Cheap router tables
Has anyone used the Clarke CRT1, as per
http://www.machinemart.co.uk/product.asp?p=060611001 I realise that it is bound to be cheap and nasty, but if it is usable, albeit awkwardly, then it's the right price for my current needs. Essentially, I'm after a table for two or three small jobs, spread over long enough that hiring would either be uneconomic or need more organisation than I can manage. If I then want a decent table, I'm quite happy to either cannibalise this for a homebrew job or write it off/resell and buy a decent one. Obviously though, even at forty quid, it would be nice to know that the Clarke isn't totally unusable before I've taken it out of the box. Regards John |
Cheap router tables
On Sat, 07 Jan 2006 10:33:07 GMT
"david lang" wrote: wrote: Has anyone used the Clarke CRT1, as per http://www.machinemart.co.uk/product.asp?p=060611001 Looks like a clone of the Wolfcraft one I have, which I'm very happy with - it does the job well enough, no bad habits. If you are after el cheapo then Makro had some Nu Tool kits for around £40 including the router, don't know if they still have them. B&Q Warehouse had some cheap combination packages as well. Worth getting a router to leave permanently in the table, it becomes a real pain getting it in and out. Cue Andy Hall to suggest a gold plated £500+ jobby :-) I find that a router with fewer bells and whistles is right for a table. I use a Freud 2000E, as it is 1900Watts, has electronic speed control, the collet winds down to the bottom of the faceplate obviating the temptation to put the cutter in short, and it has a fine height adjuster as standard. As to tables, I made my own, but I used a bit of old worktop with a hole in it for ages. R. |
Cheap router tables
On Sat, 07 Jan 2006 10:33:07 GMT, "david lang"
wrote: wrote: Has anyone used the Clarke CRT1, as per http://www.machinemart.co.uk/product.asp?p=060611001 Looks like a clone of the Wolfcraft one I have, which I'm very happy with - it does the job well enough, no bad habits. If you are after el cheapo then Makro had some Nu Tool kits for around £40 including the router, don't know if they still have them. B&Q Warehouse had some cheap combination packages as well. Worth getting a router to leave permanently in the table, it becomes a real pain getting it in and out. Cue Andy Hall to suggest a gold plated £500+ jobby :-) Dave Au contraire. You should always match tool qualities - so there would be little point in a £500 router and £40 table. Actually, even the Festool is under £400. For a router table, a permanently fitted router makes the most sense, so something with easy tool change and fine height adjustment are the most important criteria, followed by speed adjustment range (low end with torque to cover the larger cutters safely). Therefore, as always, a sensibly specified router in the £150-200 range such as a Freud would be the appropriate choice. -- ..andy |
Cheap router tables
Andy Hall wrote:
On Sat, 07 Jan 2006 10:33:07 GMT, "david lang" wrote: Cue Andy Hall to suggest a gold plated £500+ jobby :-) Au contraire. You should always match tool qualities - so there would be little point in a £500 router and £40 table. Well, I think I've got a decent match here then - £40 table and a twenty quid Homebase router (well, thirty, then in the sale a few years ago ....) For a router table, a permanently fitted router makes the most sense, so something with easy tool change and fine height adjustment are the most important criteria, followed by speed adjustment range (low end with torque to cover the larger cutters safely). Therefore, as always, a sensibly specified router in the £150-200 range such as a Freud would be the appropriate choice. That makes sense, but will have to wait until I grow out of my current setup ... ie when I'm limited by it rather than my own skills ... John |
Cheap router tables
david lang wrote:
Cue Andy Hall to suggest a gold plated ï½£500+ jobby :-) In many cases if you want the best table, make your own. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Cheap router tables
david lang wrote: wrote: Has anyone used the Clarke CRT1, as per http://www.machinemart.co.uk/product.asp?p=060611001 Looks like a clone of the Wolfcraft one I have, which I'm very happy with- it does the job well enough, no bad habits. If you are after el cheapo then Makro had some Nu Tool kits for around £40 including the router, don't know if they still have them. B&Q Warehouse had some cheap combination packages as well. Worth getting a router to leave permanently in the table, it becomes a real pain getting it in and out. Cue Andy Hall to suggest a gold plated £500+ jobby :-) Dave I've used the Nutool for quite a few jobs - quite good enough for me! |
Cheap router tables
david lang wrote: wrote: Has anyone used the Clarke CRT1, as per http://www.machinemart.co.uk/product.asp?p=060611001 Looks like a clone of the Wolfcraft one I have, which I'm very happy with- it does the job well enough, no bad habits. If you are after el cheapo then Makro had some Nu Tool kits for around £40 including the router, don't know if they still have them. B&Q Warehouse had some cheap combination packages as well. Worth getting a router to leave permanently in the table, it becomes a real pain getting it in and out. Cue Andy Hall to suggest a gold plated £500+ jobby :-) Dave |
Cheap router tables
david lang wrote:
wrote: Has anyone used the Clarke CRT1, as per http://www.machinemart.co.uk/product.asp?p=060611001 Looks like a clone of the Wolfcraft one I have, which I'm very happy with - it does the job well enough, no bad habits. Well, it's currently in its box. Will get round to having a play with it soon, and try to remember to report back here. Worth getting a router to leave permanently in the table, it becomes a real pain getting it in and out. Depends how often you're doing it ... John |
Cheap router tables
|
Cheap router tables
Andy Hall wrote: On Sat, 07 Jan 2006 10:33:07 GMT, "david lang" wrote: wrote: Has anyone used the Clarke CRT1, as per http://www.machinemart.co.uk/product.asp?p=060611001 Looks like a clone of the Wolfcraft one I have, which I'm very happy with - it does the job well enough, no bad habits. If you are after el cheapo then Makro had some Nu Tool kits for around £40 including the router, don't know if they still have them. B&Q Warehousehad some cheap combination packages as well. Worth getting a router to leave permanently in the table, it becomes a real pain getting it in and out. Cue Andy Hall to suggest a gold plated £500+ jobby :-) Dave Au contraire. You should always match tool qualities - so there would be little point in a £500 router and £40 table. Actually, even the Festool is under £400. For a router table, a permanently fitted router makes the most sense, so something with easy tool change and fine height adjustment are the most important criteria, followed by speed adjustment range (low end with torque to cover the larger cutters safely). Therefore, as always, a sensibly specified router in the £150-200 range such as a Freud would be the appropriate choice. -- .andy Do people pay £500 for routers? At that price, and if you need a table, you should be looking at a spindle moulder which is a far superior tool in almost every way. cheers Jacob |
All times are GMT +1. The time now is 12:52 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter