Short fat masonry bits
 

Is there a supplier of short fat masonry bits? Tool station only goes
up to 20mm, but I'd like 25 or 26 around 100-150mm long.

Thanks

Mr F.

"Mr Fizzion" wrote in message
...
Is there a supplier of short fat masonry bits? Tool station only goes
up to 20mm, but I'd like 25 or 26 around 100-150mm long.

Thanks

Mr F.

Google for 25mm masonry bits several uk sites never used any of them but
looked cheap enough

Tony

Mr Fizzion wrote:

Is there a supplier of short fat masonry bits? Tool station only goes
up to 20mm, but I'd like 25 or 26 around 100-150mm long.

As you probably found most conventional drill bits of that diameter are
usually more like 400mm long.

You could use a short core drill however. Something like:

http://www.screwfix.com/app/sfd/cat/...93729&id=17419

Complete with arbour would probably be less than 150mm long.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/