Wood Veneer contiboard
 

Does anybody know if contiboard is still made with a plain wood veneer? I'm
looking for a genuine veneer which can be sanded and varnished rather than
the plastic 'wood effect' product.

Tia,

Cic.

Wood Veneer contiboard
 

On Thu, 22 Jul 2004 07:39:10 GMT, "Cicero"
wrote:

Does anybody know if contiboard is still made with a plain wood veneer? I'm
looking for a genuine veneer which can be sanded and varnished rather than
the plastic 'wood effect' product.

Tia,

Cic.




Do you mean actual Contiboard ? (It is a trade name)

Veneered plywood, chipboard or mdf is easily available from your local
timeber merchant.

Paul Mc Cann

Wood Veneer contiboard
 

Cicero wrote:

Does anybody know if contiboard is still made with a plain wood veneer? I'm
looking for a genuine veneer which can be sanded and varnished rather than
the plastic 'wood effect' product.

MDF certainly is.

Tia,

Cic.

Wood Veneer contiboard
 

Cicero wrote in message ...
Does anybody know if contiboard is still made with a plain wood veneer?
It was in my Homebase 3 months ago, labelled as "real wood veneer". It's
sapele I think and takes a woodworking bleach very well if you want a paler
finish (it goes dark orange when varnished otherwise). Won't stand much
sanding though.

Wood Veneer contiboard
 

A good timber merchant will also have veneered blockboard. I used it (American
white oak) when fitting out my newly lengthened narrowboat. Expensive stuff,
but a joy to work with and very attractive.

Wood Veneer contiboard
 

"Cicero" wrote in message
...
Does anybody know if contiboard is still made with a plain wood veneer?
I'm
looking for a genuine veneer which can be sanded and varnished rather
than
the plastic 'wood effect' product.

Tia,

Cic.

==================
Thanks to all who replied. I really did mean 'contiboard' because it's 5/8"
(16mm approx) rather than the more usual sheet sizes of 12mm / 18 mm etc. It
also has finished long edges which saves a lot of work.

I'll try Homebase to see if it's there but otherwise I'll probably have to
compromise on thickness and try one of the alternative suggestions.

Many thanks,

Cic.

Wood Veneer contiboard
 

Cicero wrote:
"Cicero" wrote in message
...
Does anybody know if contiboard is still made with a plain wood
veneer? I'm looking for a genuine veneer which can be sanded and
varnished rather than the plastic 'wood effect' product.

Tia,

Cic.

==================
Thanks to all who replied. I really did mean 'contiboard' because
it's 5/8" (16mm approx) rather than the more usual sheet sizes of
12mm / 18 mm etc. It also has finished long edges which saves a lot
of work.

I'll try Homebase to see if it's there but otherwise I'll probably
have to compromise on thickness and try one of the alternative
suggestions.

Many thanks,

Cic.

You can definitly buy it in B&Q, I bought a 8 foot x 18 inch board in light
oak only a couple of weeks ago. If I remember correctly there was 3 or 4
different finishes in 'real' veneer and about 6 in the plastic variety. As
a previous poster said it wont take a lot of sanding abuse though.

HTH

John

Wood Veneer contiboard
 

Cicero wrote in message ...
I'll try Homebase to see if it's there but otherwise I'll probably have to
compromise on thickness and try one of the alternative suggestions.
It's definitely around. My local Champions Timber also do a version of it
though I found it inferior to Conti.

Wood Veneer contiboard
 

"stuart noble" wrote in message
...

Cicero wrote in message ...
I'll try Homebase to see if it's there but otherwise I'll probably have
to
compromise on thickness and try one of the alternative suggestions.
It's definitely around. My local Champions Timber also do a version of it
though I found it inferior to Conti.


======================
Many thanks again to all respondents. I checked in 'Homebase' this afternoon
and sure enough it's there! Rather expensive at £4.99p for 8' x 6" so I'll
have another look at other suggested places.

Strangely, I've looked quite carefully in Wickes, B&Q and Focus over the
past few weeks and no sign of it anywhere. Maybe it's a regional thing.

I'm also aware of the limitations on sanding because I still have a few
items of furniture I made from it about 30 years ago and found it very easy
to sand through the veneer. Gentle hand sanding is called for!


Cic.