replacement glass
 

"AJH" wrote in message
...
A pigeon has just crashed into the window beside me and managed to fly
off, the window is broken. It's a 46mm by 88mm pane set in a fixed
metal casement with only 20mm rebate. Before I replace the glass I
thought I'd just ask if there were any point in trying to replace with
a double glazing unit, plainly there's not enough depth for a wide
gapped unit nor for traditional putty fixing. Also I think double
glazed units need to be able to "breathe" so they cannot be set in
putty??

AJH

Twenty+ years ago Magnet Joinery wooden frames used double glazed units
where the inner pane was smaller than the outer so that they fitted into a
standard frame. I've still got one in my utility room - don't know if this
is still possible today though.

Peter

replacement glass
 

On Mon, 23 Oct 2006 16:19:35 GMT Peter Andrews wrote :
A pigeon has just crashed into the window beside me and managed to fly
off, the window is broken. It's a 46mm by 88mm pane set in a fixed
metal casement with only 20mm rebate.

To the OP: 46mm x 88mm ??? Do you mean cm?

Twenty+ years ago Magnet Joinery wooden frames used double glazed units
where the inner pane was smaller than the outer so that they fitted into a
standard frame. I've still got one in my utility room - don't know if this
is still possible today though.

They're called "stepped units" and a Google suggests that they are still
available. Wouldn't work in a metal frame though - the larger pane goes on the
outside and the spacer and smaller pane are on the room side.

--
Tony Bryer SDA UK 'Software to build on' http://www.sda.co.uk