viessmann pcb
 

A long story short, basically a house stood empty for 7 years, boiler
installed in loft but never commissioned. Attempted to fire it up and
its coming up with an error code suggesting to change the PCB.
Dillemma's
1. Purchase new board and hope that any long term storage is confined
here.
2. Purchase new boiler and just accept that it is not viable to replace
parts on an uncertain boiler albeit it is unused. The boiler is a top
of the range with weather compensater fitted and is a condensing
boiler.
3. Hope that Raden comes along and says put the PCB on a radiator and
it will sort itself out.

Merry Xmas all and Happy Nre Year.

Legin

viessmann pcb
 

In message . com, legin
writes
A long story short, basically a house stood empty for 7 years, boiler
installed in loft but never commissioned. Attempted to fire it up and
its coming up with an error code suggesting to change the PCB.
Dillemma's
1. Purchase new board and hope that any long term storage is confined
here.
2. Purchase new boiler and just accept that it is not viable to replace
parts on an uncertain boiler albeit it is unused. The boiler is a top
of the range with weather compensater fitted and is a condensing
boiler.
3. Hope that Raden comes along and says put the PCB on a radiator and
it will sort itself out.

Really sorry about this, but I don't know


--
geoff

viessmann pcb
 

raden wrote:
In message . com, legin
writes
A long story short, basically a house stood empty for 7 years, boiler
installed in loft but never commissioned. Attempted to fire it up and
its coming up with an error code suggesting to change the PCB.
Dillemma's
1. Purchase new board and hope that any long term storage is confined
here.
2. Purchase new boiler and just accept that it is not viable to replace
parts on an uncertain boiler albeit it is unused. The boiler is a top
of the range with weather compensater fitted and is a condensing
boiler.
3. Hope that Raden comes along and says put the PCB on a radiator and
it will sort itself out.

Really sorry about this, but I don't know


Well if the PCB is damp, thats a darned good starting point.

In fact I would put fan heaters up in the loft for a few days and then
try it all.

viessmann pcb
 

In message . com, legin
writes
A long story short, basically a house stood empty for 7 years, boiler
installed in loft but never commissioned. Attempted to fire it up and
its coming up with an error code suggesting to change the PCB.
Dillemma's
1. Purchase new board and hope that any long term storage is confined
here.
2. Purchase new boiler and just accept that it is not viable to replace
parts on an uncertain boiler albeit it is unused. The boiler is a top
of the range with weather compensater fitted and is a condensing
boiler.
3. Hope that Raden comes along and says put the PCB on a radiator and
it will sort itself out.

Merry Xmas all and Happy Nre Year.

Legin

Any sign of a backup battery on the PCB (for programmer or similar)?
That would be shot after 7 years off power.

--
steve

viessmann pcb
 

On Sun, 24 Dec 2006 01:31:14 -0800, legin wrote:

A long story short, basically a house stood empty for 7 years, boiler
installed in loft but never commissioned. Attempted to fire it up and
its coming up with an error code suggesting to change the PCB.
Dillemma's
1. Purchase new board and hope that any long term storage is confined
here.
2. Purchase new boiler and just accept that it is not viable to replace
parts on an uncertain boiler albeit it is unused. The boiler is a top
of the range with weather compensater fitted and is a condensing
boiler.
3. Hope that Raden comes along and says put the PCB on a radiator and
it will sort itself out.

Merry Xmas all and Happy Nre Year.

Desperate circumstances.
Try the reset?
See if PCB has battery (which has now discharged?) to hold NV settings?


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html
Gas Fitting Standards Docs he http://www.makewrite.demon.co.uk/GasFittingStandards