LED kitchen lighting
 

I have been thinking of replacing my fluorescent light (4ft) my first
thought was
halagen lighting about 4 bulbs should do, but I rather like the idea of the
LED
units you can now get. But on observing them lit up in stiores they don't
seem anywhere near as bright as halgen or the old Fl. tube and even not as
bright as standard bulb.

Anyone have any thoughts on this.

LED kitchen lighting
 

whisky-dave wrote:
I have been thinking of replacing my fluorescent light (4ft) my first
thought was
halagen lighting about 4 bulbs should do, but I rather like the idea of the
LED
units you can now get. But on observing them lit up in stiores they don't
seem anywhere near as bright as halgen or the old Fl. tube and even not as
bright as standard bulb.

Anyone have any thoughts on this.



I looked at em but they don;t have the total power without using a lot -
then its expensive.


If totally sexy appearance is not an issue, in a kitchen I'd go for
ceiling mount luminaires with CFL bulbs.

LED kitchen lighting
 

On Mon, 2 Oct 2006 16:52:40 +0100, "whisky-dave"
wrote:

|
|I have been thinking of replacing my fluorescent light (4ft) my first
|thought was
|halagen lighting about 4 bulbs should do, but I rather like the idea of the
|LED
|units you can now get. But on observing them lit up in stiores they don't
|seem anywhere near as bright as halgen or the old Fl. tube and even not as
|bright as standard bulb.
|
|Anyone have any thoughts on this.

Wait another year or three, they will improve.

Kitchens need lots of light, especially if your knives are as sharp as
mine.
--
Dave Fawthrop dave hyphenologist co uk Google Groups is IME the *worst*
method of accessing usenet. GG subscribers would be well advised get a
newsreader, say Agent, and a newsserver, say news.individual.net. These
will allow them: to see only *new* posts, a killfile, and other goodies.

LED kitchen lighting
 

Anyone have any thoughts on this.

One LED - the Kingbright type - will only give about 0.25 watts tops
(if my calculator is true). To get some good light, you would need a
few hundred LEDs, in clusters. Remembering that they are quite
efficient, albeit directional - so ambient light will have to be
sacrificed.

LED kitchen lighting
 

Ren wrote:
Anyone have any thoughts on this.

One LED - the Kingbright type - will only give about 0.25 watts tops

What does that mean? The same as a .25w bulb? draws .25W? a 100W bulb
only 'gives' about a watt of light...

LEDS at 10% eff at - say 250mW input are then 25mW output..so 40
LEDS=100W light bulb?



(if my calculator is true). To get some good light, you would need a
few hundred LEDs, in clusters. Remembering that they are quite
efficient, albeit directional - so ambient light will have to be
sacrificed.

LED kitchen lighting
 

(if my calculator is true).

Blasted calculator - it lied to me again - and to the Tax man - it's
now in the bin.

Joking aside, LED's are designed for 'point' indication, and are not
good for ambient light generation.

LED kitchen lighting
 

In article . com,
Ren wrote:
Joking aside, LED's are designed for 'point' indication, and are not
good for ambient light generation.

That's purely down to the built in lens rather than any intrinsic part of
the design. Different angles are available - although of course it's
unlikely there will ever be an omnidirectional type like a normal bulb.
But several in the same unit could give the same effect.

--
*If a thing is worth doing, wouldn't it have been done already?

Dave Plowman London SW
To e-mail, change noise into sound.

LED kitchen lighting
 

"Ren" wrote in message
ups.com...

(if my calculator is true).

Blasted calculator - it lied to me again - and to the Tax man - it's
now in the bin.

Joking aside, LED's are designed for 'point' indication, and are not
good for ambient light generation.

I've tried a few white LEDs on the 'bench' and they don't really emit white
light,
more of a monochomatic effect. I found it a bit strange that there were so
many LED lights in homebase that lokoed good but on close inspection
provided very little light. Standing near them I could look directly at the
source
without blinking I couldn't do that with the more common and Halgen or
other forms of lighting. I was just trying to imagine how much light an 4 or
6 way
LED system would provide, didn't fancy the idea of buying a ~£40+ unit
to find I'm still in the dark. :)

cheers for the advice, even with a faulty calculator ;-)