Hansgrohe mixer tap
I've just bought a new basin mixer tap, and I'm a bit confused by the
tap hoses. There are two 10mm 'pipes' at the end, no thread or nut. How do I connect these to my 15mm copper pipes? I'm very new to this plumbing lark, any help appreciated. Andy |
Hansgrohe mixer tap
I've just bought a new basin mixer tap, and I'm a bit confused by the tap
hoses. There are two 10mm 'pipes' at the end, no thread or nut. How do I connect these to my 15mm copper pipes? I'm very new to this plumbing lark, any help appreciated. Witha reducer and a blow torch ? |
Hansgrohe mixer tap
Andy MCR wrote in message ... I've just bought a new basin mixer tap, and I'm a bit confused by the tap hoses. There are two 10mm 'pipes' at the end, no thread or nut. How do I connect these to my 15mm copper pipes? I'm very new to this plumbing lark, any help appreciated. Andy two of these http://www.screwfix.com/app/sfd/sea/...id=JOVDQ1GUS1G 4WCSTHZOSFFY?_dyncharset=UTF-8&q=d14972&pn=1&pd=1&pi=1&cn=1&cd=1&x=9&y=3 http://tinyurl.com/bu4n3 - |
Hansgrohe mixer tap
Mark wrote:
two of these http://www.screwfix.com/app/sfd/sea/...id=JOVDQ1GUS1G 4WCSTHZOSFFY?_dyncharset=UTF-8&q=d14972&pn=1&pd=1&pi=1&cn=1&cd=1&x=9&y=3 http://tinyurl.com/bu4n3 Thank you, I'll give them a go. |
Hansgrohe mixer tap
Andy MCR wrote in message ... Mark wrote: two of these http://tinyurl.com/bu4n3 Thank you, I'll give them a go. plumbers merchants or B&Q also stock them, the screwfix link was just to show you what they looked like. - |
Hansgrohe mixer tap
On Thu, 09 Feb 2006 12:25:50 GMT, "Mark" wrote:
Andy MCR wrote in message ... I've just bought a new basin mixer tap, and I'm a bit confused by the tap hoses. There are two 10mm 'pipes' at the end, no thread or nut. How do I connect these to my 15mm copper pipes? I'm very new to this plumbing lark, any help appreciated. Andy two of these http://www.screwfix.com/app/sfd/sea/...id=JOVDQ1GUS1G 4WCSTHZOSFFY?_dyncharset=UTF-8&q=d14972&pn=1&pd=1&pi=1&cn=1&cd=1&x=9&y=3 http://tinyurl.com/bu4n3 - Or buy a pair of 10mm flexible tails ...to replace the copper Stuart |
Hansgrohe mixer tap
Sorry, I didn't explain this too well at first, I had a look at the
recommendations and I don't think its the right thing. From my mixer tap I have two stainless tails that end in a stainless steel part, about 3cm long and 10mm in diameter. There is a slight lip 1/3 along it, but no thread etc. Looks like it should 'plug' into something. I'll try and photograph them, as my explaination is not too great! Anyone with experience of these, help appreciated. Thanks. Andy Stuart wrote: On Thu, 09 Feb 2006 12:25:50 GMT, "Mark" wrote: I've just bought a new basin mixer tap, and I'm a bit confused by the tap hoses. There are two 10mm 'pipes' at the end, no thread or nut. How do I connect these to my 15mm copper pipes? I'm very new to this plumbing lark, any help appreciated. Andy two of these http://www.screwfix.com/app/sfd/sea/...id=JOVDQ1GUS1G 4WCSTHZOSFFY?_dyncharset=UTF-8&q=d14972&pn=1&pd=1&pi=1&cn=1&cd=1&x=9&y=3 http://tinyurl.com/bu4n3 Or buy a pair of 10mm flexible tails ...to replace the copper Stuart |
All times are GMT +1. The time now is 04:31 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter