Electric Underfloor Heating
 

Am installing a porcelain tiled floor - onto an existing concrete
subfloor. I have decided (after reading the thousands of messages on
the subject!) to install electric underfloor heating mats (on top of
insulation boards). I am well aware of the
economics/advantages/disadvantages particularly in comparison with
water systems. It is a playroom with central heating and the idea is
only to take the edge off the cold tiles.

There are so many different products/suppliers - Devi, WarmUp,
SpeedHeat, Wickes etc etc. Does anyone have comments on good/bad
experiences with individual products?

I am intrigued by a product from Rayotec which appears to use cable
much closer together thereby making the product thinner, and able to
operate at a lower temperature. Any experience of this?

Electric Underfloor Heating
 

"mjb" wrote in message
oups.com...
Am installing a porcelain tiled floor - onto an existing concrete
subfloor. I have decided (after reading the thousands of messages on
the subject!) to install electric underfloor heating mats (on top of
insulation boards). I am well aware of the
economics/advantages/disadvantages particularly in comparison with
water systems. It is a playroom with central heating and the idea is
only to take the edge off the cold tiles.

Fit laminate flooring then as it costs nothing to run.

Electric Underfloor Heating
 

mjb wrote:
Am installing a porcelain tiled floor - onto an existing concrete
subfloor. I have decided (after reading the thousands of messages on
the subject!) to install electric underfloor heating mats (on top of
insulation boards). I am well aware of the
economics/advantages/disadvantages particularly in comparison with
water systems. It is a playroom with central heating and the idea is
only to take the edge off the cold tiles.

There are so many different products/suppliers - Devi, WarmUp,
SpeedHeat, Wickes etc etc. Does anyone have comments on good/bad
experiences with individual products?

I am intrigued by a product from Rayotec which appears to use cable
much closer together thereby making the product thinner, and able to
operate at a lower temperature. Any experience of this?

We did exactly this (porcelain tiles over electric UFH over concrete),
and for exactly the same reason (to take the edge off the tiles). We
used Thermoflex mat from http://www.penguineurope.com/. Very hapy with
the result. No tips really - just use a good adhesive, and go for it.

--
Grunff

Electric Underfloor Heating
 

mjb wrote:
Am installing a porcelain tiled floor - onto an existing concrete
subfloor. I have decided (after reading the thousands of messages on
the subject!) to install electric underfloor heating mats (on top of
insulation boards). I am well aware of the
economics/advantages/disadvantages particularly in comparison with
water systems. It is a playroom with central heating and the idea is
only to take the edge off the cold tiles.

There are so many different products/suppliers - Devi, WarmUp,
SpeedHeat, Wickes etc etc. Does anyone have comments on good/bad
experiences with individual products?

I am intrigued by a product from Rayotec which appears to use cable
much closer together thereby making the product thinner, and able to
operate at a lower temperature. Any experience of this?

We installed electric underfloor heating under the tiles in a kitchen. I
think it was a Warmfloor kit that we used, which is a resistance wire
rather than a mat. This makes it much easier to install if the floor is
an irregular shape, as well as easy to cement the tiles over. It went in
a couple of years ago and works perfectly.