Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Adhesion of "grippy non-slip matting"?
"Zak" wrote in message ... I used some non-slip mesh matting on a melamine surface and also on a clear plastic surface. After a few months the matting had marked both these surfaces and the marking was extremely difficult to remove. Is some matting available in the retail shops made of a different (and less marking) compound. Or is almost all of these non-slip mattings made of the same compound? Car mats are good for this. Cut the mat to the size you need. I've found that they are good for non-slip and don't mark the surface at all. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Frugal non slip throw rugs? | Home Ownership | |||
Compression slip couplers | UK diy | |||
Repairing 3" PVC stack w/ slip coupling | Home Repair |