Thomas T leaking.
 

My outside loo has a genuine cast iron high level Thomas T and original
Victorian two piece pan.

However, the internals of the Thomas T were replaced with a modern
version before I bought the house. And the down pipe is plastic. Looks ok
at a casual glance though, and works fine.

The coupling between the down pipe and the pan is a sort of shaped rubber
boot, and this has perished and is leaking. Any idea where to get a
replacement - or would some form of gunge work as well?

--
*We are born naked, wet, and hungry. Then things get worse.

Dave Plowman London SW
To e-mail, change noise into sound.

Thomas T leaking.
 

"Dave Plowman (News)" wrote in message
...
My outside loo has a genuine cast iron high level Thomas T and original
Victorian two piece pan.

However, the internals of the Thomas T were replaced with a modern
version before I bought the house. And the down pipe is plastic. Looks ok
at a casual glance though, and works fine.

The coupling between the down pipe and the pan is a sort of shaped rubber
boot, and this has perished and is leaking. Any idea where to get a
replacement - or would some form of gunge work as well?

Any god plumbers or B & Q Warehouse

Thomas T leaking.
 

In article ,
Mr Alun Davies wrote:
The coupling between the down pipe and the pan is a sort of shaped
rubber boot, and this has perished and is leaking. Any idea where to
get a replacement - or would some form of gunge work as well?

Any god plumbers or B & Q Warehouse

I've tried my local Travis Perkins and large B&Q. This is an external
rubber boot - rather like the type that covers the universal joint on a
FWD car driveshaft.

--
*Atheism is a non-prophet organization.

Dave Plowman London SW
To e-mail, change noise into sound.

Thomas T leaking.
 

"Dave Plowman (News)" wrote in message
...
In article ,
Mr Alun Davies wrote:
The coupling between the down pipe and the pan is a sort of shaped
rubber boot, and this has perished and is leaking. Any idea where to
get a replacement - or would some form of gunge work as well?

Any god plumbers or B & Q Warehouse

I've tried my local Travis Perkins and large B&Q. This is an external
rubber boot - rather like the type that covers the universal joint on a
FWD car driveshaft.

We have one too - the original 1930s type. I'm always amazed that it hasn't
leaked but I'd like to know how to replace it when it does.

The other day I broke the cistern lid into two pieces :-( Spouse mended it
and while we don't want to replace the lot we realise that one day, if we
live that long, we'll have to.

sigh

Mary

Thomas T leaking.
 

Dave Plowman (News) wrote:
My outside loo has a genuine cast iron high level Thomas T and original
Victorian two piece pan.

However, the internals of the Thomas T were replaced with a modern
version before I bought the house. And the down pipe is plastic. Looks ok
at a casual glance though, and works fine.

The coupling between the down pipe and the pan is a sort of shaped rubber
boot, and this has perished and is leaking. Any idea where to get a
replacement - or would some form of gunge work as well?


I know what you mean. We used to use them when I was a young Plumber **
years ago. We used to roll them back like a condom on the flush pipe
side fill them with putty and pull them forward over the pan inlet. We
then used to use wire to hold them in place by wrapping wire round each
side and then twisting with pliers.

Bloody crude I know but in those days that was the way things were.

Have not seen one for years.

Thomas T leaking.
 

"Bookworm" wrote in message
ups.com...
Dave Plowman (News) wrote:
My outside loo has a genuine cast iron high level Thomas T and original
Victorian two piece pan.

However, the internals of the Thomas T were replaced with a modern
version before I bought the house. And the down pipe is plastic. Looks ok
at a casual glance though, and works fine.

The coupling between the down pipe and the pan is a sort of shaped rubber
boot, and this has perished and is leaking. Any idea where to get a
replacement - or would some form of gunge work as well?


I know what you mean. We used to use them when I was a young Plumber **
years ago. We used to roll them back like a condom on the flush pipe
side fill them with putty and pull them forward over the pan inlet. We
then used to use wire to hold them in place by wrapping wire round each
side and then twisting with pliers.

That's interesting. Ours isn't wired on though. Of course, any wiring might
be hidden by the accumulation of dust, I can never get it clean.

Did you forget to explain the asterisks?

Mary

Thomas T leaking.
 

In article . com,
Bookworm wrote:
I know what you mean. We used to use them when I was a young Plumber **
years ago. We used to roll them back like a condom on the flush pipe
side fill them with putty and pull them forward over the pan inlet. We
then used to use wire to hold them in place by wrapping wire round each
side and then twisting with pliers.

That's the one - but no putty in my case, just wire.

Bloody crude I know but in those days that was the way things were.

Have not seen one for years.

Oh dear. ;-)

--
*Keep honking...I'm reloading.

Dave Plowman London SW
To e-mail, change noise into sound.

Thomas T leaking.
 

On Wed, 12 Jul 2006 20:19:28 +0100, "Dave Plowman (News)"
wrote:

In article . com,
Bookworm wrote:
I know what you mean. We used to use them when I was a young Plumber **
years ago. We used to roll them back like a condom on the flush pipe
side fill them with putty and pull them forward over the pan inlet. We
then used to use wire to hold them in place by wrapping wire round each
side and then twisting with pliers.

That's the one - but no putty in my case, just wire.

Bloody crude I know but in those days that was the way things were.

Have not seen one for years.

Oh dear. ;-)

Some random thoughts...

If the rubber is (sometimes?) filled with putty and (almost?) always
wired, then the rubber thingy itself is probably not providing much of
a seal. The putty (plumber's mate, I guess) is perhaps the key
ingredient?

Maybe with a little bit of ingenuity something else could be used? The
rubber bit from a sink plunger, suitably modified? Very large
heatshrink tubing? Mould one yourself? Or maybe just some silicone
sealant to hold the pipe in place and forget the rubber wotsit?

Or, maybe a trip to a reclamation yard is in order.

How about eBay? I sold a 60 year old cistern, brackets and downpipe -
including the rubber thingy - about a year ago. Mind you, I got £100
so it would be an expensive way to obtain just the piece of rubber!
Tim Hardisty.
Please remove HAT before replying by email.