|
MDF Skirting
I need to fit some new MDF skirting since fitting a laminate floor. What is
the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). John |
john wrote:
I need to fit some new MDF skirting since fitting a laminate floor. What is the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). John This has been covered before about skirting further down somewhere. Not MDF mind, lets hope you don't have a flood. :-( |
ben wrote:
john wrote: I need to fit some new MDF skirting since fitting a laminate floor. What is the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). John This has been covered before about skirting further down somewhere. Not MDF mind, lets hope you don't have a flood. :-( By the way how much is that MDF skirting a foot? 5" taurus wood skirting where i am is 55p a foot. |
ben wrote:
[snip] By the way how much is that MDF skirting a foot? 5" taurus wood skirting where i am is 55p a foot. Jesus! screwfix do it for £19.99, 2.5m 5" taurus same lenght would be £4.12 |
In message , ben
writes ben wrote: [snip] By the way how much is that MDF skirting a foot? 5" taurus wood skirting where i am is 55p a foot. Jesus! screwfix do it for £19.99, 2.5m Can't remember what I paid but it was nothing like that price. It has it's benefits, it's very stable and unlikely to warp, it's nicely finished and primed so finishing is quick. -- Chris French |
In message , john
writes I need to fit some new MDF skirting since fitting a laminate floor. What is the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). Drill and screw or use frame fixings, fill (or plug) and sand. Plenty of [previous threads on fixing skirting. -- Chris French |
"ben" wrote in message .uk... ben wrote: [snip] By the way how much is that MDF skirting a foot? 5" taurus wood skirting where i am is 55p a foot. Jesus! screwfix do it for £19.99, 2.5m Perhaps theirs is genuine bull-profile, which is very expensive to make. I can't find their MDF skirting, but, to be fair to Screwfix (why?) they sell softwood torus for 56p/ft (pack of 4, 2400 x 119 x 15, cat no 91979) -- Kevin Poole **Use current month and year to reply (e.g. )*** Car Transport by Tiltbed Trailer - based near Derby |
In message , chris French
writes In message , ben writes ben wrote: [snip] By the way how much is that MDF skirting a foot? 5" taurus wood skirting where i am is 55p a foot. Jesus! screwfix do it for £19.99, 2.5m Can't remember what I paid but it was nothing like that price. It has it's benefits, it's very stable and unlikely to warp, it's nicely finished and primed so finishing is quick. I don't know about price but, if finished in white, it tends to *yellow* over time. We have re-painted since the original fitting and it now looks OK. Fixing was cut nails into blockwork. regards -- Tim Lamb |
Autolycus wrote:
genuine bull-profile What's that, then? |
On Fri, 02 Sep 2005 21:55:32 GMT, "john"
wrote: I need to fit some new MDF skirting since fitting a laminate floor. What is the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). John Use a plug cutter and a counter bore bit. (e.g. Axminster Power Tools 300532) This will give you counterbored holes in the skirting which you can then use to attach it to the wall with wall plugs and screws. You then use the plug cutter and a piece of scrap skirting board material to produce some plugs. These are fitted into the holes with dabs of glue and you can then sand off the surface when dry for an invisible result. -- ..andy To email, substitute .nospam with .gl |
Andy Hall wrote:
Use a plug cutter and a counter bore bit. (e.g. Axminster Power Tools 300532) On MDF? I understand plugging on nice hardwood skirting, and even on softwood skirting, but would you really bother on MDF? -- Grunff |
"Andy Hall" wrote in message ... On Fri, 02 Sep 2005 21:55:32 GMT, "john" wrote: I need to fit some new MDF skirting since fitting a laminate floor. What is the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). John Use a plug cutter and a counter bore bit. (e.g. Axminster Power Tools 300532) This will give you counterbored holes in the skirting which you can then use to attach it to the wall with wall plugs and screws. You then use the plug cutter and a piece of scrap skirting board material to produce some plugs. These are fitted into the holes with dabs of glue and you can then sand off the surface when dry for an invisible result. -- .andy To email, substitute .nospam with .gl Thanks - will search for previous threads. The skirting I am using is Beech finished MDF to match the floor. John |
"Chris Bacon" wrote in message ... Autolycus wrote: genuine bull-profile What's that, then? Taurus cf torus. Knew I should have put a smiley. -- Kevin Poole **Use current month and year to reply (e.g. )*** Car Transport by Tiltbed Trailer - based near Derby |
Autolycus wrote:
"ben" wrote in message .uk... ben wrote: [snip] By the way how much is that MDF skirting a foot? 5" taurus wood skirting where i am is 55p a foot. Jesus! screwfix do it for £19.99, 2.5m Perhaps theirs is genuine bull-profile, which is very expensive to make. I can't find their MDF skirting, but, to be fair to Screwfix (why?) they sell softwood torus for 56p/ft (pack of 4, 2400 x 119 x 15, cat no 91979) £40/45 to do a room, in MDF £20/25 in Taurus(wood) :-) |
In article ,
Grunff wrote: On MDF? I understand plugging on nice hardwood skirting, and even on softwood skirting, but would you really bother on MDF? I would - I enjoy doing it.;-) But filling a hole in something like MDF with any proprietary filler tends to show through the paint to some extent. -- *Learn from your parents' mistakes - use birth control. Dave Plowman London SW To e-mail, change noise into sound. |
|
On Sat, 03 Sep 2005 10:12:29 +0100, Grunff wrote:
Andy Hall wrote: Use a plug cutter and a counter bore bit. (e.g. Axminster Power Tools 300532) On MDF? I understand plugging on nice hardwood skirting, and even on softwood skirting, but would you really bother on MDF? Sure. I've done this for various forms of construction in MDF. -- ..andy To email, substitute .nospam with .gl |
On Sat, 03 Sep 2005 09:20:11 GMT, "john"
wrote: Thanks - will search for previous threads. The skirting I am using is Beech finished MDF to match the floor. John OK. You should find that if you are careful with the plug cutting that the veneer will remain stuck to the MDF. However, the fitting technique would be a little different. After popping the plugs out of the piece of material used to make them, you will need to remove some of the MDF from the back as you can't sand the surface. You should then be able to push the plug into place flush with the surface using a block of wood and gently tapping with a hammer. Obviously practice a bit first and if there is a noticable grain, try to align the grains of the plug and the base material. -- ..andy To email, substitute .nospam with .gl |
Owain wrote:
Grunff wrote: Andy Hall wrote: Use a plug cutter and a counter bore bit. (e.g. Axminster Power Tools 300532) On MDF? I understand plugging on nice hardwood skirting, and even on softwood skirting, but would you really bother on MDF? Yes, and make sure the screw slots are all lined up before putting the plugs in. Owain And greased for easy removal..... |
Owain wrote:
Yes, and make sure the screw slots are all lined up before putting the plugs in. Come on - you know I only use Torx screws... -- Grunff |
john wrote:
I need to fit some new MDF skirting since fitting a laminate floor. What is the neatest way of fixing it to the wall. (more than glue is needed to pull it in whare the walls bow in a bit). John IMO the mdf should sit nice and straight. If your walls aren't, fill behind the skirting and treat the filler as part of the wall. Wavy skirting is just not on. |
Stuart Noble wrote:
IMO the mdf should sit nice and straight. If your walls aren't, fill behind the skirting and treat the filler as part of the wall. Wavy skirting is just not on. I was going to say that... but you got there first ;-) -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
In message , John
Rumm writes Stuart Noble wrote: IMO the mdf should sit nice and straight. If your walls aren't, fill behind the skirting and treat the filler as part of the wall. Wavy skirting is just not on. I was going to say that... but you got there first ;-) Hmm, I think it's very much depends situation, in some situations yes, other times I think it is better to have the skirting fitted closer to the wall. -- Chris French |
On Sun, 04 Sep 2005 05:19:52 +0100, John Rumm
wrote: Stuart Noble wrote: IMO the mdf should sit nice and straight. If your walls aren't, fill behind the skirting and treat the filler as part of the wall. Wavy skirting is just not on. I was going to say that... but you got there first ;-) It depends on how wavy the wall is. If it's fairly gentle curves along the whole length, then it's visually better to make the skirting conform to the wall. -- ..andy To email, substitute .nospam with .gl |
| All times are GMT +1. The time now is 03:08 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter