Need help to find a part
 

Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far i haven't been able to find anyone who stocks it locally or on the interweb
Any help would be appreciated

Rab

Need help to find a part
 

"scubabob" wrote in message
...

Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far i
haven't been able to find anyone who stocks it locally or on the
interweb
Any help would be appreciated

Rab

Yah didernt look very far then

http://www.johnguest.com/range_spec....UMB&rs=1&id=30

Yes i did or how would i know the part number the problem is that all the suppliers i have gone to either don't know what i'm talking about or just can't be bothered and that's from John guest stockists.
So the question was does anyone know of a dealer who stocks these parts either locally to Edinburgh bearing in mind i have tried most plumming merchants in Edinburgh or a dealer close by or alternativly where i can buy them on the interweb

Rab

Need help to find a part
 

Robbo wrote:
"scubabob" wrote in message
...

Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far i
haven't been able to find anyone who stocks it locally or on the
interweb
Any help would be appreciated

Rab

Yah didernt look very far then

http://www.johnguest.com/range_spec....UMB&rs=1&id=30

Yes but that doesnt tell him where he can buy one. JG only sell through
merchants. If the poster would care to tell me the area where he lives
I will tell him of a possible stockist?

Need help to find a part
 

Not sure if its what you are after, but I have monoblock flexi hose
sets M10 male and 15mm compression. If you want to talk about buying
one set then give me a call.
Calum Sabey
(NewArk Traditional Kitchens 01556 690544)

Need help to find a part
 

On Sat, 18 Nov 2006 22:14:11 +0000, scubabob
wrote:


Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far i
haven't been able to find anyone who stocks it locally or on the
interweb
Any help would be appreciated

Rab

Try www.bes.co.uk
Part No

17840 15 mm x M10 x 30 cm, per PAIR - 8 mm bore £5.10

Need help to find a part
 

Also, if you want to get it locally then go to your local PTS. If they
don't have it in stock then they will have it for you next day.
Calum Sabey
(NewArk Traditional Kitchens 01556 690544)

Need help to find a part
 

On Sun, 19 Nov 2006 09:52:26 +0000, scubabob
wrote:


Robbo Wrote:
"scubabob" wrote in message
...-

Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far
i
haven't been able to find anyone who stocks it locally or on the
interweb
Any help would be appreciated

Rab-

Yah didernt look very far then

http://www.johnguest.com/range_spec....UMB&rs=1&id=30



Yes i did or how would i know the part number the problem is that all
the suppliers i have gone to either don't know what i'm talking about
or just can't be bothered and that's from John guest stockists.
So the question was does anyone know of a dealer who stocks these parts
either locally to Edinburgh bearing in mind i have tried most plumming
merchants in Edinburgh or a dealer close by or alternativly where i can
buy them on the interweb

Rab

I sent you an e-mail and also there is a post below suggesting somewhere on the
'Net

Need help to find a part
 

Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far
i
haven't been able to find anyone who stocks it locally or on the
interweb
Any help would be appreciated

Rab-

Yah didernt look very far then

http://www.johnguest.com/range_spec....UMB&rs=1&id=30



Yes i did or how would i know the part number the problem is that all
the suppliers i have gone to either don't know what i'm talking about
or just can't be bothered and that's from John guest stockists.
So the question was does anyone know of a dealer who stocks these parts
either locally to Edinburgh bearing in mind i have tried most plumming
merchants in Edinburgh or a dealer close by or alternativly where i can
buy them on the interweb

Rab

Well it's not rocket science to find their telephone number from their site,
call them and ask who can supply in your area is it!

Need help to find a part
 

On Sat, 18 Nov 2006 22:14:11 +0000, scubabob wrote:

Can anyone help in tracking down a speedfit part .
The part number is :FLX28 it's a monoblock tap flexihose but so far i
haven't been able to find anyone who stocks it locally or on the
interweb
Any help would be appreciated

Rab

Generally the monoblock flexitails are very similar to each other
(doubtless there are exceptions) but a large number have a 10mm (M10?) or
12mm (M12?) threaded end which goes into the monoblock.

It would be worth finding out if the one you need a spare for is either of
these.

Screwfix have them.




--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html
Gas Fitting Standards Docs he http://www.makewrite.demon.co.uk/GasFittingStandards

Cheers Stuart
It looks as though bes have what i'm looking for
Thanks to everyone else who tried to help
Rab