 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
16" swing lathe?
Does this South Bend lathe look like a 16"-swing?
Seems like a 10L or 13" to me. The UMD cabinet is bigger on the 14-1/2" and 16"ers. http://cgi.ebay.com/ws/eBayISAPI.dll...4408 788&rd=1 |
|
#2
|
|||
|
|||
|
Looks like a good bit more swing than my 10L, I was looking at that one a
few days ago, no desire to buy just wondering if it is a 16". I just picked up a newer 14" and have been looking for all the info I can on the bigger SB lathes"ebayer" wrote in message ... Does this South Bend lathe look like a 16"-swing? Seems like a 10L or 13" to me. The UMD cabinet is bigger on the 14-1/2" and 16"ers. http://cgi.ebay.com/ws/eBayISAPI.dll...4408 788&rd=1 |
|
#3
|
|||
|
|||
|
It looks like a 16, ask the seller to double check the plate on the gearbox
or side cover, it will state the machine size. Good Luck, Tony "ebayer" wrote in message ... Does this South Bend lathe look like a 16"-swing? Seems like a 10L or 13" to me. The UMD cabinet is bigger on the 14-1/2" and 16"ers. http://cgi.ebay.com/ws/eBayISAPI.dll...4408 788&rd=1 |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Kelton Balancer Review Draft--long | Woodturning | |||
| Lathe Size?(Measure Lathe Swing) | Woodturning | |||
| A Video for Beginners (a bit long) | Woodturning | |||
| My $20 lathe (well, sort of...) | Woodworking | |||
| Bowl Saving: A Comprehensive Discussion | Woodturning | |||
Linear Mode
