DIYbanter - That Little O Ring on M10 ended Tails

DIYbanter (https://www.diybanter.com/)

- UK diy (https://www.diybanter.com/uk-diy/)

- - That Little O Ring on M10 ended Tails (https://www.diybanter.com/uk-diy/114975-little-o-ring-m10-ended-tails.html)

[email protected]

July 28th 05 07:02 PM

That Little O Ring on M10 ended Tails

How important is it? I have managed to nadge about 4 now everytime I
screw and unscrew the tails into the tap body they seem to shred. Can I
just PTFE tape the ends instead?

TIA

Richard

Andrew Gabriel

July 28th 05 07:22 PM

In article .com,
writes:
How important is it? I have managed to nadge about 4 now everytime I
screw and unscrew the tails into the tap body they seem to shred. Can I
just PTFE tape the ends instead?

Sounds like there's some burr on one of the parts.
I sometimes use a smear of silicone grease on O-rings
which slide on mating surfaces.

--
Andrew Gabriel

All times are GMT +1. The time now is 02:30 AM.