DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Follow Ups (https://www.diybanter.com/uk-diy/135561-follow-ups.html)

david lang December 13th 05 10:49 PM

Follow Ups
 
Hi All

So many posts just peter out, never to be seen again. Do you ever
wonder....................................?

Did Mitch ever fix his sink down?

Did Weaver ever burn out his fence post?

Did Gogs ever buy a circular saw?

Did Blair ever drill his tiles?

What happened to Mogweeds walls?

Did Mo ever lay his carpet?

What happened with Egremonts mobile phone?

Did Simon move his washing machine?

Did Dave ever unblock Georges nozzle?

And the one I'm waiting for - did Andy Luckman ever get that drill bit out?

Sad, but I need to know!!!!!

Dave







reg December 13th 05 11:24 PM

Follow Ups
 

"david lang" wrote in message
...
Hi All

So many posts just peter out, never to be seen again. Do you ever
wonder....................................?

Did Mitch ever fix his sink down?

Did Weaver ever burn out his fence post?

Did Gogs ever buy a circular saw?

Did Blair ever drill his tiles?

What happened to Mogweeds walls?

Did Mo ever lay his carpet?

What happened with Egremonts mobile phone?

Did Simon move his washing machine?

Did Dave ever unblock Georges nozzle?

And the one I'm waiting for - did Andy Luckman ever get that drill bit

out?

Sad, but I need to know!!!!!

Dave

your not alone Dave !



Bob Eager December 13th 05 11:39 PM

Follow Ups
 
On Tue, 13 Dec 2005 22:49:22 UTC, "david lang"
wrote:

Hi All

So many posts just peter out, never to be seen again. Do you ever
wonder....................................?


Did the guy with the fence post at the end of his drive, that kept being
knocked down, ever replace it with a lookalike steel one filled with
concrete?

--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
Avenue Supplies, http://avenuesupplies.co.uk

[email protected] December 14th 05 09:34 AM

Follow Ups
 
david lang wrote:
Hi All

So many posts just peter out, never to be seen again. Do you ever
wonder....................................?

Did Mitch ever fix his sink down?

Did Weaver ever burn out his fence post?

Did Gogs ever buy a circular saw?

Did Blair ever drill his tiles?

What happened to Mogweeds walls?

Did Mo ever lay his carpet?

What happened with Egremonts mobile phone?

Did Simon move his washing machine?

Did Dave ever unblock Georges nozzle?

And the one I'm waiting for - did Andy Luckman ever get that drill bit out?

Sad, but I need to know!!!!!

Dave



Given the number of diy injuries per year, chances are all the above
posters are still in hospital from their attempts.

ISTR Andy heated up the drill bit to shatter the stone to pull it out,
and as he pulled, no less than 3.4m of drill bit came out. Apparently
the heat softened it enough for the metal to draw, and the tip only
became free once it had shrunk down to about 2.8mm. He now has a
softened 3.4m 2.8mm bit, which should be useful for drilling through
very very very deep loft insulation to run cables. Thin cables, for
bells. But not much else.


NT


Set Square December 14th 05 09:39 AM

Follow Ups
 
In an earlier contribution to this discussion,
wrote:



Given the number of diy injuries per year, chances are all the above
posters are still in hospital from their attempts.

ISTR Andy heated up the drill bit to shatter the stone to pull it out,
and as he pulled, no less than 3.4m of drill bit came out. Apparently
the heat softened it enough for the metal to draw, and the tip only
became free once it had shrunk down to about 2.8mm. He now has a
softened 3.4m 2.8mm bit, which should be useful for drilling through
very very very deep loft insulation to run cables. Thin cables, for
bells. But not much else.


LOL
--
Cheers,
Set Square
______
Please reply to newsgroup. Reply address is invalid.



Andy Luckman (AJL Electronics) December 14th 05 09:45 AM

Follow Ups
 
In article , david lang
wrote:

And the one I'm waiting for - did Andy Luckman ever get
that drill bit out?


Yep. After I cut a new (different) thread onto the slide hammer stop, the
engineer went back. It was the work of just a couple of minutes to get the
drill out.

So very many thanks for all the suggestions.


--
AJL

Pet @ www.gymratz.co.uk ;¬) December 14th 05 06:30 PM

Follow Ups
 
david lang wrote:

Did Weaver ever burn out his fence post?


I have mailed him to get an answer for you David.
:¬)

--
http://gymratz.co.uk - Best Gym Equipment & Bodybuilding Supplements UK.
http://trade-price-supplements.co.uk - TRADE PRICED SUPPLEMENTS for ALL!
http://fitness-equipment-uk.com - UK's No.1 Fitness Equipment Suppliers.
http://gymratz.co.uk/hot-seat.htm - Live web-cam! (sometimes)


All times are GMT +1. The time now is 02:17 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter