on t'karzi. Or a toilet bowl
that somehow has the s-bend out the front of the toilet, so that the
main toilet could push further back against the wall.

Mozzer


In Japan I believe a combination low level cistern & sink is a standard
item.


NT



All times are GMT +1. The time now is 01:52 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter