Problems with Paint Adhesion on Old Wood
Hi,
I've just started to repaint a repaired sash window frame, about 1901 vintage. I say repaired, but I ended up replacing most of the wood with new, so only the top section is actually the original. Unfortunately, although the undercoat (Dulux Weathershield) is going onto the new wood without any excitement, on the old section it is forming into streaks looking like very exaggerated brush strokes. That is, after a few seconds, you can see the wood between lines of paint that roughly follow the brushing direction. The new wood got a coat of Weathershield primer/preservative, but the old wood was treated with Ronseal wood preservative prior to this (and after all the old paint was removed), so I expect that this is the problem, even though the Ronseal tin says it can be painted over. I gave part of the problem area a second coat (after the 20 mins or so it took to go round the rest of the frame) and this looks a lot better, which might be a good sign, but I'm worried about the long-term adhesion. What's the best way to proceed ? Carry on and hope for the best, or somehow strip off the Ronseal preservative and start again ? Cheers, Phil Young |
Problems with Paint Adhesion on Old Wood
What's the best way to proceed ? Carry on and hope for the best, or somehow strip off the Ronseal preservative and start again ? It sounds like the stuff that's half stain and half varnish. I painted over it on somebody's front door a couple of years back. Looks okay but chips easily. Paint stripper and wire wool would be my choice, followed by a coat of 2 part wood hardener. Paint goes on like a dream once you've firmed up the surface |
Problems with Paint Adhesion on Old Wood
On Mon, 26 Jul 2004 15:25:14 GMT, "Phil Young"
wrote: The new wood got a coat of Weathershield primer/preservative, but the old wood was treated with Ronseal wood preservative prior to this (and after all the old paint was removed), so I expect that this is the problem, even though the Ronseal tin says it can be painted over. Hi, I'd expect it's best to prime the old wood too, just because it can be painted over doesn't mean it always the right way to go. I gave part of the problem area a second coat (after the 20 mins or so it took to go round the rest of the frame) and this looks a lot better, which might be a good sign, but I'm worried about the long-term adhesion. Maybe contact Dulux and ask whether their undercoat is suitable for bare wood that's old. cheers, Pete. |
Problems with Paint Adhesion on Old Wood
On Mon, 26 Jul 2004 15:25:14 GMT, "Phil Young"
wrote: What's the best way to proceed ? Carry on and hope for the best, or somehow strip off the Ronseal preservative and start again ? Oops, missed that last bit +) Sounds like you're painting undercoat over wood stain. Maybe give Dulux a call and see what they say. cheers, Pete. |
Problems with Paint Adhesion on Old Wood
On Mon, 26 Jul 2004 22:03:31 +0100, stuart noble wrote:
What's the best way to proceed ? Carry on and hope for the best, or somehow strip off the Ronseal preservative and start again ? It sounds like the stuff that's half stain and half varnish. I painted over it on somebody's front door a couple of years back. Looks okay but chips easily. Paint stripper and wire wool would be my choice, followed by a coat of 2 part wood hardener. Paint goes on like a dream once you've firmed up the surface So no car body filler then ????? It doesn't look too bad after two and a half coats, so I'll probably just proceed with the gloss and keep a lookout for how it wears. If no good, I'll probably try what you suggest. I only bothered with the Ronseal stuff because I didn't realise that the Dulux weathershield 'primer' was similar - I was expecting something like an acrylic primer. Cheers, Phil Young |
Problems with Paint Adhesion on Old Wood
On Mon, 26 Jul 2004 22:26:33 +0100, Pete C wrote:
Hi, I'd expect it's best to prime the old wood too, just because it can be painted over doesn't mean it always the right way to go. It did - the old wood got Ronseal preservative, the Dulux 'primer' (which seems to be more preserative rather than a normal primer), then undercoat. It doesn't look too bad now after '2 1/2' coats, time will tell. Maybe contact Dulux and ask whether their undercoat is suitable for bare wood that's old. cheers, Pete. Good idea, I'll try them if there is a problem. They'll just blame the Ronseal I expect. Thanks, Phil Young |
Problems with Paint Adhesion on Old Wood
Phil Young wrote in message ... So no car body filler then ????? Well, now that you mention it........ |
All times are GMT +1. The time now is 11:21 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter