UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
 
Posts: n/a
Default Wall mounting lcd tv

we've recently purchaced an lcd tv and eventually want it wall mounted,
this has got me thinking, the power supply and coax arn't a problem as
these can be chased into the wall but what about the scart leads? Also
the sky receiver can go in another room but what about the vcr and dvd?
i would be greatfull for any sugestions or experiences of the best way
to conceal the 'workings' when wall mounting a tv

  #2   Report Post  
Christian McArdle
 
Posts: n/a
Default Wall mounting lcd tv

we've recently purchaced an lcd tv and eventually want it wall mounted,
this has got me thinking, the power supply and coax arn't a problem as
these can be chased into the wall but what about the scart leads? Also
the sky receiver can go in another room but what about the vcr and dvd?
i would be greatfull for any sugestions or experiences of the best way
to conceal the 'workings' when wall mounting a tv


Don't bother with the co-ax. Just use the TV as a monitor and run a single
S-Video (if supported by the DVD/STB) or SCART (more likely) to where the
boxes are. Use an AV amplifier to switch the video signals and don't bother
using the pathetic speakers likely to be installed in the TV.

Christian.


  #3   Report Post  
Rich
 
Posts: n/a
Default Wall mounting lcd tv

I know you can get wired repeaters for infrared remote controls - very
handy if your Sky/ DVD boxe are located out of the way, and out of the
line of sight from the sofa.

Not sure of who makes them, but a search should do the trick. In fact,
I'm sure there are wired versions too.

  #4   Report Post  
 
Posts: n/a
Default Wall mounting lcd tv

Be careful how HIGH you mount the monitor. It might look and feel fine
for ten minutes of the News but your neck might start aching during a
90 minute film. The eyes/head like to look slightly down. Try it
first with a computer monitor on a desk or table and you sitting in a
low couch or on the floor.

Chris.

  #5   Report Post  
Christian McArdle
 
Posts: n/a
Default Wall mounting lcd tv

Be careful how HIGH you mount the monitor. It might look and feel fine
for ten minutes of the News but your neck might start aching during a
90 minute film. The eyes/head like to look slightly down. Try it
first with a computer monitor on a desk or table and you sitting in a
low couch or on the floor.


Yes, whilst many people dream of putting one above the fireplace like a
mirror, such a solution is ergonmically disasterous and will result in
serious chiropractic bills.

Christian.




  #6   Report Post  
Rob Morley
 
Posts: n/a
Default Wall mounting lcd tv

In article , cmcardle75
@nospam.yahooxxxx.co.uk says...
Be careful how HIGH you mount the monitor. It might look and feel fine
for ten minutes of the News but your neck might start aching during a
90 minute film. The eyes/head like to look slightly down. Try it
first with a computer monitor on a desk or table and you sitting in a
low couch or on the floor.


Yes, whilst many people dream of putting one above the fireplace like a
mirror, such a solution is ergonmically disasterous and will result in
serious chiropractic bills.

Unless you only watch it from a semi-reclined La-Z-Boy :-)
  #7   Report Post  
Dave Plowman (News)
 
Posts: n/a
Default Wall mounting lcd tv

In article .com,
wrote:
we've recently purchaced an lcd tv and eventually want it wall mounted,
this has got me thinking, the power supply and coax arn't a problem as
these can be chased into the wall but what about the scart leads? Also
the sky receiver can go in another room but what about the vcr and dvd?
i would be greatfull for any sugestions or experiences of the best way
to conceal the 'workings' when wall mounting a tv


You can buy SCART cable by the metre from Maplin, etc. And chassis mounted
SCART sockets that can be mounted into a blank plate of your choice to
match the other sockets, etc. And this will fit into a standard 35mm
backing box. Obviously the cable has to be stripped and soldered - but
this is nothing like as difficult as it may sound if you haven't done it
before. Then having got the confidence you can make up some SCART leads of
exactly the right length to go from the socket to the TV. ;-)

--
*On the other hand, you have different fingers.

Dave Plowman London SW
To e-mail, change noise into sound.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall Mounting a Plasma Screen JohnB UK diy 6 June 9th 05 03:02 PM
Wall mounting cabinet hardware, question? To cleat or not to? .HMFIC@1369 Woodworking 11 May 15th 05 05:50 PM
mounting kitchen cabinet on stone wall Jack Home Repair 2 May 8th 05 05:05 AM
HELP: vertical foundation crack in new construction Zhixin Tang Home Repair 46 October 26th 03 01:53 PM
Wall falling down? Alex UK diy 8 August 29th 03 10:54 AM


All times are GMT +1. The time now is 07:23 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"