DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Result - pvc windows fitted - for info (https://www.diybanter.com/uk-diy/164718-result-pvc-windows-fitted-info.html)

tonyjeffs June 5th 06 01:20 PM

Result - pvc windows fitted - for info
 
We had a relatively good company fit our house with PVC windows. So now
we match the rest of the street.

The windows themselves are reasonably well made, though each weld
represents a weakness, and despite what the rep said, I doubt they are
steel reinforced.

The measurements were poor in part. Some of the windows are 2cm too
small. This isn't obvious because the shortfall is camaflauged with a
uPVC strip.

Damaged areas of plaster inside the house are repaired by hiding with
PVC strip. I would have replastered these areas.

The house has small lead covered roofs over the two front bay windows,
separate from the main tiled roof. These are supported at the front by
the windows, and at the back by an original timber joist. They haven't
jacked one of the bay roofs up properly before removal/refitting
windows, and it has dropped a bit at the front, and is now a slightly
sloping roof.

Overview; visitors think they're nice, they look fine, won't let in the
damp, are a lot warmer, but craftsmanship is lacking on close
examination.




Tony


tarquinlinbin June 5th 06 02:05 PM

Result - pvc windows fitted - for info
 
On 5 Jun 2006 05:20:22 -0700, "tonyjeffs"
wrote:

We had a relatively good company fit our house with PVC windows. So now
we match the rest of the street.

The windows themselves are reasonably well made, though each weld
represents a weakness, and despite what the rep said, I doubt they are
steel reinforced.

The measurements were poor in part. Some of the windows are 2cm too
small. This isn't obvious because the shortfall is camaflauged with a
uPVC strip.

Damaged areas of plaster inside the house are repaired by hiding with
PVC strip. I would have replastered these areas.

The house has small lead covered roofs over the two front bay windows,
separate from the main tiled roof. These are supported at the front by
the windows, and at the back by an original timber joist. They haven't
jacked one of the bay roofs up properly before removal/refitting
windows, and it has dropped a bit at the front, and is now a slightly
sloping roof.

Overview; visitors think they're nice, they look fine, won't let in the
damp, are a lot warmer, but craftsmanship is lacking on close
examination.




Tony

Lacking is not the word I'd use, I'd say unacceptable. Many window
co's dont seem to think that they should do plastering/making
good,mainly becuase they can fish out a plastic strip and a gunk gun
and blob it/cover it. This sounds like the typical rubbish job that is
done is the majority of window replacements in this country.Perhaps
you need to go here and read/post

http://www.thewindowman.co.uk/



Remove antispam and add 670 after bra to email

sm_jamieson June 5th 06 02:09 PM

Result - pvc windows fitted - for info
 

tonyjeffs wrote:
We had a relatively good company fit our house with PVC windows. So now
we match the rest of the street.

The windows themselves are reasonably well made, though each weld
represents a weakness, and despite what the rep said, I doubt they are
steel reinforced.

The measurements were poor in part. Some of the windows are 2cm too
small. This isn't obvious because the shortfall is camaflauged with a
uPVC strip.

Does this compromise the insulation spec of the window ?
Did they fill in the gap with foam, in which case it would probably be
OK ?
Simon.


Chris Bacon June 5th 06 02:14 PM

Result - pvc windows fitted - for info
 
tonyjeffs wrote:
The house has small lead covered roofs over the two front bay windows,
separate from the main tiled roof. These are supported at the front by
the windows, and at the back by an original timber joist. They haven't
jacked one of the bay roofs up properly before removal/refitting
windows, and it has dropped a bit at the front, and is now a slightly
sloping roof.


That does not sound very good at all.

Andy Hall June 5th 06 03:55 PM

Result - pvc windows fitted - for info
 
On Mon, 5 Jun 2006 13:20:22 +0100, tonyjeffs wrote
(in article .com):

We had a relatively good company fit our house with PVC windows. So now
we match the rest of the street.


Is that supposed to be a good thing?


The windows themselves are reasonably well made, though each weld
represents a weakness, and despite what the rep said, I doubt they are
steel reinforced.

The measurements were poor in part. Some of the windows are 2cm too
small. This isn't obvious because the shortfall is camaflauged with a
uPVC strip.

Damaged areas of plaster inside the house are repaired by hiding with
PVC strip. I would have replastered these areas.


This is a bodge. They should have measured properly and fitted the correct
size. It sounds as though they just picked the nearest size.



The house has small lead covered roofs over the two front bay windows,
separate from the main tiled roof. These are supported at the front by
the windows, and at the back by an original timber joist. They haven't
jacked one of the bay roofs up properly before removal/refitting
windows, and it has dropped a bit at the front, and is now a slightly
sloping roof.


This is completely unacceptable. They should have done the job properly.


Overview; visitors think they're nice, they look fine, won't let in the
damp, are a lot warmer, but craftsmanship is lacking on close
examination.



Did you pay already? If it was by credit card or any other form of non-cash
payment, now would be a good time to get the company back to do the job
properly or withhold payments and discuss with the credit organisation.




BeeJay June 5th 06 07:42 PM

Result - pvc windows fitted - for info
 
On Mon, 05 Jun 2006 14:05:45 +0100, tarquinlinbin
wrote:

.Perhaps
you need to go here and read/post

http://www.thewindowman.co.uk/


An excellent site, thanks for that.


All times are GMT +1. The time now is 02:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter