![]() |
Combi Boiler locations
HI All
I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. Cheers Eddie |
Combi Boiler locations
"EddieH" wrote in message oups.com... HI All I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. No problem under stairs. |
Combi Boiler locations
In message .com
"EddieH" wrote: HI All I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. Cheers Eddie Where would the flue & condensate pipes go? -- J.P. Kerslake B.Sc., F.B.I.S. Home "phone"=01248-353264. e-mail (remove NOSPAM) RiscStation Lite+. RiscOS 4.03 boot 1.03. MPro.3.27 DialUp 3.10. SpanStamp 1.02a |
Combi Boiler locations
Doctor Drivel wrote: "EddieH" wrote in message oups.com... HI All I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. No problem under stairs. Thanks so much. I am going to do all the piupework and mount the combi myself, but will then get the plumber in to connect to the gas line. I am grateful that you replied, as I have already started the work. So, no problem if the combi and main gas inlet is in the same location! GREAT NEWS! |
Combi Boiler locations
EddieH wrote: Doctor Drivel wrote: "EddieH" wrote in message oups.com... HI All I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. No problem under stairs. Thanks so much. I am going to do all the piupework and mount the combi myself, but will then get the plumber in to connect to the gas line. I am grateful that you replied, as I have already started the work. So, no problem if the combi and main gas inlet is in the same location! GREAT NEWS! There are plenty of other restrictions on the siting of your new boiler with respect to the flue and the condensate drain (assuming you are fitting a condensing combi). Check a boiler manual (e.g. http://www.potterton.co.uk/products/...tallManual.pdf) which gives a diagram of the allowed locations for a flue. For example the flue must not be positioned with 30cm of an opening. |
Combi Boiler locations
"Wingedcat" wrote in message oups.com... EddieH wrote: Doctor Drivel wrote: "EddieH" wrote in message oups.com... HI All I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. No problem under stairs. Thanks so much. I am going to do all the piupework and mount the combi myself, but will then get the plumber in to connect to the gas line. I am grateful that you replied, as I have already started the work. So, no problem if the combi and main gas inlet is in the same location! GREAT NEWS! There are plenty of other restrictions on the siting of your new boiler with respect to the flue and the condensate drain (assuming you are fitting a condensing combi). Check a boiler manual (e.g. http://www.potterton.co.uk/products/...EInstallManual ..pdf) which gives a diagram of the allowed locations for a flue. For example the flue must not be positioned with 30cm of an opening. Third party condensate drain pumps are available. |
Combi Boiler locations
Thanks for all the replies. I have checked out all the restrictions and
have made sure the pressure release is towards the outside and that the overflow is connected to a waste. It's more to do with the gas regs. Seems a bit dangerous to me to have the boiler and the gas in the same location. Else, I think I am OK with all the other restrictions. Thanks again guys and gals(if any) Cheers Eddie Doctor Drivel wrote: "Wingedcat" wrote in message oups.com... EddieH wrote: Doctor Drivel wrote: "EddieH" wrote in message oups.com... HI All I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Does anyone know if this is ok with all the regulations and if a corgi regs will be able to install it in this location? Has anybody else got thir combi in the same location as gas inlets? Any answers for registered gorgi plumbers would be appreciated. No problem under stairs. Thanks so much. I am going to do all the piupework and mount the combi myself, but will then get the plumber in to connect to the gas line. I am grateful that you replied, as I have already started the work. So, no problem if the combi and main gas inlet is in the same location! GREAT NEWS! There are plenty of other restrictions on the siting of your new boiler with respect to the flue and the condensate drain (assuming you are fitting a condensing combi). Check a boiler manual (e.g. http://www.potterton.co.uk/products/...EInstallManual .pdf) which gives a diagram of the allowed locations for a flue. For example the flue must not be positioned with 30cm of an opening. Third party condensate drain pumps are available. |
Combi Boiler locations
"EddieH" wrote in message ups.com... Thanks for all the replies. I have checked out all the restrictions and have made sure the pressure release is towards the outside and that the overflow is connected to a waste. It's more to do with the gas regs. Seems a bit dangerous to me to have the boiler and the gas in the same location. Else, I think I am OK with all the other restrictions. Thanks again guys and gals(if any) The pressure relief pipe must go through the wall to outside. The an elbow down, then and elbow facing towards the wall. If it blows off it will then not scald anyone. |
Combi Boiler locations
I wish to install a combi boiler, but the only location I have for it
would be below the stairs. The main gas inlet for my home is also in this location. Sounds like an excellent place for it, if the installation is viable. Christian. |
Combi Boiler locations
In article ,
Christian McArdle wrote: I wish to install a combi boiler, but the only location I have for it would be below the stairs. The main gas inlet for my home is also in this location. Sounds like an excellent place for it, if the installation is viable. Might be a problem in a halls adjoining semi. ;-) -- *If one synchronized swimmer drowns, do the rest have to drown too? Dave Plowman London SW To e-mail, change noise into sound. |
All times are GMT +1. The time now is 10:56 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter