Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]() As per the title. I've fitted a heated towel rail (duel fuel) in place of the bathroom radiator. It's quite a tall one, much higher than the previous rad, but it filled up with no problems. I've bled all of the rads, there is still a slight gurgling from the pump but nothing excessive. I've got no heat in any of the downstairs ones - not even slightly warm. All of the upstairs ones are really hot. The water was relatively clean so I don't think anything's sludged up. Have I upset the balance somehow? I've tried turning the towel rail off completely but that makes no difference. Or have I got an airlock? I've drained/refilled the system before and didn't have any airlock problems then. TIA -- /Simon |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Controls on a cental heating towel rail questions | UK diy | |||
Bleeding heated towel rail | UK diy | |||
Heated towel rail valves? | UK diy | |||
towel radiator + timer/thermostat + heating element = right/wrong? | UK diy | |||
Electriclall heated towel rail insert thingy. | UK diy |